% Suppress output from showexpl to stdout.
\let\SX@Info\relax
+%%%%%%%% colors
+%% modified from http://jfly.iam.u-tokyo.ac.jp/colorset/
+\usepackage{transparent}
+\definecolor{red}{rgb}{1, 0.16, 0}
+\definecolor{blue}{rgb}{0, 0.25, 1}
+\definecolor{gray}{rgb}{.50, .53, .56}
+\definecolor{green}{rgb}{.21, .63, .42}
+\definecolor{cyan}{rgb}{0.40, .80, 1}
+\definecolor{b_gray}{rgb}{0.78, 0.78, 0.80}
+\definecolor{b_pink}{rgb}{1, 0.82, 0.82}
+\definecolor{b_green}{rgb}{.53, .91, .69}
+\definecolor{b_cyan}{rgb}{0.70, .92, 98}
+
%%%%%%%% hyperref
\usepackage{hyperref,bookmark}
%<*en>
\end{verbatim}
設定値は「横組」「縦組及び \cs{utod} 方向」「\cs{dtou} 方向」
-の3種ごとに独立して記録される.……のときにどのようにボックスが配置されるか
-は,Gitリポジトリ内の \verb+test/test55-boxdim_diffdir.{tex,pdf}+ を
-参照してほしい.
+の3種ごとに独立して記録される.参考として,Gitリポジトリ内の
+ \verb+test/test55-boxdim_diffdir.{tex,pdf}+ を挙げておく.
\end{cslist}
%</ja>
\begin{table}[t]
-%<en>\caption{Differences between JFMs shipped with \LuaTeX-ja}
-%<ja>\caption{\LuaTeX-ja に同梱されている JFM の違い}
+%<en>\caption{Differences between horizontal JFMs shipped with \LuaTeX-ja}
+%<ja>\caption{\LuaTeX-ja に同梱されている横組用JFMの違い}
%<en>\medskip
\label{tab-difjfm}
\ltjsetparameter{jacharrange={+3}}
\centering\small
-\def\r#1{{\jfont\g=file:KozMinPr6N-Regular.otf:jfm=#1 at 14.43324pt \g
-\setbox0=\vtop{\hsize=7\zw\noindent ◆◆◆◆◆◆◆
-ある日モモちゃんがお使いで迷子になって泣きました.}\copy0
-\vrule height 0pt depth \dp0}}
-\def\s#1{{\jfont\g=file:KozMinPr6N-Regular.otf:jfm=#1 at 14.43324pt \g
-\setbox0=\vtop{\hsize=7\zw\noindent ちょっと!何}\copy0}}
-\def\t#1{{\jfont\g=file:KozMinPr6N-Regular.otf:jfm=#1 at 19.24432pt \g
-\setbox0=\hbox{漢}%
-\vrule width 0.4pt height\ht0 depth\dp0\kern-.2pt\copy0
-\kern-\wd0\vrule width\wd0height .2pt depth .2pt
-\kern-\wd0\raise\ht0\hbox{\vrule width\wd0height .2pt depth .2pt}%
-\kern-\wd0\lower\dp0\hbox{\vrule width\wd0height .2pt depth .2pt}%
-\kern-.2pt\vrule width 0.4pt height\ht0 depth \dp0}}
-\begin{tabular}{rccc}
-\toprule
-&\tt jfm-ujis.lua&\tt jfm-jis.lua&\tt jfm-min.lua\\
-\midrule
-%<en>Example~1~\cite{min10}
-%<ja>例1~\cite{min10}
-&\r{ujis}&\r{jis}&\r{min}\\
-%<en>Example~2
-%<ja>例2
-&\s{ujis}&\s{jis}&\s{min}\\
-Bounding Box&\t{ujis}&\t{jis}&\t{min}\\
-\bottomrule
-\end{tabular}
+\def\r#1#2{%
+ \hbox{\Large\vrule
+ \parbox[b]{7\zw}{%
+ \addjfontfeatures{YokoFeatures={Opacity=0.5, Color=#2, JFM=#1}}\noindent
+ ◆◆◆◆◆◆◆
+ ある日モモちゃんがお使いで迷子になって泣きました.
+ }\vrule}}
+\def\s#1#2{%
+ \Large
+ \parbox[b]{7\zw}{%
+ \addjfontfeatures{YokoFeatures={Opacity=0.5, Color=#2, JFM=#1}}\noindent
+ ちょっと!何
+ }}
+\def\t#1#2#3{\hbox to 0pt{\hss%
+ \setbox0=\hbox{\addjfontfeatures{YokoFeatures={JFM=#1}}\huge #3}%
+ \textcolor{#2}{\transparent{0.5}\vrule width 0.4pt height\ht0 depth\dp0}\kern-.2pt\copy0
+ \textcolor{#2}{\transparent{0.5}\kern-\wd0\vrule width\wd0height .2pt depth .2pt
+ \kern-\wd0\raise\ht0\hbox{\vrule width\wd0height .2pt depth .2pt}%
+ \kern-\wd0\lower\dp0\hbox{\vrule width\wd0height .2pt depth .2pt}%
+ \kern-.2pt\vrule width 0.4pt height\ht0 depth \dp0}\hss}}
+{\Large\tabcolsep0pt
+\begin{tabular}{m{8\zw}m{8\zw}m{8\zw}}
+\leavevmode\hbox to 0pt{\r{ujis}{blue}\hss}\r{jis}{black}&
+\leavevmode\hbox to 0pt{\r{jis}{black}\hss}\r{min}{red}&
+\leavevmode\hbox to 0pt{\r{ujis}{blue}\hss}\r{min}{red}\\
+\leavevmode\hbox to 0pt{\s{ujis}{blue}\hss}\s{jis}{black}&
+\leavevmode\hbox to 0pt{\s{jis}{black}\hss}\s{min}{red}&
+\leavevmode\hbox to 0pt{\s{ujis}{blue}\hss}\s{min}{red}\\
+\leavevmode\qquad\t{ujis}{blue}{漢}\t{jis}{black}{漢}\qquad
+ \t{ujis}{blue}{っ}\t{jis}{black}{っ}&
+\leavevmode\qquad\t{jis}{black}{漢}\t{min}{red}{漢}\qquad
+ \t{jis}{black}{っ}\t{min}{red}{っ}&
+\leavevmode\qquad\t{ujis}{blue}{漢}\t{min}{red}{漢}\qquad
+ \t{ujis}{blue}{っ}\t{min}{red}{っ}\\
+\end{tabular}\par}
+
+(\textcolor{blue}{Blue: \texttt{jfm-ujis.lua}},
+\textcolor{black}{Black: \texttt{jfm-jis.lua}},
+\textcolor{red}{Red: \texttt{jfm-min.lua}})
\ltjsetparameter{jacharrange={-3}}
\end{table}
-
\begin{cslist}
\item[jfm=<name>]
%<*en>
%<en>\subsection{\cs{tfont}}
%<ja>\subsection{\cs{tfont} 命令}
+
+\begin{table}[t]
+%<en>\caption{Differences between vertical JFMs shipped with \LuaTeX-ja}
+%<ja>\caption{\LuaTeX-ja に同梱されている縦組用 JFM の違い}
+%<en>\medskip
+\label{tab-difjfm-tate}
+\catcode`\<=12\catcode`\>=12
+\ltjsetparameter{jacharrange={+3}}
+\small
+
+\def\r#1#2{%
+ \hbox{\tate\Large\vrule
+ \parbox{7\zw}{%
+ \addjfontfeatures{TateFeatures={Opacity=0.5, Color=#2, JFM=#1}}\noindent
+ ◆◆◆◆◆◆◆
+ ある日モモちゃんがお使いで迷子になって泣きました.
+ }\vrule}}
+\def\s#1#2{%
+ \hbox{\tate\Large
+ \parbox{7\zw}{%
+ \addjfontfeatures{TateFeatures={Opacity=0.5, Color=#2, JFM=#1}}\noindent
+ ちょっと!何
+ }}}
+\def\t#1#2#3{\hbox to 0pt{\hss%
+ \setbox0=\hbox{\addjfontfeatures{TateFeatures={JFM=#1}}\huge #3}%
+ \textcolor{#2}{\transparent{0.5}\vrule width 0.4pt height\ht0 depth\dp0}\kern-.2pt\copy0
+ \textcolor{#2}{\transparent{0.5}\kern-\wd0\vrule width\wd0height .2pt depth .2pt
+ \kern-\wd0\raise\ht0\hbox{\vrule width\wd0height .2pt depth .2pt}%
+ \kern-\wd0\lower\dp0\hbox{\vrule width\wd0height .2pt depth .2pt}%
+ \kern-.2pt\vrule width 0.4pt height\ht0 depth \dp0}\hss}}
+
+\begin{minipage}{.7\textwidth}
+\centering
+\leavevmode\hbox to 0pt{\r{ujisv}{blue}\hss}\r{tmin}{red}\quad
+\leavevmode\hbox to 0pt{\s{ujisv}{blue}\hss}\s{tmin}{red}\quad
+\raise4\zw\hbox{\tate\Large\t{ujisv}{black}{漢}\t{tmin}{red}{漢}\qquad
+ \t{ujisv}{black}{っ}\t{tmin}{red}{っ}}
+\end{minipage}%
+\begin{minipage}{.3\textwidth}
+\textcolor{blue}{Blue: \texttt{jfm-ujisv.lua}}\\
+\textcolor{red}{Red: \texttt{jfm-tmin.lua}}
+\end{minipage}
+\ltjsetparameter{jacharrange={-3}}
+\end{table}
+
%<*en>
...
%</en>
%<*ja>
\cs{tfont} はフォントを縦組用の和文フォントとして読み込む命令であり,
-\cs{jfont} の文法は \cs{jfont} と同じである.
+\cs{tfont} の文法は \cs{jfont} と同じである.
\cs{tfont} で定義された縦組用和文フォントは,
以下の点が \cs{jfont} による横組用和文フォントとは異なる:
\begin{itemize}
\tfont\S=file:KozMinPr6N-Regular.otf:jfm=ujis % OK
\end{verbatim}
\item \ref{ssec-math}節で述べる,数式中の和文フォントには縦組用和文フォントは指定できない.
- \item \texttt{jfm=<name>}\ の部分には縦組用JFMを指定する.現在同梱されているのは,
-OTFパッケージの \verb+upnmlminr-v.tfm+ を元にした\texttt{jfm-ujisv.lua}\ のみである.
+ \item \texttt{jfm=<name>}\ の部分には縦組用JFMを指定する.
+以下の縦組用JFMが\LuaTeX-jaには同梱されており,違いを表\ref{tab-difjfm-tate}に示した.
+\begin{description}
+\item[\tt jfm-ujis.lua] \LuaTeX-jaの標準縦組用JFMである.このJFMは\upTeX で
+ 用いられるUTF/OTFパッケージ用の和文用TFMである \verb+upnmlminr-v.tfm+ を
+ 元にしている.
+\item[\tt jfm-min.lua] \pTeX に同梱されているデフォルトの和文用縦組TFM
+ である \verb+tmin10.tfm+ に相当する.
+\end{description}
\end{itemize}
+
+なお,\pTeX では,\cs{font},~\cs{jfont},~\cs{tfont}のどれでも欧文フォント・横組用和文フォン
+ト・縦組用和文フォントの定義が可能であったが,\LuaTeX-jaではそうでないので注意.
%</ja>
%<en>\subsection{Prefix \texttt{psft}}
\begin{minipage}{0.4\textwidth}%
\begin{center}\unitlength=10pt\small
\begin{picture}(15,12)(-1,-4)
-\color{black!10!white}% jfm
+\color{b_gray}% jfm
\put(0,0){\vrule width 12\unitlength height 8\unitlength depth 3\unitlength}
-\color{red!20!white}% step1
+\color{b_pink}% step1
\put(-1,-1.5){\vrule width 6\unitlength height 7\unitlength depth 2.5\unitlength}
\color{red}% real glyph
\put(-1,5.5){\line(1,0){6}}
\put(-1,-4){\line(1,0){6}}
-\color{green!20!white}% real glyph
+\color{b_green}% real glyph
\put(3,0){\vrule width 6\unitlength height 7\unitlength depth 2.5\unitlength}
\color{black}% jfm
\put(12.2,-1.5){\makebox(0,0)[l]{\texttt{depth}}}
\put(6,0.2){\makebox(0,0)[b]{\texttt{width}}}
-\color{green!50!black}% step1
+\color{green}% step1
\thicklines
\put(3,0){\vector(0,1){7}\vector(0,-1){2.5}\vector(1,0){6}}
\put(9,0){\line(0,1){7}\line(0,-1){2.5}}
\begin{minipage}{0.4\textwidth}%
\begin{center}\unitlength=10pt\small
\begin{picture}(15,12)(-6,0)
-\color{black!10!white}% jfm
+\color{b_gray}% jfm
\put(-6,0){\vrule width 12\unitlength height 11\unitlength}
-\color{red!20!white}% real glyph
+\color{b_pink}% real glyph
\put(-6.5,5.5){\vrule width 8\unitlength height 6\unitlength depth 3\unitlength}
\color{red}% real glyph
\put(-6.5,11.5){\line(1,0){8}}
\put(-6.5,2.5){\line(1,0){8}}
-\color{green!20!white}% step1
+\color{b_green}% step1
\put(-4,3){\vrule width 8\unitlength height 6\unitlength depth 3\unitlength}
\color{black}% jfm
\put(-3,10.8){\makebox(0,0)[t]{\texttt{depth}}}
\put(0.2,5.5){\makebox(0,0)[l]{\texttt{width}}}
-\color{green!50!black}% step1
+\color{green}% step1
\thicklines
\put(-4,3){\vector(0,1){6}\vector(0,-1){3}\vector(1,0){8}}
\put( 4,3){\line(0,1){6}\line(0,-1){3}}
できる.\ref{ssec-psft}節を参照.
%</ja>
+{\catcode`\<=12\catcode`\>=12
\begin{figure}[!tb]
\begin{LTXexample}
\jfontspec[
%<en>\caption{An example of \texttt{TateFeatures} etc.}
\label{fig:yokotate-fontspec}
\end{figure}
+}
\item[TateFeatures=\{<features>\}\textrm{, }TateFont=<font>]
%<en> ...
\def\outbox#1{{\Large%
\ltjsetparameter{kanjiskip=0pt plus .2\zw minus .2\zw}%
\setbox\gridbox=\hbox to 20\zw{\sq\sq\sq\sq\sb\sq\sq\sq\sq\sb\sq\sq\sq\sq\sb\sq\sq\sq\sq\sb}%
- \hbox{\textcolor{cyan!50!white}{\copy\gridbox}\hskip-20\zw%
+ \hbox{\textcolor{cyan}{\copy\gridbox}\hskip-20\zw%
\vbox{\hsize=20\zw\noindent\leftskip0pt\rightskip0pt\parfillskip0pt#1}\vrule}%
}}
->, auto, shorten >=1pt
]
\node [shape=rectangle, font=\scriptsize] (init) at (2,7) {start};
-\node [shape=circle,draw, fill=blue!20] (newline) at (4,7) {$N$};
-\node [shape=circle,draw, fill=blue!20] (midline) at (4,4) {$M$};
-\node [shape=circle,draw, fill=blue!20] (skipspc) at (8,7) {$S$};
-\node [shape=circle,draw, fill=red!20] (kanji) at (8,4) {$K$};
-\node [shape=rectangle,draw, fill=green!20] (scanacs) at (6,8) {scan a c.s.};
+\node [shape=circle,draw, fill=b_cyan] (newline) at (4,7) {$N$};
+\node [shape=circle,draw, fill=b_cyan] (midline) at (4,4) {$M$};
+\node [shape=circle,draw, fill=b_cyan] (skipspc) at (8,7) {$S$};
+\node [shape=circle,draw, fill=b_pink] (kanji) at (8,4) {$K$};
+\node [shape=rectangle,draw, fill=b_green] (scanacs) at (6,8) {scan a c.s.};
\node (endk) at (8,2.5) {} ;
\node (endm) at (4,2.5) {} ;
\node (ends) at (8,8.5) {} ;
luatexja.load_module('jfont'); local ltjf = luatexja.jfont
luatexja.load_module('jfmglue'); local ltjj = luatexja.jfmglue
luatexja.load_module('stack'); local ltjs = luatexja.stack
+luatexja.load_module('direction'); local ltjd = luatexja.direction
local Dnode = node.direct or node
end
-- step 1: 行末に kern を挿入(句読点,中点用)
+local ltjd_glyph_from_packed = ltjd.glyph_from_packed
local function aw_step1(p, res, total)
local x = node_tail(getlist(p)); if not x then return false end
-- x: \rightskip
xc = x
elseif xi == id_hlist and get_attr_icflag(x) == PACKED then
-- packed JAchar
- xc = getlist(x)
+ xc = ltjd_glyph_from_packed(x)
while getid(xc) == id_whatsit do xc = node_next(xc) end
else
return false-- それ以外は対象外.
luatexja.load_module('base'); local ltjb = luatexja.base
luatexja.load_module('stack'); local ltjs = luatexja.stack
-luatexja.load_module('rmlgbm'); local ltjr = luatexja.rmlgbm
luatexja.direction = {}
local attr_dir = luatexbase.attributes['ltj@dir']
end
end
--- 縦書き用字形への変換テーブル
-local font_vert_table = {} -- key: fontnumber
-do
- local font_vert_basename = {} -- key: basename
- local function add_feature_table(tname, src, dest)
- for i,v in pairs(src) do
- if type(v.slookups)=='table' then
- local s = v.slookups[tname]
- if s and not dest[i] then
- dest[i] = s
- end
- end
- end
- end
-
- local function prepare_vert_data(n, id)
- -- test if already loaded
- if type(id)=='number' then -- sometimes id is an integer
- font_vert_table[n] = font_vert_table[id]; return
- elseif (not id) or font_vert_table[n] then return
- end
- local fname = id.filename
- local bname = file.basename(fname)
- if not fname then
- font_vert_table[n] = {}; return
- elseif font_vert_basename[bname] then
- font_vert_table[n] = font_vert_basename[bname]; return
- end
- local vtable = {}
- local a = id.resources.sequences
- if a then
- local s = id.shared.rawdata.descriptions
- for i,v in pairs(a) do
- if v.features.vert or v.features.vrt2 then
- add_feature_table(v.subtables[1], s, vtable)
- end
- end
- end
- font_vert_basename[bname] = vtable
- font_vert_table[n] = vtable
- end
- -- 縦書き用字形への変換
- function luatexja.direction.get_vert_glyph(n, chr)
- local fn = font_vert_table[n]
- return fn and fn[chr] or chr
- end
- luatexbase.add_to_callback('luatexja.define_font',
- function (res, name, size, id)
- prepare_vert_data(id, res)
- end,
- 'prepare_vert_data', 1)
-
- local function a (n, dat) font_vert_table[n] = dat end
- luatexja.rmlgbm.vert_addfunc = a
-
-end
-
-- PACKED の hbox から文字を取り出す
-- luatexja.jfmglue.check_box などで使用
do
--
luatexbase.provides_module({
name = 'luatexja.jfont',
- date = '2014/02/01',
+ date = '2014/08/12',
description = 'Loader for Japanese fonts',
})
module('luatexja.jfont', package.seeall)
luatexja.load_module('base'); local ltjb = luatexja.base
luatexja.load_module('charrange'); local ltjc = luatexja.charrange
+luatexja.load_module('rmlgbm'); local ltjr = luatexja.rmlgbm
+luatexja.load_module('direction'); local ltjd = luatexja.direction
local Dnode = node.direct or node
end
do
+ local get_dir_count = ltjd.get_dir_count
+ local dir_tate = luatexja.dir_table.dir_tate
+ local tex_get_attr = tex.getattribute
-- PUBLIC function
function get_zw()
- local a = font_metric_table[tex.attribute[attr_curjfnt]]
+ local a = font_metric_table[
+ tex_get_attr((get_dir_count()==dir_tate) and attr_curtfnt or attr_curjfnt)]
return a and a.zw or 0
end
function get_zh()
- local a = font_metric_table[tex.attribute[attr_curjfnt]]
+ local a = font_metric_table[
+ tex_get_attr((get_dir_count()==dir_tate) and attr_curtfnt or attr_curjfnt)]
return a and a.zw or 0
end
end
end
return name
end
- luatexja.jfont.extract_metric = extract_metric
+
+ -- define_font callback
+ local otfl_fdr = fonts.definers.read
+ local ltjr_font_callback = ltjr.font_callback
+ function luatexja.font_callback(name, size, id)
+ local new_name = extract_metric(name)
+ local res = ltjr_font_callback(new_name, size, id, otfl_fdr)
+ luatexbase.call_callback('luatexja.define_font', res, new_name, size, id)
+ return res
+ end
+ luatexbase.create_callback('luatexja.define_font', 'simple', function (n) return n end)
+ luatexbase.add_to_callback('define_font',luatexja.font_callback,"luatexja.font_callback", 1)
end
------------------------------------------------------------------------
------------------------------------------------------------------------
--- MISC
+-- 縦書き用字形への変換テーブル
------------------------------------------------------------------------
+local font_vert_table = {} -- key: fontnumber
+do
+ local font_vert_basename = {} -- key: basename
+ local function add_feature_table(tname, src, dest)
+ for i,v in pairs(src) do
+ if type(v.slookups)=='table' then
+ local s = v.slookups[tname]
+ if s and not dest[i] then
+ dest[i] = s
+ end
+ end
+ end
+ end
-local is_ucs_in_japanese_char = ltjc.is_ucs_in_japanese_char_direct
--- EXT: italic correction
-function append_italic()
- local p = to_direct(tex.nest[tex.nest.ptr].tail)
- if p and getid(p)==id_glyph then
- local f = getfont(p)
- local g = node_new(id_kern)
- setfield(g, 'subtype', 1)
- set_attr(g, attr_icflag, ITALIC)
- if is_ucs_in_japanese_char(p) then
- f = has_attr(p, attr_curjfnt)
- local j = font_metric_table[f]
- setfield(g, 'kern', j.char_type[find_char_class(getchar(p), j)].italic)
- else
- local h = font_getfont(f)
- if h then
- setfield(g, 'kern', h.characters[getchar(p)].italic)
+ local function prepare_vert_data(n, id)
+ -- test if already loaded
+ if type(id)=='number' then -- sometimes id is an integer
+ font_vert_table[n] = font_vert_table[id]; return
+ elseif (not id) or font_vert_table[n] then return
+ end
+ local fname = id.filename
+ local bname = file.basename(fname)
+ if not fname then
+ font_vert_table[n] = {}; return
+ elseif font_vert_basename[bname] then
+ font_vert_table[n] = font_vert_basename[bname]; return
+ end
+ local vtable = {}
+ local a = id.resources.sequences
+ if a then
+ local s = id.shared.rawdata.descriptions
+ for i,v in pairs(a) do
+ if v.features.vert or v.features.vrt2 then
+ add_feature_table(v.subtables[1], s, vtable)
+ end
+ end
+ end
+ font_vert_basename[bname] = vtable
+ font_vert_table[n] = vtable
+ end
+ -- 縦書き用字形への変換
+ function get_vert_glyph(n, chr)
+ local fn = font_vert_table[n]
+ return fn and fn[chr] or chr
+ end
+ luatexbase.add_to_callback('luatexja.define_font',
+ function (res, name, size, id)
+ prepare_vert_data(id, res)
+ end,
+ 'prepare_vert_data', 1)
+
+ local function a (n, dat) font_vert_table[n] = dat end
+ ltjr.vert_addfunc = a
+
+end
+
+------------------------------------------------------------------------
+-- MISC
+------------------------------------------------------------------------
+do
+ local is_ucs_in_japanese_char = ltjc.is_ucs_in_japanese_char_direct
+ local tex_set_attr = tex.setattribute
+ -- EXT: italic correction
+ function append_italic()
+ local p = to_direct(tex.nest[tex.nest.ptr].tail)
+ if p and getid(p)==id_glyph then
+ local f = getfont(p)
+ local g = node_new(id_kern)
+ setfield(g, 'subtype', 1)
+ set_attr(g, attr_icflag, ITALIC)
+ if is_ucs_in_japanese_char(p) then
+ f = has_attr(p, attr_curjfnt)
+ local j = font_metric_table[f]
+ setfield(g, 'kern', j.char_type[find_char_class(getchar(p), j)].italic)
else
- tex.attribute[attr_icflag] = 0
- return node_free(g)
+ local h = font_getfont(f)
+ if h then
+ setfield(g, 'kern', h.characters[getchar(p)].italic)
+ else
+ tex_set_attr(attr_icflag, 0)
+ return node_free(g)
+ end
end
+ node_write(g)
+ tex_set_attr(attr_icflag, 0)
end
- node_write(g)
- tex.attribute[attr_icflag] = 0
end
end
local attr_icflag = luatexbase.attributes['ltj@icflag']
local is_ucs_in_japanese_char = ltjc.is_ucs_in_japanese_char_direct
-local ltjd_get_vert_glyph = ltjd.get_vert_glyph
+local ltjf_get_vert_glyph = ltjf.get_vert_glyph
local ltjf_replace_altfont = ltjf.replace_altfont
local attr_orig_char = luatexbase.attributes['ltj@origchar']
local STCK = luatexja.userid_table.STCK
------------------------------------------------------------------------
local wt, wtd = {}, {}
do
+ local ltjd_get_dir_count = ltjd.get_dir_count
local start_time_measure, stop_time_measure
= ltjb.start_time_measure, ltjb.stop_time_measure
local head, real_head
local p = head
for i = 1,#wt do wt[i]=nil end
for i = 1,#wtd do wtd[i]=nil end
- ltjs.list_dir=ltjd.get_dir_count()
+ ltjs.list_dir=ltjd_get_dir_count()
while p do
local flag
local pfunc = suppress_hyphenate_ja_aux[getid(p)]
local pc = getchar(p)
local pf = ltjf_replace_altfont(pfn, pc)
set_attr(p, attr_dir, pc)
- pc = ltjd_get_vert_glyph(pf, pc) or pc
+ pc = ltjf_get_vert_glyph(pf, pc) or pc
setfield(p, 'char', pc); set_attr(p, attr_orig_char, pc)
setfield(p, 'font', pf); set_attr(p, attr_curjfnt, pf)
end
do
local function write_aux(wv, num)
local id = has_attr(wv, attr_ruby_id)
- if id>0 then
+ if false and id>0 then
tex.sprint(cat_lp,
'\\write\\@mainaux{\\string\\directlua{luatexja.ruby.old_break_info['
.. tostring(id) .. ']=' .. num
local attr_icflag = luatexbase.attributes['ltj@icflag']
local ltjf_font_metric_table = ltjf.font_metric_table
+local ltjf_get_vert_glyph = ltjf.get_vert_glyph
local PACKED = luatexja.icflag_table.PACKED
local PROCESSED = luatexja.icflag_table.PROCESSED
fshift = call_callback("luatexja.set_width", fshift, met, class)
local fheight, fdepth = char_data.height, char_data.depth
- setfield(p, 'char', ltjd.get_vert_glyph(getfont(p), getchar(p)))
+ setfield(p, 'char', ltjf_get_vert_glyph(getfont(p), getchar(p)))
local y_shift
= - getfield(p, 'yoffset') + (has_attr(p,attr_tkblshift) or 0)
if luatexja_debug then load_module('debug') end
load_module('charrange'); local ltjc = luatexja.charrange
+load_module('stack'); local ltjs = luatexja.stack
+load_module('direction'); local ltjd = luatexja.direction
load_module('jfont'); local ltjf = luatexja.jfont
-
--- define_font
-do
- local otfl_fdr = fonts.definers.read
- local ltjr_font_callback = ltjr.font_callback
- local ltjf_extract_metric = ltjf.extract_metric
- function luatexja.font_callback(name, size, id)
- local new_name = ltjf_extract_metric(name)
- local res = ltjr_font_callback(new_name, size, id, otfl_fdr)
- luatexbase.call_callback('luatexja.define_font', res, new_name, size, id)
- return res
- end
- luatexbase.create_callback('luatexja.define_font', 'simple', function (n) return n end)
- luatexbase.add_to_callback('define_font',luatexja.font_callback,"luatexja.font_callback", 1)
-end
-
-
load_module('inputbuf'); local ltji = luatexja.inputbuf
-load_module('stack'); local ltjs = luatexja.stack
load_module('pretreat'); local ltjp = luatexja.pretreat
load_module('jfmglue'); local ltjj = luatexja.jfmglue
load_module('setwidth'); local ltjw = luatexja.setwidth
load_module('math'); local ltjm = luatexja.math
load_module('tangle'); local ltjb = luatexja.base
-load_module('direction'); local ltjd = luatexja.direction
local attr_jchar_class = luatexbase.attributes['ltj@charclass']
local attr_curjfnt = luatexbase.attributes['ltj@curjfnt']