// an eof buf. syncWork returns done when all
// bits are clear.
/* Video */
- hb_subtitle_t * subtitle;
int64_t pts_offset;
int64_t next_start; /* start time of next output frame */
int64_t next_pts; /* start time of next input frame */
/* Audio */
hb_sync_audio_t sync_audio[8];
int64_t audio_passthru_slip;
+ int64_t video_pts_slip;
/* Statistics */
uint64_t st_counts[4];
pv->job = job;
pv->pts_offset = INT64_MIN;
- /* Calculate how many video frames we are expecting */
- if (job->pts_to_stop)
+ if( job->pass == 2 )
{
- duration = job->pts_to_stop + 90000;
- }
- else if( job->frame_to_stop )
- {
- /* Set the duration to a rough estimate */
- duration = ( job->frame_to_stop / ( job->vrate / job->vrate_base ) ) * 90000;
+ /* We already have an accurate frame count from pass 1 */
+ hb_interjob_t * interjob = hb_interjob_get( job->h );
+ pv->count_frames_max = interjob->frame_count;
}
else
{
- duration = 0;
- for( i = job->chapter_start; i <= job->chapter_end; i++ )
+ /* Calculate how many video frames we are expecting */
+ if ( job->pts_to_stop )
{
- chapter = hb_list_item( title->list_chapter, i - 1 );
- duration += chapter->duration;
+ duration = job->pts_to_stop + 90000;
+ }
+ else if( job->frame_to_stop )
+ {
+ /* Set the duration to a rough estimate */
+ duration = ( job->frame_to_stop / ( title->rate / title->rate_base ) ) * 90000;
+ }
+ else
+ {
+ duration = 0;
+ for( i = job->chapter_start; i <= job->chapter_end; i++ )
+ {
+ chapter = hb_list_item( title->list_chapter, i - 1 );
+ duration += chapter->duration;
+ }
+ duration += 90000;
+ /* 1 second safety so we're sure we won't miss anything */
}
- duration += 90000;
- /* 1 second safety so we're sure we won't miss anything */
+ pv->count_frames_max = duration * title->rate / title->rate_base / 90000;
}
- pv->count_frames_max = duration * job->vrate / job->vrate_base / 90000;
hb_log( "sync: expecting %d video frames", pv->count_frames_max );
pv->busy |= 1;
/* Initialize libsamplerate for every audio track we have */
if ( ! job->indepth_scan )
{
- for( i = 0; i < hb_list_count( title->list_audio ); i++ )
+ for( i = 0; i < hb_list_count( title->list_audio ) && i < 8; i++ )
{
pv->busy |= ( 1 << (i + 1) );
InitAudio( w, i );
}
}
- /* Get subtitle info, if any */
- pv->subtitle = hb_list_item( title->list_subtitle, 0 );
-
return 0;
}
hb_log( "sync: got %d frames, %d expected",
pv->count_frames, pv->count_frames_max );
+ /* save data for second pass */
+ if( job->pass == 1 )
+ {
+ /* Preserve frame count for better accuracy in pass 2 */
+ hb_interjob_t * interjob = hb_interjob_get( job->h );
+ interjob->frame_count = pv->count_frames;
+ interjob->last_job = job->sequence_id;
+ interjob->total_time = pv->next_start;
+ }
+
if (pv->drops || pv->dups )
{
hb_log( "sync: %d frames dropped, %d duplicated", pv->drops, pv->dups );
hb_work_private_t * pv = w->private_data;
hb_buffer_t * cur, * next, * sub = NULL;
hb_job_t * job = pv->job;
+ hb_subtitle_t *subtitle;
+ int i;
+ int64_t pts_skip;
if( !pv->cur && !( pv->cur = hb_fifo_get( job->fifo_raw ) ) )
{
return;
}
cur = pv->cur;
+ pts_skip = 0;
if( cur->size == 0 )
{
/* we got an end-of-stream. Feed it downstream & signal that we're done. */
hb_fifo_push( job->fifo_sync, hb_buffer_init( 0 ) );
+
+ /*
+ * Push through any subtitle EOFs in case they were not synced through.
+ */
+ for( i = 0; i < hb_list_count( job->list_subtitle ); i++)
+ {
+ subtitle = hb_list_item( job->list_subtitle, i );
+ if( subtitle->config.dest == PASSTHRUSUB )
+ {
+ hb_fifo_push( subtitle->fifo_out, hb_buffer_init( 0 ) );
+ }
+ }
+
pv->busy &=~ 1;
return;
}
* video (we don't know its duration). On DVDs the final frame
* is often strange and dropping it seems to be a good idea. */
hb_fifo_push( job->fifo_sync, hb_buffer_init( 0 ) );
+
+ /*
+ * Push through any subtitle EOFs in case they were not synced through.
+ */
+ for( i = 0; i < hb_list_count( job->list_subtitle ); i++)
+ {
+ subtitle = hb_list_item( job->list_subtitle, i );
+ if( subtitle->config.dest == PASSTHRUSUB )
+ {
+ hb_fifo_push( subtitle->fifo_out, hb_buffer_init( 0 ) );
+ }
+ }
pv->busy &=~ 1;
return;
}
* as if it started at zero so that our audio timing will
* be in sync.
*/
- hb_log( "sync: first pts is %lld", cur->start );
+ hb_log( "sync: first pts is %"PRId64, cur->start );
cur->start = 0;
}
}
- if( cur->new_chap ) {
- hb_log("sync got new chapter %d", cur->new_chap );
- }
-
/*
* since the first frame is always 0 and the upstream reader code
* is taking care of adjusting for pts discontinuities, we just have
* can deal with overlaps of up to a frame time but anything larger
* we handle by dropping frames here.
*/
- if ( (int64_t)( next->start - cur->start ) <= 0 ||
- (int64_t)( (cur->start - pv->audio_passthru_slip ) - pv->next_pts ) < 0 )
+ if ( (int64_t)( next->start - pv->video_pts_slip - cur->start ) <= 0 )
{
if ( pv->first_drop == 0 )
{
pv->first_drop = next->start;
}
++pv->drop_count;
+ if (next->start - cur->start > 0)
+ {
+ pts_skip += next->start - cur->start;
+ pv->video_pts_slip -= next->start - cur->start;
+ }
buf_tmp = hb_fifo_get( job->fifo_raw );
if ( buf_tmp->new_chap )
{
if ( pv->first_drop )
{
hb_log( "sync: video time didn't advance - dropped %d frames "
- "(delta %d ms, current %lld, next %lld, dur %d)",
+ "(delta %d ms, current %"PRId64", next %"PRId64", dur %d)",
pv->drop_count, (int)( cur->start - pv->first_drop ) / 90,
cur->start, next->start, (int)( next->start - cur->start ) );
pv->first_drop = 0;
*/
pv->video_sequence = cur->sequence;
- /* Look for a subtitle for this frame */
- if( pv->subtitle )
+ /*
+ * Look for a subtitle for this frame.
+ *
+ * If found then it will be tagged onto a video buffer of the correct time and
+ * sent in to the render pipeline. This only needs to be done for VOBSUBs which
+ * get rendered, other types of subtitles can just sit in their raw_queue until
+ * delt with at muxing.
+ */
+ for( i = 0; i < hb_list_count( job->list_subtitle ); i++)
{
- hb_buffer_t * sub2;
- while( ( sub = hb_fifo_see( pv->subtitle->fifo_raw ) ) )
- {
- /* If two subtitles overlap, make the first one stop
- when the second one starts */
- sub2 = hb_fifo_see2( pv->subtitle->fifo_raw );
- if( sub2 && sub->stop > sub2->start )
- sub->stop = sub2->start;
-
- // hb_log("0x%x: video seq: %lld subtitle sequence: %lld",
- // sub, cur->sequence, sub->sequence);
-
- if( sub->sequence > cur->sequence )
- {
- /*
- * The video is behind where we are, so wait until
- * it catches up to the same reader point on the
- * DVD. Then our PTS should be in the same region
- * as the video.
- */
- sub = NULL;
- break;
- }
-
- if( sub->stop > cur->start ) {
- /*
- * The stop time is in the future, so fall through
- * and we'll deal with it in the next block of
- * code.
- */
- break;
- }
-
- /*
- * The subtitle is older than this picture, trash it
- */
- sub = hb_fifo_get( pv->subtitle->fifo_raw );
- hb_buffer_close( &sub );
- }
+ subtitle = hb_list_item( job->list_subtitle, i );
/*
- * There is a valid subtitle, is it time to display it?
+ * Rewrite timestamps on subtitles that need it (on raw queue).
*/
- if( sub )
+ if( subtitle->source == CC608SUB ||
+ subtitle->source == CC708SUB ||
+ subtitle->source == SRTSUB )
{
- if( sub->stop > sub->start)
+ /*
+ * Rewrite timestamps on subtitles that came from Closed Captions
+ * since they are using the MPEG2 timestamps.
+ */
+ while( ( sub = hb_fifo_see( subtitle->fifo_raw ) ) )
{
/*
- * Normal subtitle which ends after it starts, check to
- * see that the current video is between the start and end.
+ * Rewrite the timestamps as and when the video
+ * (cur->start) reaches the same timestamp as a
+ * closed caption (sub->start).
+ *
+ * What about discontinuity boundaries - not delt
+ * with here - Van?
+ *
+ * Bypass the sync fifo altogether.
*/
- if( cur->start > sub->start &&
- cur->start < sub->stop )
+ if( sub->size <= 0 )
{
+ sub = hb_fifo_get( subtitle->fifo_raw );
+ hb_fifo_push( subtitle->fifo_out, sub );
+ sub = NULL;
+ break;
+ } else {
/*
- * We should be playing this, so leave the
- * subtitle in place.
+ * Sync the subtitles to the incoming video, and use
+ * the matching converted video timestamp.
+ *
+ * Note that it doesn't appear that we need to convert
+ * timestamps, I guess that they were already correct,
+ * so just push them through for rendering.
*
- * fall through to display
*/
- if( ( sub->stop - sub->start ) < ( 3 * 90000 ) )
+ if( sub->start < cur->start )
{
- /*
- * Subtitle is on for less than three seconds, extend
- * the time that it is displayed to make it easier
- * to read. Make it 3 seconds or until the next
- * subtitle is displayed.
- *
- * This is in response to Indochine which only
- * displays subs for 1 second - too fast to read.
- */
- sub->stop = sub->start + ( 3 * 90000 );
+ uint64_t duration;
+ duration = sub->stop - sub->start;
+ sub = hb_fifo_get( subtitle->fifo_raw );
+ hb_fifo_push( subtitle->fifo_out, sub );
+ } else {
+ sub = NULL;
+ break;
+ }
+ }
+ }
+ }
- sub2 = hb_fifo_see2( pv->subtitle->fifo_raw );
+ if( subtitle->source == VOBSUB )
+ {
+ hb_buffer_t * sub2;
+ while( ( sub = hb_fifo_see( subtitle->fifo_raw ) ) )
+ {
+ if( sub->size == 0 )
+ {
+ /*
+ * EOF, pass it through immediately.
+ */
+ break;
+ }
- if( sub2 && sub->stop > sub2->start )
- {
- sub->stop = sub2->start;
- }
- }
+ /* If two subtitles overlap, make the first one stop
+ when the second one starts */
+ sub2 = hb_fifo_see2( subtitle->fifo_raw );
+ if( sub2 && sub->stop > sub2->start )
+ {
+ sub->stop = sub2->start;
}
- else
+
+ // hb_log("0x%x: video seq: %lld subtitle sequence: %lld",
+ // sub, cur->sequence, sub->sequence);
+
+ if( sub->sequence > cur->sequence )
{
/*
- * Defer until the play point is within the subtitle
+ * The video is behind where we are, so wait until
+ * it catches up to the same reader point on the
+ * DVD. Then our PTS should be in the same region
+ * as the video.
*/
sub = NULL;
+ break;
}
- }
- else
- {
- /*
- * The end of the subtitle is less than the start, this is a
- * sign of a PTS discontinuity.
- */
- if( sub->start > cur->start )
- {
+
+ if( sub->stop > cur->start ) {
/*
- * we haven't reached the start time yet, or
- * we have jumped backwards after having
- * already started this subtitle.
+ * The stop time is in the future, so fall through
+ * and we'll deal with it in the next block of
+ * code.
*/
- if( cur->start < sub->stop )
+
+ /*
+ * There is a valid subtitle, is it time to display it?
+ */
+ if( sub->stop > sub->start)
{
/*
- * We have jumped backwards and so should
- * continue displaying this subtitle.
- *
- * fall through to display.
+ * Normal subtitle which ends after it starts,
+ * check to see that the current video is between
+ * the start and end.
*/
+ if( cur->start > sub->start &&
+ cur->start < sub->stop )
+ {
+ /*
+ * We should be playing this, so leave the
+ * subtitle in place.
+ *
+ * fall through to display
+ */
+ if( ( sub->stop - sub->start ) < ( 2 * 90000 ) )
+ {
+ /*
+ * Subtitle is on for less than three
+ * seconds, extend the time that it is
+ * displayed to make it easier to read.
+ * Make it 3 seconds or until the next
+ * subtitle is displayed.
+ *
+ * This is in response to Indochine which
+ * only displays subs for 1 second -
+ * too fast to read.
+ */
+ sub->stop = sub->start + ( 2 * 90000 );
+
+ sub2 = hb_fifo_see2( subtitle->fifo_raw );
+
+ if( sub2 && sub->stop > sub2->start )
+ {
+ sub->stop = sub2->start;
+ }
+ }
+ }
+ else
+ {
+ /*
+ * Defer until the play point is within
+ * the subtitle
+ */
+ sub = NULL;
+ }
}
else
{
/*
- * Defer until the play point is within the subtitle
+ * The end of the subtitle is less than the start,
+ * this is a sign of a PTS discontinuity.
*/
- sub = NULL;
+ if( sub->start > cur->start )
+ {
+ /*
+ * we haven't reached the start time yet, or
+ * we have jumped backwards after having
+ * already started this subtitle.
+ */
+ if( cur->start < sub->stop )
+ {
+ /*
+ * We have jumped backwards and so should
+ * continue displaying this subtitle.
+ *
+ * fall through to display.
+ */
+ }
+ else
+ {
+ /*
+ * Defer until the play point is
+ * within the subtitle
+ */
+ sub = NULL;
+ }
+ } else {
+ /*
+ * Play this subtitle as the start is
+ * greater than our video point.
+ *
+ * fall through to display/
+ */
+ }
}
- } else {
+ break;
+ }
+ else
+ {
+
/*
- * Play this subtitle as the start is greater than our
- * video point.
- *
- * fall through to display/
+ * The subtitle is older than this picture, trash it
*/
+ sub = hb_fifo_get( subtitle->fifo_raw );
+ hb_buffer_close( &sub );
}
}
- }
- }
-
- int64_t duration;
- if ( job->mux & HB_MUX_AVI || job->cfr )
- {
- /*
- * The concept of variable frame rate video was a bit too advanced
- * for Microsoft so AVI doesn't support it. Since almost all dvd
- * video is VFR we have to convert it to constant frame rate to
- * put it in an AVI container. So here we duplicate, drop and
- * otherwise trash video frames to appease the gods of Redmond.
- */
-
- /* mpeg durations are exact when expressed in ticks of the
- * 27MHz System clock but not in HB's 90KHz PTS clock. To avoid
- * a truncation bias that will eventually cause the audio to desync
- * we compute the duration of the next frame using 27MHz ticks
- * then truncate it to 90KHz. */
- duration = ( (int64_t)(pv->count_frames + 1 ) * job->vrate_base ) / 300 -
- pv->next_start;
-
- /* We don't want the input & output clocks to be exactly in phase
- * otherwise small variations in the time will cause us to think
- * we're a full frame off & there will be lots of drops and dups.
- * We offset the input clock by half the duration so it's maximally
- * out of phase with the output clock. */
- if( cur->start < pv->next_start - ( duration >> 1 ) )
- {
- /* current frame too old - drop it */
- if ( cur->new_chap )
+
+ /* If we have a subtitle for this picture, copy it */
+ /* FIXME: we should avoid this memcpy */
+ if( sub )
{
- pv->chap_mark = cur->new_chap;
+ if( sub->size > 0 )
+ {
+ if( subtitle->config.dest == RENDERSUB )
+ {
+ if ( cur->sub == NULL )
+ {
+ /*
+ * Tack onto the video buffer for rendering
+ */
+ cur->sub = hb_buffer_init( sub->size );
+ cur->sub->x = sub->x;
+ cur->sub->y = sub->y;
+ cur->sub->width = sub->width;
+ cur->sub->height = sub->height;
+ memcpy( cur->sub->data, sub->data, sub->size );
+ }
+ } else {
+ /*
+ * Pass-Through, pop it off of the raw queue,
+ * rewrite times and make it available to be
+ * reencoded.
+ */
+ uint64_t sub_duration;
+ sub = hb_fifo_get( subtitle->fifo_raw );
+ sub_duration = sub->stop - sub->start;
+ sub->start = cur->start;
+ buf_tmp = hb_fifo_see( job->fifo_raw );
+ int64_t duration = buf_tmp->start - cur->start;
+ sub->stop = sub->start + duration;
+ hb_fifo_push( subtitle->fifo_sync, sub );
+ }
+ } else {
+ /*
+ * EOF - consume for rendered, else pass through
+ */
+ if( subtitle->config.dest == RENDERSUB )
+ {
+ sub = hb_fifo_get( subtitle->fifo_raw );
+ hb_buffer_close( &sub );
+ } else {
+ sub = hb_fifo_get( subtitle->fifo_raw );
+ hb_fifo_push( subtitle->fifo_out, sub );
+ }
+ }
}
- hb_buffer_close( &cur );
- pv->cur = cur = hb_fifo_get( job->fifo_raw );
- pv->next_pts = next->start;
- ++pv->drops;
- continue;
}
+ } // end subtitles
- if( next->start > pv->next_start + duration + ( duration >> 1 ) )
- {
- /* next frame too far ahead - dup current frame */
- buf_tmp = hb_buffer_init( cur->size );
- hb_buffer_copy_settings( buf_tmp, cur );
- memcpy( buf_tmp->data, cur->data, cur->size );
- buf_tmp->sequence = cur->sequence;
- ++pv->dups;
- }
- else
- {
- /* this frame in our time window & doesn't need to be duped */
- buf_tmp = cur;
- pv->cur = cur = hb_fifo_get( job->fifo_raw );
- pv->next_pts = next->start;
- }
- }
- else
+ /*
+ * Adjust the pts of the current frame so that it's contiguous
+ * with the previous frame. The start time of the current frame
+ * has to be the end time of the previous frame and the stop
+ * time has to be the start of the next frame. We don't
+ * make any adjustments to the source timestamps other than removing
+ * the clock offsets (which also removes pts discontinuities).
+ * This means we automatically encode at the source's frame rate.
+ * MP2 uses an implicit duration (frames end when the next frame
+ * starts) but more advanced containers like MP4 use an explicit
+ * duration. Since we're looking ahead one frame we set the
+ * explicit stop time from the start time of the next frame.
+ */
+ buf_tmp = cur;
+ pv->cur = cur = hb_fifo_get( job->fifo_raw );
+ cur->sub = NULL;
+ pv->next_pts = cur->start;
+ int64_t duration = cur->start - pts_skip - buf_tmp->start;
+ pts_skip = 0;
+ if ( duration <= 0 )
{
- /*
- * Adjust the pts of the current frame so that it's contiguous
- * with the previous frame. The start time of the current frame
- * has to be the end time of the previous frame and the stop
- * time has to be the start of the next frame. We don't
- * make any adjustments to the source timestamps other than removing
- * the clock offsets (which also removes pts discontinuities).
- * This means we automatically encode at the source's frame rate.
- * MP2 uses an implicit duration (frames end when the next frame
- * starts) but more advanced containers like MP4 use an explicit
- * duration. Since we're looking ahead one frame we set the
- * explicit stop time from the start time of the next frame.
- */
- buf_tmp = cur;
- pv->cur = cur = hb_fifo_get( job->fifo_raw );
- pv->next_pts = cur->start;
- duration = cur->start - buf_tmp->start;
- if ( duration <= 0 )
- {
- hb_log( "sync: invalid video duration %lld, start %lld, next %lld",
- duration, buf_tmp->start, next->start );
- }
+ hb_log( "sync: invalid video duration %"PRId64", start %"PRId64", next %"PRId64"",
+ duration, buf_tmp->start, next->start );
}
buf_tmp->start = pv->next_start;
pv->chap_mark = 0;
}
- /* If we have a subtitle for this picture, copy it */
- /* FIXME: we should avoid this memcpy */
- if( sub )
- {
- buf_tmp->sub = hb_buffer_init( sub->size );
- buf_tmp->sub->x = sub->x;
- buf_tmp->sub->y = sub->y;
- buf_tmp->sub->width = sub->width;
- buf_tmp->sub->height = sub->height;
- memcpy( buf_tmp->sub->data, sub->data, sub->size );
- }
-
/* Push the frame to the renderer */
hb_fifo_push( job->fifo_sync, buf_tmp );
pv->count_frames, pv->busy );
return;
}
-
- /* Make sure we won't get more frames then expected */
- if( pv->count_frames >= pv->count_frames_max * 2)
- {
- hb_log( "sync: got too many frames (%d), exiting early",
- pv->count_frames );
-
- // Drop an empty buffer into our output to ensure that things
- // get flushed all the way out.
- hb_fifo_push( job->fifo_sync, hb_buffer_init( 0 ) );
- pv->busy &=~ 1;
- return;
- }
}
}
{
// we were dropping old data but input buf time is now current
hb_log( "sync: audio %d time went backwards %d ms, dropped %d frames "
- "(next %lld, current %lld)", i,
+ "(next %"PRId64", current %"PRId64")", i,
(int)( sync->next_pts - sync->first_drop ) / 90,
sync->drop_count, sync->first_drop, sync->next_pts );
sync->first_drop = 0;
// frame and this. assume we got a corrupted timestamp
// and just drop the next buf.
hb_log( "sync: %d minute time gap in audio %d - dropping buf"
- " start %lld, next %lld",
+ " start %"PRId64", next %"PRId64,
(int)((start - sync->next_pts) / (90000*60)),
i, start, sync->next_pts );
buf = hb_fifo_get( audio->priv.fifo_raw );
if( sync->audio->config.out.codec == HB_ACODEC_DCA )
{
hb_log( "sync: audio gap %d ms. Skipping frames. Audio %d"
- " start %lld, next %lld",
+ " start %"PRId64", next %"PRId64,
(int)((start - sync->next_pts) / 90),
i, start, sync->next_pts );
pv->audio_passthru_slip += (start - sync->next_pts);
+ pv->video_pts_slip += (start - sync->next_pts);
return;
}
hb_log( "sync: adding %d ms of silence to audio %d"
- " start %lld, next %lld",
+ " start %"PRId64", next %"PRId64,
(int)((start - sync->next_pts) / 90),
i, start, sync->next_pts );
InsertSilence( w, i, start - sync->next_pts );
OSDN Git Service
