} hb_stream_type_t;
#define kMaxNumberVideoPIDS 1
-#define kMaxNumberAudioPIDS 15
+#define kMaxNumberAudioPIDS 31
#define kMaxNumberDecodeStreams (kMaxNumberVideoPIDS+kMaxNumberAudioPIDS)
#define kMaxNumberPMTStreams 32
int ts_pos[kMaxNumberDecodeStreams];
int8_t ts_skipbad[kMaxNumberDecodeStreams];
int8_t ts_streamcont[kMaxNumberDecodeStreams];
+ uint8_t ts_pkt_summary[kMaxNumberDecodeStreams][8];
hb_buffer_t *fwrite_buf; /* PS buffer (set by hb_ts_stream_decode) */
// 'Barebones Title'
hb_title_t *aTitle = hb_title_init( stream->path, 0 );
+ aTitle->type = HB_STREAM_TYPE;
aTitle->index = 1;
// Copy part of the stream path to the title name
switch (dp[0])
{
case 5: // Registration descriptor
- stream->ts_format_id[esindx] = (dp[2] << 24) | (dp[3] << 16) |
+ stream->ts_format_id[esindx+1] = (dp[2] << 24) | (dp[3] << 16) |
(dp[4] << 8) | dp[5];
break;
stream->a52_info[esindx].lang_code = lang_to_code(lang_for_code2((const char *)&dp[2]));
break;
+ case 0x6a: // DVB AC-3 descriptor
+ stream->ts_stream_type[esindx+1] = 0x81;
+ break;
+
default:
break;
}
if ( index_of_pid( elementary_PID, stream ) < 0 )
{
- // already have this pid - do nothing
- }
- if (stream->ts_number_video_pids == 0 && st2codec[stream_type].kind == V )
- {
- stream->ts_video_pids[0] = elementary_PID;
- stream->ts_stream_type[0] = stream_type;
- stream->ts_number_video_pids = 1;
- }
- else
- {
- // Defined audio stream types are 0x81 for AC-3/A52 audio and 0x03
- // for mpeg audio. But content producers seem to use other
- // values (0x04 and 0x06 have both been observed) so at this point
- // we say everything that isn't a video pid is audio then at the end
- // of hb_stream_title_scan we'll figure out which are really audio
- // by looking at the PES headers.
- i = stream->ts_number_audio_pids;
- if (i < kMaxNumberAudioPIDS)
+ // don't have this pid yet
+ if (stream->ts_number_video_pids == 0 &&
+ st2codec[stream_type].kind == V )
+ {
+ stream->ts_video_pids[0] = elementary_PID;
+ stream->ts_stream_type[0] = stream_type;
+ stream->ts_number_video_pids = 1;
+ }
+ else
{
- stream->ts_audio_pids[i] = elementary_PID;
- stream->ts_stream_type[1 + i] = stream_type;
- if (ES_info_length > 0)
+ // Defined audio stream types are 0x81 for AC-3/A52 audio
+ // and 0x03 for mpeg audio. But content producers seem to
+ // use other values (0x04 and 0x06 have both been observed)
+ // so at this point we say everything that isn't a video
+ // pid is audio then at the end of hb_stream_title_scan
+ // we'll figure out which are really audio by looking at
+ // the PES headers.
+ i = stream->ts_number_audio_pids;
+ if (i < kMaxNumberAudioPIDS)
{
- decode_element_descriptors(stream, i, ES_info_buf,
- ES_info_length);
+ stream->ts_audio_pids[i] = elementary_PID;
+ stream->ts_stream_type[1 + i] = stream_type;
+ if (ES_info_length > 0)
+ {
+ decode_element_descriptors(stream, i, ES_info_buf,
+ ES_info_length);
+ }
+ ++stream->ts_number_audio_pids;
}
- ++stream->ts_number_audio_pids;
}
}
free(ES_info_buf);
if (cur_pos >= section_length - 4 /* stop before the CRC */)
- done_reading_stream_types = 1;
+ done_reading_stream_types = 1;
}
free(descriptor_buf);
}
}
// Keep going until we have a complete set of PIDs
- if ((stream->ts_number_video_pids > 0) && (stream->ts_number_audio_pids > 0))
+ if (stream->ts_number_video_pids > 0)
break;
}
int continuity = (buf[3] & 0xF);
if ( continuity == stream->ts_streamcont[curstream] )
{
- // we got a duplicate packet (usually used to introduce
- // a PCR when one is needed). The only thing that can
- // change in the dup is the PCR which we grabbed above
- // so ignore the rest.
- continue;
+ // Spliced transport streams can have duplicate
+ // continuity counts at the splice boundary.
+ // Test to see if the packet is really a duplicate
+ // by comparing packet summaries to see if they
+ // match.
+ uint8_t summary[8];
+
+ summary[0] = adaption;
+ summary[1] = adapt_len;
+ if (adapt_len + 4 + 6 + 9 <= 188)
+ {
+ memcpy(&summary[2], buf+4+adapt_len+9, 6);
+ }
+ else
+ {
+ memset(&summary[2], 0, 6);
+ }
+ if ( memcmp( summary, stream->ts_pkt_summary[curstream], 8 ) == 0 )
+ {
+ // we got a duplicate packet (usually used to introduce
+ // a PCR when one is needed). The only thing that can
+ // change in the dup is the PCR which we grabbed above
+ // so ignore the rest.
+ continue;
+ }
}
if ( !start && (stream->ts_streamcont[curstream] != -1) &&
!stream->ts_skipbad[curstream] &&
(int)continuity,
(stream->ts_streamcont[curstream] + 1) & 0xf );
stream->ts_streamcont[curstream] = continuity;
- continue;
- }
- stream->ts_streamcont[curstream] = continuity;
- }
+ continue;
+ }
+ stream->ts_streamcont[curstream] = continuity;
+
+ // Save a summary of this packet for later duplicate
+ // testing. The summary includes some header information
+ // and payload bytes. Should be enough to detect
+ // non-duplicates.
+ stream->ts_pkt_summary[curstream][0] = adaption;
+ stream->ts_pkt_summary[curstream][1] = adapt_len;
+ if (adapt_len + 4 + 6 + 9 <= 188)
+ {
+ memcpy(&stream->ts_pkt_summary[curstream][2],
+ buf+4+adapt_len+9, 6);
+ }
+ else
+ {
+ memset(&stream->ts_pkt_summary[curstream][2], 0, 6);
+ }
+ }
/* If we get here the packet is valid - process its data */
// 'Barebones Title'
hb_title_t *title = hb_title_init( stream->path, 0 );
+ title->type = HB_STREAM_TYPE;
title->index = 1;
// Copy part of the stream path to the title name
// we do it ourselves here. The decoder gets messed up if it
// doesn't get a SEQ header first so we consider that to be a key frame.
pkt = stream->ffmpeg_pkt->data;
- if ( pkt[0] && pkt[1] && pkt[2] == 1 && pkt[3] == 0x0f )
+ if ( !pkt[0] && !pkt[1] && pkt[2] == 1 && pkt[3] == 0x0f )
return 1;
return 0;
{
buf->start = buf->renderOffset;
}
+ else if ( buf->renderOffset == -1 && buf->start >= 0 )
+ {
+ buf->renderOffset = buf->start;
+ }
/*
* Check to see whether this video buffer is on a chapter
if ( buf->id == stream->ffmpeg_video_id && buf->start >= stream->chapter_end )
{
hb_chapter_t *chapter = hb_list_item( stream->title->list_chapter,
- ++stream->chapter );
+ stream->chapter+1 );
if( chapter )
{
+ stream->chapter++;
stream->chapter_end += chapter->duration;
buf->new_chap = stream->chapter + 1;
hb_deep_log( 2, "ffmpeg_read starting chapter %i at %"PRId64,
OSDN Git Service
