OSDN Git Service

Removed double EOF for CC's (one from dvd and one from cc), fixed compiler warnings...
[handbrake-jp/handbrake-jp-git.git] / libhb / reader.c
index 47ec9d5..dd47815 100644 (file)
@@ -1,27 +1,43 @@
 /* $Id: reader.c,v 1.21 2005/11/25 15:05:25 titer Exp $
 
    This file is part of the HandBrake source code.
-   Homepage: <http://handbrake.m0k.org/>.
+   Homepage: <http://handbrake.fr/>.
    It may be used under the terms of the GNU General Public License. */
 
 #include "hb.h"
 
 typedef struct
 {
+    double average; // average time between packets
+    int64_t last;   // last timestamp seen on this stream
+    int id;         // stream id
+    int is_audio;   // != 0 if this is an audio stream
+} stream_timing_t;
+
+typedef struct
+{
     hb_job_t     * job;
     hb_title_t   * title;
     volatile int * die;
 
     hb_dvd_t     * dvd;
-    hb_buffer_t  * ps;
+    hb_stream_t  * stream;
 
+    stream_timing_t *stream_timing;
+    int64_t        scr_offset;
+    hb_psdemux_t   demux;
+    int            scr_changes;
+    uint32_t       sequence;
+    uint8_t        st_slots;        // size (in slots) of stream_timing array
+    uint8_t        saw_video;       // != 0 if we've seen video
+    uint8_t        saw_audio;       // != 0 if we've seen audio
 } hb_reader_t;
 
 /***********************************************************************
  * Local prototypes
  **********************************************************************/
 static void        ReaderFunc( void * );
-static hb_fifo_t * GetFifoForId( hb_job_t * job, int id );
+static hb_fifo_t ** GetFifoForId( hb_job_t * job, int id );
 
 /***********************************************************************
  * hb_reader_init
@@ -37,11 +53,129 @@ hb_thread_t * hb_reader_init( hb_job_t * job )
     r->job   = job;
     r->title = job->title;
     r->die   = job->die;
-    
+    r->sequence = 0;
+
+    r->st_slots = 4;
+    r->stream_timing = calloc( sizeof(stream_timing_t), r->st_slots );
+    r->stream_timing[0].id = r->title->video_id;
+    r->stream_timing[0].average = 90000. * (double)job->vrate_base /
+                                           (double)job->vrate;
+    r->stream_timing[0].last = -r->stream_timing[0].average;
+    r->stream_timing[1].id = -1;
+
     return hb_thread_init( "reader", ReaderFunc, r,
                            HB_NORMAL_PRIORITY );
 }
 
+static void push_buf( const hb_reader_t *r, hb_fifo_t *fifo, hb_buffer_t *buf )
+{
+    while( !*r->die && !r->job->done && hb_fifo_is_full( fifo ) )
+    {
+        /*
+         * Loop until the incoming fifo is ready to receive
+         * this buffer.
+         */
+        hb_snooze( 50 );
+    }
+    hb_fifo_push( fifo, buf );
+}
+
+static int is_audio( hb_reader_t *r, int id )
+{
+    int i;
+    hb_audio_t *audio;
+
+    for( i = 0; ( audio = hb_list_item( r->title->list_audio, i ) ); ++i )
+    {
+        if ( audio->id == id )
+        {
+            return 1;
+        }
+    }
+    return 0;
+}
+
+// The MPEG STD (Standard Target Decoder) essentially requires that we keep
+// per-stream timing so that when there's a timing discontinuity we can
+// seemlessly join packets on either side of the discontinuity. This join
+// requires that we know the timestamp of the previous packet and the
+// average inter-packet time (since we position the new packet at the end
+// of the previous packet). The next four routines keep track of this
+// per-stream timing.
+
+// find the per-stream timing state for 'buf'
+
+static stream_timing_t *find_st( hb_reader_t *r, const hb_buffer_t *buf )
+{
+    stream_timing_t *st = r->stream_timing;
+    for ( ; st->id != -1; ++st )
+    {
+        if ( st->id == buf->id )
+            return st;
+    }
+    return NULL;
+}
+
+// find or create the per-stream timing state for 'buf'
+
+static stream_timing_t *id_to_st( hb_reader_t *r, const hb_buffer_t *buf )
+{
+    stream_timing_t *st = r->stream_timing;
+    while ( st->id != buf->id && st->id != -1)
+    {
+        ++st;
+    }
+    // if we haven't seen this stream add it.
+    if ( st->id == -1 )
+    {
+        // we keep the steam timing info in an array with some power-of-two
+        // number of slots. If we don't have two slots left (one for our new
+        // entry plus one for the "-1" eol) we need to expand the array.
+        int slot = st - r->stream_timing;
+        if ( slot + 1 >= r->st_slots )
+        {
+            r->st_slots *= 2;
+            r->stream_timing = realloc( r->stream_timing, r->st_slots *
+                                        sizeof(*r->stream_timing) );
+            st = r->stream_timing + slot;
+        }
+        st->id = buf->id;
+        st->average = 30.*90.;
+        st->last = buf->renderOffset - st->average;
+        if ( ( st->is_audio = is_audio( r, buf->id ) ) != 0 )
+        {
+            r->saw_audio = 1;
+        }
+        st[1].id = -1;
+    }
+    return st;
+}
+
+// update the average inter-packet time of the stream associated with 'buf'
+// using a recursive low-pass filter with a 16 packet time constant.
+
+static void update_ipt( hb_reader_t *r, const hb_buffer_t *buf )
+{
+    stream_timing_t *st = id_to_st( r, buf );
+    double dt = buf->renderOffset - st->last;
+    st->average += ( dt - st->average ) * (1./32.);
+    st->last = buf->renderOffset;
+}
+
+// use the per-stream state associated with 'buf' to compute a new scr_offset
+// such that 'buf' will follow the previous packet of this stream separated
+// by the average packet time of the stream.
+
+static void new_scr_offset( hb_reader_t *r, hb_buffer_t *buf )
+{
+    stream_timing_t *st = id_to_st( r, buf );
+    int64_t nxt = st->last + st->average;
+    r->scr_offset = buf->renderOffset - nxt;
+    buf->renderOffset = nxt;
+    r->scr_changes = r->demux.scr_changes;
+    st->last = buf->renderOffset;
+}
+
 /***********************************************************************
  * ReaderFunc
  ***********************************************************************
@@ -50,59 +184,260 @@ hb_thread_t * hb_reader_init( hb_job_t * job )
 static void ReaderFunc( void * _r )
 {
     hb_reader_t  * r = _r;
-    hb_fifo_t    * fifo;
+    hb_fifo_t   ** fifos;
     hb_buffer_t  * buf;
     hb_list_t    * list;
-    int            chapter;
+    int            n;
+    int            chapter = -1;
+    int            chapter_end = r->job->chapter_end;
 
     if( !( r->dvd = hb_dvd_init( r->title->dvd ) ) )
     {
-        return;
+        if ( !( r->stream = hb_stream_open( r->title->dvd, r->title ) ) )
+        {
+          return;
+        }
     }
 
-    if( !hb_dvd_start( r->dvd, r->title->index, r->job->chapter_start ) )
+    if (r->dvd)
     {
-        hb_dvd_close( &r->dvd );
-        return;
+        /*
+         * XXX this code is a temporary hack that should go away if/when
+         *     chapter merging goes away in libhb/dvd.c
+         * map the start and end chapter numbers to on-media chapter
+         * numbers since chapter merging could cause the handbrake numbers
+         * to diverge from the media numbers and, if our chapter_end is after
+         * a media chapter that got merged, we'll stop ripping too early.
+         */
+        int start = r->job->chapter_start;
+        hb_chapter_t *chap = hb_list_item( r->title->list_chapter, chapter_end - 1 );
+
+        chapter_end = chap->index;
+        if (start > 1)
+        {
+           chap = hb_list_item( r->title->list_chapter, start - 1 );
+           start = chap->index;
+        }
+        /* end chapter mapping XXX */
+
+        if( !hb_dvd_start( r->dvd, r->title, start ) )
+        {
+            hb_dvd_close( &r->dvd );
+            return;
+        }
+        if (r->job->angle)
+        {
+            hb_dvd_set_angle( r->dvd, r->job->angle );
+        }
+
+        if ( r->job->start_at_preview )
+        {
+            // XXX code from DecodePreviews - should go into its own routine
+            hb_dvd_seek( r->dvd, (float)r->job->start_at_preview /
+                         ( r->job->seek_points ? ( r->job->seek_points + 1.0 ) : 11.0 ) );
+        }
+    }
+    else if ( r->stream && r->job->start_at_preview )
+    {
+        
+        // XXX code from DecodePreviews - should go into its own routine
+        hb_stream_seek( r->stream, (float)( r->job->start_at_preview - 1 ) /
+                        ( r->job->seek_points ? ( r->job->seek_points + 1.0 ) : 11.0 ) );
+
+    } 
+    else if( r->stream )
+    {
+        /*
+         * Standard stream, seek to the starting chapter, if set, and track the
+         * end chapter so that we end at the right time.
+         */
+        int start = r->job->chapter_start;
+        hb_chapter_t *chap = hb_list_item( r->title->list_chapter, chapter_end - 1 );
+        
+        chapter_end = chap->index;
+        if (start > 1)
+        {
+            chap = hb_list_item( r->title->list_chapter, start - 1 );
+            start = chap->index;
+        }
+        
+        /*
+         * Seek to the start chapter.
+         */
+        hb_stream_seek_chapter( r->stream, start );
     }
 
     list  = hb_list_init();
-    r->ps = hb_buffer_init( 2048 );
+    hb_buffer_t *ps = hb_buffer_init( HB_DVD_READ_BUFFER_SIZE );
 
     while( !*r->die && !r->job->done )
     {
-        chapter = hb_dvd_chapter( r->dvd );
+        if (r->dvd)
+            chapter = hb_dvd_chapter( r->dvd );
+        else if (r->stream)
+            chapter = hb_stream_chapter( r->stream );
+
         if( chapter < 0 )
         {
             hb_log( "reader: end of the title reached" );
             break;
         }
-        if( chapter > r->job->chapter_end )
+        if( chapter > chapter_end )
         {
-            hb_log( "reader: end of chapter %d reached (%d)",
-                    r->job->chapter_end, chapter );
+            hb_log( "reader: end of chapter %d (media %d) reached at media chapter %d",
+                    r->job->chapter_end, chapter_end, chapter );
             break;
         }
 
-        if( !hb_dvd_read( r->dvd, r->ps ) )
+        if (r->dvd)
+        {
+          if( !hb_dvd_read( r->dvd, ps ) )
+          {
+              break;
+          }
+        }
+        else if (r->stream)
         {
+          if ( !hb_stream_read( r->stream, ps ) )
+          {
             break;
+          }
+        }
+
+        if( r->job->indepth_scan )
+        {
+            /*
+             * Need to update the progress during a subtitle scan
+             */
+            hb_state_t state;
+
+#define p state.param.working
+
+            state.state = HB_STATE_WORKING;
+            p.progress = (double)chapter / (double)r->job->chapter_end;
+            if( p.progress > 1.0 )
+            {
+                p.progress = 1.0;
+            }
+            p.rate_avg = 0.0;
+            p.hours    = -1;
+            p.minutes  = -1;
+            p.seconds  = -1;
+            hb_set_state( r->job->h, &state );
         }
 
-        hb_demux_ps( r->ps, list );
+        (hb_demux[r->title->demuxer])( ps, list, &r->demux );
 
         while( ( buf = hb_list_item( list, 0 ) ) )
         {
             hb_list_rem( list, buf );
-            fifo = GetFifoForId( r->job, buf->id );
-            if( fifo )
+            fifos = GetFifoForId( r->job, buf->id );
+
+            if ( ! r->saw_video )
             {
-                while( !*r->die && !r->job->done &&
-                       hb_fifo_is_full( fifo ) )
+                /* The first video packet defines 'time zero' so discard
+                   data until we get a video packet with a PTS & DTS */
+                if ( buf->id == r->title->video_id && buf->start != -1 &&
+                     buf->renderOffset != -1 )
                 {
-                    hb_snooze( 50 );
+                    // force a new scr offset computation
+                    r->scr_changes = r->demux.scr_changes - 1;
+                    r->saw_video = 1;
+                    hb_log( "reader: first SCR %lld", r->demux.last_scr );
+                }
+                else
+                {
+                    fifos = NULL;
                 }
-                hb_fifo_push( fifo, buf );
+            }
+            if( fifos )
+            {
+                if ( buf->renderOffset != -1 )
+                {
+                    if ( r->scr_changes == r->demux.scr_changes )
+                    {
+                        // This packet is referenced to the same SCR as the last.
+                        // Adjust timestamp to remove the System Clock Reference
+                        // offset then update the average inter-packet time
+                        // for this stream.
+                        buf->renderOffset -= r->scr_offset;
+                        update_ipt( r, buf );
+                    }
+                    else
+                    {
+                        // This is the first audio or video packet after an SCR
+                        // change. Compute a new scr offset that would make this
+                        // packet follow the last of this stream with the correct
+                        // average spacing.
+                        stream_timing_t *st = find_st( r, buf );
+
+                        if ( st )
+                        {
+                            // if this is the video stream and we don't have
+                            // audio yet or this is an audio stream
+                            // generate a new scr
+                            if ( st->is_audio ||
+                                 ( st == r->stream_timing && !r->saw_audio ) )
+                            {
+                                new_scr_offset( r, buf );
+                            }
+                            else
+                            {
+                                // defer the scr change until we get some
+                                // audio since audio has a timestamp per
+                                // frame but video & subtitles don't. Clear
+                                // the timestamps so the decoder will generate
+                                // them from the frame durations.
+                                if ( st != r->stream_timing )
+                                {
+                                    // not a video stream so it's probably
+                                    // subtitles - the best we can do is to
+                                    // line it up with the last video packet.
+                                    buf->start = r->stream_timing->last;
+                                }
+                                else
+                                {
+                                    buf->start = -1;
+                                    buf->renderOffset = -1;
+                                }
+                            }
+                        }
+                        else
+                        {
+                            // we got a new scr at the same time as the first
+                            // packet of a stream we've never seen before. We
+                            // have no idea what the timing should be so toss
+                            // this buffer & wait for a stream we've already seen.
+                            hb_buffer_close( &buf );
+                            continue;
+                        }
+                    }
+                }
+                if ( buf->start != -1 )
+                {
+                    buf->start -= r->scr_offset;
+                    if ( r->job->pts_to_stop && buf->start > r->job->pts_to_stop )
+                    {
+                        // we're doing a subset of the input and we've hit the
+                        // stopping point.
+                        hb_buffer_close( &buf );
+                        goto done;
+                    }
+                }
+
+                buf->sequence = r->sequence++;
+                /* if there are mutiple output fifos, send a copy of the
+                 * buffer down all but the first (we have to not ship the
+                 * original buffer or we'll race with the thread that's
+                 * consuming the buffer & inject garbage into the data stream). */
+                for( n = 1; fifos[n] != NULL; n++)
+                {
+                    hb_buffer_t *buf_copy = hb_buffer_init( buf->size );
+                    hb_buffer_copy_settings( buf_copy, buf );
+                    memcpy( buf_copy->data, buf->data, buf->size );
+                    push_buf( r, fifos[n], buf_copy );
+                }
+                push_buf( r, fifos[0], buf );
             }
             else
             {
@@ -111,12 +446,49 @@ static void ReaderFunc( void * _r )
         }
     }
 
+  done:
+    // send empty buffers downstream to video & audio decoders to signal we're done.
+    push_buf( r, r->job->fifo_mpeg2, hb_buffer_init(0) );
+
+    hb_audio_t *audio;
+    for( n = 0; ( audio = hb_list_item( r->job->title->list_audio, n ) ); ++n )
+    {
+        if ( audio->priv.fifo_in )
+            push_buf( r, audio->priv.fifo_in, hb_buffer_init(0) );
+    }
+
+    hb_subtitle_t *subtitle;
+    for( n = 0; ( subtitle = hb_list_item( r->job->title->list_subtitle, n ) ); ++n )
+    {
+        if ( subtitle->fifo_in && subtitle->source == VOBSUB)
+            push_buf( r, subtitle->fifo_in, hb_buffer_init(0) );
+    }
+
     hb_list_empty( &list );
-    hb_buffer_close( &r->ps );
-    hb_dvd_stop( r->dvd );
-    hb_dvd_close( &r->dvd );
+    hb_buffer_close( &ps );
+    if (r->dvd)
+    {
+        hb_dvd_stop( r->dvd );
+        hb_dvd_close( &r->dvd );
+    }
+    else if (r->stream)
+    {
+        hb_stream_close(&r->stream);
+    }
 
-    hb_log( "reader: done" );
+    if ( r->stream_timing )
+    {
+        free( r->stream_timing );
+    }
+
+    hb_log( "reader: done. %d scr changes", r->demux.scr_changes );
+    if ( r->demux.dts_drops )
+    {
+        hb_log( "reader: %d drops because DTS out of range", r->demux.dts_drops );
+    }
+
+    free( r );
+    _r = NULL;
 }
 
 /***********************************************************************
@@ -124,30 +496,66 @@ static void ReaderFunc( void * _r )
  ***********************************************************************
  *
  **********************************************************************/
-static hb_fifo_t * GetFifoForId( hb_job_t * job, int id )
+static hb_fifo_t ** GetFifoForId( hb_job_t * job, int id )
 {
     hb_title_t    * title = job->title;
     hb_audio_t    * audio;
     hb_subtitle_t * subtitle;
-    int             i;
+    int             i, n;
+    static hb_fifo_t * fifos[8];
 
-    if( id == 0xE0 )
-    {
-        return job->fifo_mpeg2;
-    }
+    memset(fifos, 0, sizeof(fifos));
 
-    if( ( subtitle = hb_list_item( title->list_subtitle, 0 ) ) &&
-        id == subtitle->id )
+    if( id == title->video_id )
     {
-        return subtitle->fifo_in;
+        if( job->indepth_scan )
+        {
+            /*
+             * Ditch the video here during the indepth scan until
+             * we can improve the MPEG2 decode performance.
+             */
+            return NULL;
+        }
+        else
+        {
+            fifos[0] = job->fifo_mpeg2;
+            return fifos;
+        }
     }
 
-    for( i = 0; i < hb_list_count( title->list_audio ); i++ )
+    for( i=0; i < hb_list_count( title->list_subtitle ); i++ ) {
+        subtitle =  hb_list_item( title->list_subtitle, i );
+        if (id == subtitle->id) {
+            subtitle->hits++;
+            if( !job->indepth_scan || job->subtitle_force )
+            {
+                /*
+                 * Pass the subtitles to be processed if we are not scanning, or if
+                 * we are scanning and looking for forced subs, then pass them up
+                 * to decode whether the sub is a forced one.
+                 */
+                fifos[0] = subtitle->fifo_in;
+                return fifos;
+            }
+            break;
+        }
+    }
+    
+    if( !job->indepth_scan )
     {
-        audio = hb_list_item( title->list_audio, i );
-        if( id == audio->id )
+        n = 0;
+        for( i = 0; i < hb_list_count( title->list_audio ); i++ )
+        {
+            audio = hb_list_item( title->list_audio, i );
+            if( id == audio->id )
+            {
+                fifos[n++] = audio->priv.fifo_in;
+            }
+        }
+
+        if( n != 0 )
         {
-            return audio->fifo_in;
+            return fifos;
         }
     }