uint8_t *x264_allocated_pic;
int chap_mark; // saved chap mark when we're propagating it
- int64_t dts_next; // DTS start time value for next output frame
int64_t last_stop; // Debugging - stop time of previous input frame
int64_t init_delay;
- int64_t max_delay; // if init_delay too small, delay really needed
int64_t next_chap;
struct {
param.i_level_idc );
}
- /* Slightly faster with minimal quality lost */
- param.analyse.i_subpel_refine = 4;
-
/*
This section passes the string x264opts to libx264 for parsing into
parameter names and values.
/* set up the VUI color model & gamma to match what the COLR atom
* set in muxmp4.c says. See libhb/muxmp4.c for notes. */
-
- if ( job->title->height >= 720 )
+ if( job->color_matrix == 1 )
+ {
+ // ITU BT.601 DVD or SD TV content
+ param.vui.i_colorprim = 6;
+ param.vui.i_transfer = 1;
+ param.vui.i_colmatrix = 6;
+ }
+ else if( job->color_matrix == 2 )
+ {
+ // ITU BT.709 HD content
+ param.vui.i_colorprim = 1;
+ param.vui.i_transfer = 1;
+ param.vui.i_colmatrix = 1;
+ }
+ else if ( job->title->width >= 1280 || job->title->height >= 720 )
{
// we guess that 720p or above is ITU BT.709 HD content
param.vui.i_colorprim = 1;
param.vui.i_colmatrix = 6;
}
- if( job->pixel_ratio )
+ if( job->anamorphic.mode )
{
- param.vui.i_sar_width = job->pixel_aspect_width;
- param.vui.i_sar_height = job->pixel_aspect_height;
+ param.vui.i_sar_width = job->anamorphic.par_width;
+ param.vui.i_sar_height = job->anamorphic.par_height;
hb_log( "encx264: encoding with stored aspect %d/%d",
param.vui.i_sar_width, param.vui.i_sar_height );
}
}
- hb_log( "encx264: opening libx264 (pass %d)", job->pass );
+ hb_deep_log( 2, "encx264: opening libx264 (pass %d)", job->pass );
pv->x264 = x264_encoder_open( ¶m );
x264_encoder_headers( pv->x264, &nal, &nal_count );
x264_picture_alloc( &pv->pic_in, X264_CSP_I420,
job->width, job->height );
+ pv->pic_in.img.i_stride[2] = pv->pic_in.img.i_stride[1] = ( ( job->width + 1 ) >> 1 );
pv->x264_allocated_pic = pv->pic_in.img.plane[0];
- pv->dts_next = -1;
- pv->next_chap = 0;
-
if (job->areBframes)
{
/* Basic initDelay value is the clockrate divided by the FPS
/* The delay is 1 frames for regular b-frames, 2 for b-pyramid. */
pv->init_delay *= job->areBframes;
}
+ w->config->h264.init_delay = pv->init_delay;
return 0;
}
hb_work_private_t *pv = w->private_data;
hb_job_t *job = pv->job;
- /* Get next DTS value to use */
- int64_t dts_start = pv->dts_next;
-
- /* compute the stop time based on the original frame's duration */
- int64_t dts_stop = dts_start + get_frame_duration( pv, pic_out->i_pts );
- pv->dts_next = dts_stop;
-
/* Should be way too large */
- buf = hb_buffer_init( 3 * job->width * job->height / 2 );
+ buf = hb_video_buffer_init( job->width, job->height );
buf->size = 0;
buf->frametype = 0;
- buf->start = dts_start;
- buf->stop = dts_stop;
- /* Store the output presentation time stamp from x264 for use by muxmp4
- in off-setting b-frames with the CTTS atom. */
- buf->renderOffset = pic_out->i_pts - dts_start + pv->init_delay;
- if ( buf->renderOffset < 0 )
- {
- if ( dts_start - pic_out->i_pts > pv->max_delay )
- {
- pv->max_delay = dts_start - pic_out->i_pts;
- hb_log( "encx264: init_delay too small: "
- "is %lld need %lld", pv->init_delay,
- pv->max_delay );
- }
- buf->renderOffset = 0;
- }
+ // use the pts to get the original frame's duration.
+ int64_t duration = get_frame_duration( pv, pic_out->i_pts );
+ buf->start = pic_out->i_pts;
+ buf->stop = pic_out->i_pts + duration;
/* Encode all the NALs we were given into buf.
NOTE: This code assumes one video frame per NAL (but there can
// make sure we found at least one video frame
if ( buf->size <= 0 )
{
- // no video: back up the output time stamp then free the buf
- pv->dts_next = buf->start;
+ // no video - discard the buf
hb_buffer_close( &buf );
}
return buf;
/* Point x264 at our current buffers Y(UV) data. */
pv->pic_in.img.plane[0] = in->data;
+ int uvsize = ( (job->width + 1) >> 1 ) * ( (job->height + 1) >> 1 );
if( job->grayscale )
{
/* XXX x264 has currently no option for grayscale encoding */
- memset( pv->pic_in.img.plane[1], 0x80, job->width * job->height / 4 );
- memset( pv->pic_in.img.plane[2], 0x80, job->width * job->height / 4 );
+ memset( pv->pic_in.img.plane[1], 0x80, uvsize );
+ memset( pv->pic_in.img.plane[2], 0x80, uvsize );
}
else
{
/* Point x264 at our buffers (Y)UV data */
pv->pic_in.img.plane[1] = in->data + job->width * job->height;
- pv->pic_in.img.plane[2] = in->data + 5 * job->width * job->height / 4;
- }
-
- if( pv->dts_next == -1 )
- {
- /* we don't have a start time yet so use the first frame's
- * start. All other frame times will be determined by the
- * sum of the prior output frame durations in *DTS* order
- * (not by the order they arrive here). This timing change is
- * essential for VFR with b-frames but a complete nop otherwise.
- */
- pv->dts_next = in->start;
+ pv->pic_in.img.plane[2] = pv->pic_in.img.plane[1] + uvsize;
}
if( in->new_chap && job->chapter_markers )
{
// the x264_encoder_encode call (since it reorders frames).
save_frame_info( pv, in );
- /* Feed the input DTS to x264 so it can figure out proper output PTS */
+ /* Feed the input PTS to x264 so it can figure out proper output PTS */
pv->pic_in.i_pts = in->start;
x264_picture_t pic_out;
hb_work_private_t *pv = w->private_data;
hb_buffer_t *in = *buf_in;
+ *buf_out = NULL;
+
if( in->size <= 0 )
{
// EOF on input. Flush any frames still in the decoder then
break;
hb_buffer_t *buf = nal_encode( w, &pic_out, i_nal, nal );
- if ( last_buf == NULL )
- *buf_out = buf;
- else
- last_buf->next = buf;
- last_buf = buf;
+ if ( buf )
+ {
+ if ( last_buf == NULL )
+ *buf_out = buf;
+ else
+ last_buf->next = buf;
+ last_buf = buf;
+ }
}
// Flushed everything - add the eof to the end of the chain.
if ( last_buf == NULL )
}
// Not EOF - encode the packet & wrap it in a NAL
+
+ // if we're re-ordering frames, check if this frame is too large to reorder
if ( pv->init_delay && in->stop - in->start > pv->init_delay )
{
// This frame's duration is larger than the time allotted for b-frame
new_stop = orig_stop;
in->stop = new_stop;
hb_buffer_t *buf = x264_encode( w, in );
- if ( last_buf == NULL )
- *buf_out = buf;
- else
- last_buf->next = buf;
- last_buf = buf;
+ if ( buf )
+ {
+ if ( last_buf == NULL )
+ *buf_out = buf;
+ else
+ last_buf->next = buf;
+ last_buf = buf;
+ }
in->start = new_stop;
}
}