-$Id: BUILD,v 1.11 2005/10/23 01:35:59 titer Exp $\r
-\r
-BUILD file for HandBrake <http://handbrake.m0k.org/>\r
-\r
-Building HandBrake with make\r
-=============================\r
-\r
-Step 1: get needed tools\r
-==============\r
-\r
-+ gcc and g++\r
- There are usually included in your OS' dev tools. On BeOS/Zeta, the\r
- default gcc isn't enough, gcc 2.95.3 is required.\r
-\r
-+ nasm (Only for x86. On Mac OS X Intel, Xcode 2.4.1 include it)\r
-\r
-Cygwin setup:\r
- There are a couple extra things required to make the code build for Cygwin.\r
- Make sure you have /bin and /usr/bin on your path *first*, before\r
- the Windows paths. Otherwise the Cygwin find.exe won't be used, and\r
- lame won't build.\r
- Also, I have not tried to build this with MinGW, I've only built it with\r
- the Cygwin environment, so you should build with Cygwin gcc and dev tools.\r
- Unfortunately this means you need to have cygwin1.dll around to run the\r
- HandbrakeCLI.exe program, but that's the way it is for now, until I get time\r
- to try building it with MinGW. If you want to try making it work with\r
- MinGW, then go for it!\r
-\r
-Step 2: configuration\r
-==============\r
-\r
-The HB_BUILD and HB_VERSION are defined in a single file, the Makefile correct the values in Xcode too.\r
-\r
-The file where the informations are stored is Makefile.config\r
-\r
-Step 3: build\r
-==============\r
-\r
-Run `make'. This will build libhb, Handbrake and HandBrakeCLI as Universal Binary.\r
-This build method use precompiled contrib libraries. Script to build those binaries are provided too.\r
-All the build is handled by Xcode 2.4.1, should work on powerPC and Intel Macs.\r
-\r
-# To build under Cygwin simply use the command:\r
-make HandbrakeCLI\r
-\r
-This will download pre-compiled libaries and build the handbrake source.\r
-\r
------------------------------------------------------------------------------------------------------\r
-\r
-Building HandBrake with jam\r
-=============================\r
-\r
-You can build HandBrake on BeOS, MacOS X, Linux, and on Windows using Cygwin.\r
-If you'd like to port it to another OS, email me (titer@m0k.org).\r
-\r
-Step 1: get needed tools\r
-==============\r
-\r
-+ gcc and g++\r
- There are usually included in your OS' dev tools. On BeOS/Zeta, the\r
- default gcc isn't enough, gcc 2.95.3 is required.\r
-+ jam\r
- I use 2.5rc3, earlier versions might cause issues.\r
- On BeOS, you can download it at <http://www.haiku-os.org/develop.php>.\r
- On OS X, you cannot use the modified jam shipped with the developer\r
- tools, use this one instead:\r
- <http://download.m0k.org/handbrake/jam-2.5rc3-OSX.zip>.\r
- On Cygwin, get the jam source from\r
- http://public.perforce.com/public/jam/index.html,\r
- compile it with gcc in Cygwin, and put the jam executable somewhere on\r
- your path.\r
-+ nasm (Only for x86. On Mac OS X Intel, Xcode 2.4.1 include it)\r
-\r
-Cygwin setup:\r
- There are a couple extra things required to make the code build for Cygwin.\r
- Make sure you have /bin and /usr/bin on your path *first*, before\r
- the Windows paths. Otherwise the Cygwin find.exe won't be used, and\r
- lame won't build.\r
- Also, I have not tried to build this with MinGW, I've only built it with\r
- the Cygwin environment, so you should build with Cygwin gcc and dev tools.\r
- Unfortunately this means you need to have cygwin1.dll around to run the\r
- HandbrakeCLI.exe program, but that's the way it is for now, until I get time\r
- to try building it with MinGW. If you want to try making it work with\r
- MinGW, then go for it!\r
-\r
-Step 2: build\r
-==============\r
-\r
-Run `./configure && jam'. This will build every library HandBrake\r
-requires, then HandBrake itself.\r
+$Id: BUILD,v 1.11 2005/10/23 01:35:59 titer Exp $
+
+BUILD file for HandBrake <http://handbrake.fr/>
+
+Building HandBrake with make
+=============================
+
+Step 1: get needed tools
+==============
+
++ gcc and g++
+ There are usually included in your OS' dev tools. On BeOS/Zeta, the
+ default gcc isn't enough, gcc 2.95.3 is required.
+
++ nasm (Only for x86. On Mac OS X Intel, Xcode 2.4.1 include it)
+
+Cygwin:
+ See Trac > Windows Compile Guide
+
+Step 2: configuration
+==============
+
+The HB_BUILD and HB_VERSION are defined in a single file, the Makefile correct the values in Xcode too.
+
+The file where the informations are stored is Makefile.config
+
+Step 3: build
+==============
+
+Run `make'. This will build libhb, Handbrake and HandBrakeCLI as Universal Binary.
+This build method use precompiled contrib libraries. Script to build those binaries are provided too.
+All the build is handled by Xcode 2.4.1, should work on powerPC and Intel Macs.
+
+# To build under Cygwin simply use the command:
+make HandbrakeCLI
+
+This will download pre-compiled libaries and build the handbrake source.
+
+-----------------------------------------------------------------------------------------------------
+
+Building HandBrake with jam
+=============================
+
+You can build HandBrake on BeOS, MacOS X, Linux, and on Windows using Cygwin.
+If you'd like to port it to another OS, email me (titer@m0k.org).
+
+Step 1: get needed tools
+==============
+
++ gcc and g++
+ There are usually included in your OS' dev tools. On BeOS/Zeta, the
+ default gcc isn't enough, gcc 2.95.3 is required.
+
++ jam
+ I use 2.5rc3, earlier versions might cause issues.
+ On BeOS, you can download it at <http://www.haiku-os.org/develop.php>.
+ On OS X, you cannot use the modified jam shipped with the developer
+ tools, use the one included in the Handbrake svn checkout instead.
+ On Cygwin, get the jam source from
+ http://public.perforce.com/public/jam/index.html,
+ compile it with gcc in Cygwin, and put the jam executable somewhere on
+ your path.
+
++ nasm (Only for x86. On Mac OS X Intel, Xcode 2.4.1 include it)
+
++ libtool, autoconf, automake
+ To build libdca (the DTS audio extraction library) on Mac OS X via jam, you'll
+ need to update the default Mac OS X versions of libtool, autoconf and automake.
+ Compilation has been seen to work with libtool and libtool-shlibs v1.5.22-1000,
+ autoconf v2.60-4, and automake v1.9.6-3. You can update these tools using Fink.
+ Download the Fink 0.8.1 Binary Installer for your platform (PowerPC or Intel)
+ from http://www.finkproject.org/download/index.php?phpLang=en and install Fink
+ using the installer. If you want to use a GUI to run Fink, you can install
+ FinkCommander. Download the FinkCommander 0.5.4 installer from
+ http://finkcommander.sourceforge.net/ and install from the disk image. You can
+ install libtool, libtool-shlibs, autoconf and automake using FinkCommander.
+
+Cygwin:
+ See Trac > Windows Compile Guide
+
+Step 2: build
+==============
+
+Run `./configure && jam'. This will build every library HandBrake
+requires, then HandBrake itself.
OSDN Git Service
