+%</ja>
+
+\begin{LTXexample}
+\fontspec[Numbers=OldStyle]{TeX Gyre Termes}
+\jfontspec{IPAexMincho}
+JIS~X~0213:2004→辻
+
+\addjfontfeatures{CJKShape=JIS1990}
+JIS~X~0208:1990→辻
+\end{LTXexample}
+
+%<*en>
+Note that there is no command named \verb+\setmonojfont+, since it is
+popular for Japanese fonts that nearly all Japanese glyphs have same
+widths. Also note that the kerning feature is set off by default in
+these 7~commands, since this feature and \textbf{JAglue} will clash (see
+\ref{para-kern}).
+%</en>
+%<*ja>
+和文フォントについては全ての和文文字のグリフがほぼ等幅であるのが普通であるため,
+\verb+\setmonojfont+ コマンドは存在しないことに注意.また,これらの和文用の7つのコマ
+ンドでは Kerning feature はデフォルトでは off となっている.これはこの
+feature が \textbf{JAglue} と衝突するためである(\ref{para-kern} 節を見よ).
+%</ja>
+
+%<en>\section{Changing Parameters}
+%<ja>\section{パラメータの変更}
+
+%<*en>
+There are many parameters in \LuaTeX-ja. And due to the behavior of \LuaTeX,
+most of them are not stored as internal register of \TeX, but as an
+original storage system in \LuaTeX-ja. Hence, to assign or acquire those
+parameters, you have to use commands \verb+\ltjsetparameter+ and
+\verb+\ltjgetparameter+.
+%</en>
+%<*ja>
+\LuaTeX-ja には多くのパラメータが存在する.そして \LuaTeX の振る舞いのために,
+その多くは \TeX のレジスタにではなく,\LuaTeX-ja 独自の方法で保持されている.
+そのため,これらのパラメータを設定・取得するためには \verb+\ltjsetparameter+ と
+\verb+\ltjgetparameter+ を用いなければならない.
+%</ja>
+
+%<en>\subsection{Editing the range of \textbf{JAchar}s}
+%<ja>\subsection{\textbf{JAchar} の範囲の設定}
+
+%<*en>
+To edit the range of \textbf{JAchar}s, you have to assign a non-zero
+natural number which is less than 217 to the character range first. This
+can be done by using \verb+\ltjdefcharrange+ primitive. For example, the
+next line assigns whole characters in Supplementary Multilingual Plane
+and the character `漢' to the range number~100.
+%</en>
+%<*ja>
+\textbf{JAchar} の範囲を設定するためには,まず文字範囲に0より大きく217より小さい
+自然数を割り当てる必要がある.これには \verb+\ltjdefcharrange+ プリミティブを用いる.
+例えば,次のように書くことで追加多言語面 (SMP) にある全ての文字と `漢' の範囲番号が
+100に設定される.
+%</ja>
+\begin{lstlisting}
+\ltjdefcharrange{100}{"10000-"1FFFF,`漢}
+\end{lstlisting}
+%<*en>
+This assignment of numbers to ranges are always global, so you should
+not do this in the middle of a document.
+%</en>
+%<*ja>
+この文字範囲への番号の割り当てはいつもグローバルであり,したがって文書の途中で
+この操作をするべきではない.
+%</ja>
+
+%<*en>
+If some character has been belonged to some non-zero numbered range,
+this will be overwritten by the new setting. For example, whole SMP
+belong to the range~4 in the default setting of \LuaTeX-ja, and if you
+specify the above line, then SMP will belong to the range~100 and be
+removed from the range~4.
+%</en>
+%<*ja>
+もし指定されたある文字がある非零番号の範囲に属していたならば,これは新しい設定で
+上書きされる.例えば,SMP は全て \LuaTeX-ja のデフォルトでは4番の文字範囲に
+属しているが,上記の指定を行えば SMP は100番に属すようになり,4番からは除かれる.
+%</ja>
+
+%<*en>
+After assigning numbers to ranges, the \textsf{jacharrange} parameter can
+be used to customize which character range will be treated as ranges of
+\textbf{JAchar}s, as the following line (this is just the default
+setting of \LuaTeX-ja):
+%</en>
+%<*ja>
+文字範囲に番号を割り当てた後は,\textsf{jacharrange} パラメータが \textbf{JAchar} と
+して扱われる文字の範囲を設定するために用いられる.例えば,以下は \LuaTeX-ja の
+初期設定である:
+%</ja>
+\begin{verbatim}
+\ltjsetparameter{jacharrange={-1, +2, +3, -4, -5, +6, +7, +8}}
+\end{verbatim}
+%<*en>
+The argument to \textsf{jacharrange} parameter is a list of integer.
+Negative integer $-n$ in the list means that `the characters that belong to
+range~$n$ are treated as \textbf{ALchar}', and positive integer $+n$ means
+that `the characters that belong to range~$n$ are treated as \textbf{JAchar}'.
+%</en>
+%<*ja>
+\textsf{jacharrange} パラメータには整数のリストを与える.
+リスト中の負の整数 $-n$ は「文字範囲 $n$ に属する文字は \textbf{ALchar} として
+扱われる」ことを意味し,正の整数 $+n$ は \textbf{JAchar} として扱うことを意味する.
+%</ja>
+
+%<*en>
+\paragraph{Default Setting}
+\LuaTeX-ja predefines eight character ranges for convenience. They are
+determined from the following data:
+%</en>
+%<*ja>
+\paragraph{初期設定}
+\LuaTeX-ja では8つの文字範囲を設定している.これらは以下のデータに基づいて決定して
+いる.
+%</ja>
+\begin{itemize}
+%<*en>
+\item Blocks in Unicode~6.0.
+%</en>
+%<*ja>
+\item Unicode~6.0 のブロック.
+%</ja>
+%<*en>
+\item The \texttt{Adobe-Japan1-UCS2} mapping between a CID Adobe-Japan1-6 and Unicode.
+%</en>
+%<*ja>
+\item \texttt{Adobe-Japan1-UCS2} による Adobe-Japan1-6 の CID と Unicode の間の
+ マッピング.
+%</ja>
+%<*en>
+\item The \texttt{PXbase} bundle for \upTeX\ by Takayuki Yato.
+%</en>
+%<*ja>
+\item 八登崇之氏による \upTeX 用の \texttt{PXbase} バンドル.
+%</ja>
+\end{itemize}
+
+%<*en>
+Now we describe these eight ranges. The alphabet `J' or `A' after the
+number shows whether characters in the range is treated as
+\textbf{JAchar}s or not by default. These settings are similar to the
+\texttt{prefercjk} settings defined in \texttt{PXbase} bundle.
+%</en>
+%<*ja>
+以下ではこれら8つの文字範囲について記述する.番号のあとのアルファベット `J' と `A'
+はデフォルトで \textbf{JAchar} として扱われるかどうかを示す.これらの設定は
+\texttt{PXbase} バンドルで定義されている \texttt{prefercjk} と類似のものである.
+%</ja>
+\begin{description}
+%<*en>
+\item[Range~8${}^{\text{J}}$] Symbols in the intersection of the upper half of ISO~8859-1
+ (Latin-1 Supplement) and JIS~X~0208 (a basic character set for Japanese). This character range
+ consists of the following characters:
+%</en>
+%<*ja>
+\item{範囲 8${}^{\text{J}}$} ISO~8869~1 の上半分(ラテン1補助)と
+ JIS~X~0208 の共通部分にある記号.この文字範囲は
+ 以下の文字で構成される:
+%</ja>
+\begin{multicols}{2}
+\begin{itemize}
+\def\ch#1#2{\item \char"#1\ (\texttt{U+00#1}, #2)}%"
+%<*en>
+\ch{A7}{Section Sign}
+\ch{A8}{Diaeresis}
+\ch{B0}{Degree sign}
+\ch{B1}{Plus-minus sign}
+\ch{B4}{Spacing acute}
+\ch{B6}{Paragraph sign}
+\ch{D7}{Multiplication sign}
+\ch{F7}{Division Sign}
+%</en>
+%<*ja>
+\ch{A7}{節記号}
+\ch{A8}{トレマ}
+\ch{B0}{度}
+\ch{B1}{正又は負符号}
+\ch{B4}{アキュート・アクセント}
+\ch{B6}{段落記号}
+\ch{D7}{乗算記号}
+\ch{F7}{除算記号}
+%</ja>
+\end{itemize}
+\end{multicols}
+
+%<*en>
+\item[Range~1${}^{\text{A}}$] Latin characters that some of them are included in Adobe-Japan1-6.
+This range consist of the following Unicode ranges, \emph{except characters in the range~8 above}:
+%</en>
+%<*ja>
+\item{範囲 1${}^{\text{A}}$} ラテン文字.一部はAdobe-Japan1-6 にも含まれている.
+ この範囲は以下の Unicode のブロックから構成されている.
+ \textbf{ただし,範囲 8 は除く.}
+%</ja>
+\begin{multicols}{2}
+\begin{itemize}
+%<*en>
+\item \texttt{U+0080}--\texttt{U+00FF}: Latin-1 Supplement
+\item \texttt{U+0100}--\texttt{U+017F}: Latin Extended-A
+\item \texttt{U+0180}--\texttt{U+024F}: Latin Extended-B
+\item \texttt{U+0250}--\texttt{U+02AF}: IPA Extensions
+\item \texttt{U+02B0}--\texttt{U+02FF}: Spacing Modifier Letters
+\item \texttt{U+0300}--\texttt{U+036F}: Combining Diacritical Marks
+\item \texttt{U+1E00}--\texttt{U+1EFF}: Latin Extended Additional
+%</en>
+%<*ja>
+\item \texttt{U+0080}--\texttt{U+00FF}: ラテン1補助
+\item \texttt{U+0100}--\texttt{U+017F}: ラテン文字拡張A
+\item \texttt{U+0180}--\texttt{U+024F}: ラテン文字拡張B
+\item \texttt{U+0250}--\texttt{U+02AF}: IPA拡張(国際音声記号)
+\item \texttt{U+02B0}--\texttt{U+02FF}: 前進を伴う修飾文字
+\item \texttt{U+0300}--\texttt{U+036F}: ダイアクリティカルマーク(合成可能)
+\item \texttt{U+1E00}--\texttt{U+1EFF}: ラテン文字拡張追加
+%</ja>
+\par\
+\end{itemize}
+\end{multicols}
+%<*en>
+\item[Range~2${}^{\text{J}}$] Greek and Cyrillic letters. JIS~X~0208 (hence most of Japanese
+ fonts) has some of these characters.
+%</en>
+%<*ja>
+\item[範囲 2${}^{\text{J}}$] ギリシャ文字とキリル文字.JIS~X~0208(したがって多くの
+ 和文フォント)はこれらの文字を持つ.
+%</ja>
+\begin{multicols}{2}
+\begin{itemize}
+%<*en>
+\item \texttt{U+0370}--\texttt{U+03FF}: Greek and Coptic
+\item \texttt{U+0400}--\texttt{U+04FF}: Cyrillic
+\item \texttt{U+1F00}--\texttt{U+1FFF}: Greek Extended
+%</en>
+%<*ja>
+\item \texttt{U+0370}--\texttt{U+03FF}: ギリシア文字及びコプト文字
+\item \texttt{U+0400}--\texttt{U+04FF}: キリル文字
+\item \texttt{U+1F00}--\texttt{U+1FFF}: キリル文字補助
+%</ja>
+\\\