int64_t last; // last timestamp seen on this stream
int id; // stream id
int is_audio; // != 0 if this is an audio stream
+ int valid; // Stream timing is not valid until next scr.
} stream_timing_t;
typedef struct
hb_title_t * title;
volatile int * die;
+ hb_bd_t * bd;
hb_dvd_t * dvd;
hb_stream_t * stream;
uint8_t st_slots; // size (in slots) of stream_timing array
uint8_t saw_video; // != 0 if we've seen video
uint8_t saw_audio; // != 0 if we've seen audio
+
+ int start_found; // found pts_to_start point
+ uint64_t st_first;
} hb_reader_t;
/***********************************************************************
**********************************************************************/
static void ReaderFunc( void * );
static hb_fifo_t ** GetFifoForId( hb_job_t * job, int id );
+static void UpdateState( hb_reader_t * r, int64_t start);
/***********************************************************************
* hb_reader_init
r->stream_timing[0].average = 90000. * (double)job->vrate_base /
(double)job->vrate;
r->stream_timing[0].last = -r->stream_timing[0].average;
+ r->stream_timing[0].valid = 1;
r->stream_timing[1].id = -1;
+ if ( !job->pts_to_start )
+ r->start_found = 1;
+
return hb_thread_init( "reader", ReaderFunc, r,
HB_NORMAL_PRIORITY );
}
static void push_buf( const hb_reader_t *r, hb_fifo_t *fifo, hb_buffer_t *buf )
{
- while( !*r->die && !r->job->done && hb_fifo_is_full( fifo ) )
+ while ( !*r->die && !r->job->done )
{
- /*
- * Loop until the incoming fifo is ready to receive
- * this buffer.
- */
- hb_snooze( 50 );
+ if ( hb_fifo_full_wait( fifo ) )
+ {
+ hb_fifo_push( fifo, buf );
+ break;
+ }
}
- hb_fifo_push( fifo, buf );
}
static int is_audio( hb_reader_t *r, int id )
// find or create the per-stream timing state for 'buf'
-static stream_timing_t *id_to_st( hb_reader_t *r, const hb_buffer_t *buf )
+static stream_timing_t *id_to_st( hb_reader_t *r, const hb_buffer_t *buf, int valid )
{
stream_timing_t *st = r->stream_timing;
while ( st->id != buf->id && st->id != -1)
}
st->id = buf->id;
st->average = 30.*90.;
- st->last = buf->renderOffset - st->average;
+ st->last = -st->average;
if ( ( st->is_audio = is_audio( r, buf->id ) ) != 0 )
{
r->saw_audio = 1;
}
st[1].id = -1;
+ st->valid = valid;
}
return st;
}
static void update_ipt( hb_reader_t *r, const hb_buffer_t *buf )
{
- stream_timing_t *st = id_to_st( r, buf );
+ stream_timing_t *st = id_to_st( r, buf, 1 );
double dt = buf->renderOffset - st->last;
- st->average += ( dt - st->average ) * (1./32.);
- st->last = buf->renderOffset;
+ // Protect against spurious bad timestamps
+ if ( dt > -5 * 90000LL && dt < 5 * 90000LL )
+ {
+ st->average += ( dt - st->average ) * (1./32.);
+ st->last = buf->renderOffset;
+ }
+ st->valid = 1;
}
// use the per-stream state associated with 'buf' to compute a new scr_offset
static void new_scr_offset( hb_reader_t *r, hb_buffer_t *buf )
{
- stream_timing_t *st = id_to_st( r, buf );
- int64_t nxt = st->last + st->average;
+ stream_timing_t *st = id_to_st( r, buf, 1 );
+ int64_t last;
+ if ( !st->valid )
+ {
+ // !valid means we've not received any previous data
+ // for this stream. There is no 'last' packet time.
+ // So approximate it with video's last time.
+ last = r->stream_timing[0].last;
+ st->valid = 1;
+ }
+ else
+ {
+ last = st->last;
+ }
+ int64_t nxt = last + st->average;
r->scr_offset = buf->renderOffset - nxt;
- buf->renderOffset = nxt;
+ // This log is handy when you need to debug timing problems...
+ //hb_log("id %x last %ld avg %g nxt %ld renderOffset %ld scr_offset %ld",
+ // buf->id, last, st->average, nxt, buf->renderOffset, r->scr_offset);
r->scr_changes = r->demux.scr_changes;
- st->last = buf->renderOffset;
+ st->last = nxt;
}
/***********************************************************************
int chapter = -1;
int chapter_end = r->job->chapter_end;
- if( !( r->dvd = hb_dvd_init( r->title->dvd ) ) )
+ if ( r->title->type == HB_BD_TYPE )
+ {
+ if ( !( r->bd = hb_bd_init( r->title->path ) ) )
+ return;
+ }
+ else if ( r->title->type == HB_DVD_TYPE )
+ {
+ if ( !( r->dvd = hb_dvd_init( r->title->path ) ) )
+ return;
+ }
+ else if ( r->title->type == HB_STREAM_TYPE )
+ {
+ if ( !( r->stream = hb_stream_open( r->title->path, r->title ) ) )
+ return;
+ }
+ else
+ {
+ // Unknown type, should never happen
+ return;
+ }
+
+ hb_buffer_t *ps = hb_buffer_init( HB_DVD_READ_BUFFER_SIZE );
+ if (r->bd)
{
- if ( !( r->stream = hb_stream_open( r->title->dvd, r->title ) ) )
+ if( !hb_bd_start( r->bd, r->title ) )
+ {
+ hb_bd_close( &r->bd );
+ hb_buffer_close( &ps );
+ return;
+ }
+ if ( r->job->start_at_preview )
{
- return;
+ // XXX code from DecodePreviews - should go into its own routine
+ hb_bd_seek( r->bd, (float)r->job->start_at_preview /
+ ( r->job->seek_points ? ( r->job->seek_points + 1.0 ) : 11.0 ) );
+ }
+ else if ( r->job->pts_to_start )
+ {
+ hb_bd_seek_pts( r->bd, r->job->pts_to_start );
+ }
+ else
+ {
+ hb_bd_seek_chapter( r->bd, r->job->chapter_start );
+ }
+ if (r->job->angle > 1)
+ {
+ hb_bd_set_angle( r->bd, r->job->angle - 1 );
}
}
-
- if (r->dvd)
+ else if (r->dvd)
{
/*
* XXX this code is a temporary hack that should go away if/when
}
/* end chapter mapping XXX */
- if( !hb_dvd_start( r->dvd, r->title->index, start ) )
+ if( !hb_dvd_start( r->dvd, r->title, start ) )
{
hb_dvd_close( &r->dvd );
+ hb_buffer_close( &ps );
return;
}
if (r->job->angle)
( r->job->seek_points ? ( r->job->seek_points + 1.0 ) : 11.0 ) );
}
+ else if ( r->stream && r->job->pts_to_start )
+ {
+ int64_t pts_to_start = r->job->pts_to_start;
+
+ // Find out what the first timestamp of the stream is
+ // and then seek to the appropriate offset from it
+ if ( hb_stream_read( r->stream, ps ) )
+ {
+ if ( ps->start > 0 )
+ pts_to_start += ps->start;
+ }
+
+ if ( hb_stream_seek_ts( r->stream, pts_to_start ) >= 0 )
+ {
+ // Seek takes us to the nearest I-frame before the timestamp
+ // that we want. So we will retrieve the start time of the
+ // first packet we get, subtract that from pts_to_start, and
+ // inspect the reset of the frames in sync.
+ r->start_found = 2;
+ r->job->pts_to_start = pts_to_start;
+ }
+ }
else if( r->stream )
{
/*
}
list = hb_list_init();
- hb_buffer_t *ps = hb_buffer_init( HB_DVD_READ_BUFFER_SIZE );
while( !*r->die && !r->job->done )
{
- if (r->dvd)
+ if (r->bd)
+ chapter = hb_bd_chapter( r->bd );
+ else if (r->dvd)
chapter = hb_dvd_chapter( r->dvd );
else if (r->stream)
chapter = hb_stream_chapter( r->stream );
break;
}
- if (r->dvd)
+ if (r->bd)
+ {
+ if( !hb_bd_read( r->bd, ps ) )
+ {
+ break;
+ }
+ }
+ else if (r->dvd)
{
if( !hb_dvd_read( r->dvd, ps ) )
{
{
break;
}
+ if ( r->start_found == 2 )
+ {
+ // We will inspect the timestamps of each frame in sync
+ // to skip from this seek point to the timestamp we
+ // want to start at.
+ if ( ps->start > 0 && ps->start < r->job->pts_to_start )
+ r->job->pts_to_start -= ps->start;
+ else if ( ps->start >= r->job->pts_to_start )
+ r->job->pts_to_start = 0;
+ r->start_found = 1;
+ }
}
if( r->job->indepth_scan )
hb_list_rem( list, buf );
fifos = GetFifoForId( r->job, buf->id );
- if ( ! r->saw_video )
+ if ( fifos && ! r->saw_video && !r->job->indepth_scan )
{
- /* The first video packet defines 'time zero' so discard
- data until we get a video packet with a PTS & DTS */
- if ( buf->id == r->title->video_id && buf->start != -1 &&
- buf->renderOffset != -1 )
+ // The first data packet with a PTS from an audio or video stream
+ // that we're decoding defines 'time zero'. Discard packets until
+ // we get one.
+ if ( buf->start != -1 && buf->renderOffset != -1 &&
+ ( buf->id == r->title->video_id || is_audio( r, buf->id ) ) )
{
// force a new scr offset computation
r->scr_changes = r->demux.scr_changes - 1;
+ // create a stream state if we don't have one so the
+ // offset will get computed correctly.
+ id_to_st( r, buf, 1 );
r->saw_video = 1;
- hb_log( "reader: first SCR %lld", r->demux.last_scr );
+ hb_log( "reader: first SCR %"PRId64" id %d DTS %"PRId64,
+ r->demux.last_scr, buf->id, buf->renderOffset );
}
else
{
{
if ( buf->renderOffset != -1 )
{
- if ( r->scr_changes == r->demux.scr_changes )
- {
- // This packet is referenced to the same SCR as the last.
- // Adjust timestamp to remove the System Clock Reference
- // offset then update the average inter-packet time
- // for this stream.
- buf->renderOffset -= r->scr_offset;
- update_ipt( r, buf );
- }
- else
+ if ( r->scr_changes != r->demux.scr_changes )
{
// This is the first audio or video packet after an SCR
// change. Compute a new scr offset that would make this
- // packet follow the last of this stream with the correct
- // average spacing.
- stream_timing_t *st = find_st( r, buf );
-
- if ( st )
+ // packet follow the last of this stream with the
+ // correct average spacing.
+ stream_timing_t *st = id_to_st( r, buf, 0 );
+
+ // if this is the video stream and we don't have
+ // audio yet or this is an audio stream
+ // generate a new scr
+ if ( st->is_audio ||
+ ( st == r->stream_timing && !r->saw_audio ) )
{
- // if this is the video stream and we don't have
- // audio yet or this is an audio stream
- // generate a new scr
- if ( st->is_audio ||
- ( st == r->stream_timing && !r->saw_audio ) )
+ new_scr_offset( r, buf );
+ }
+ else
+ {
+ // defer the scr change until we get some
+ // audio since audio has a timestamp per
+ // frame but video & subtitles don't. Clear
+ // the timestamps so the decoder will generate
+ // them from the frame durations.
+ if ( st != r->stream_timing )
{
- new_scr_offset( r, buf );
+ // not a video stream so it's probably
+ // subtitles - the best we can do is to
+ // line it up with the last video packet.
+ buf->start = r->stream_timing->last;
}
else
{
- // defer the scr change until we get some
- // audio since audio has a timestamp per
- // frame but video & subtitles don't. Clear
- // the timestamps so the decoder will generate
- // them from the frame durations.
- if ( st != r->stream_timing )
- {
- // not a video stream so it's probably
- // subtitles - the best we can do is to
- // line it up with the last video packet.
- buf->start = r->stream_timing->last;
- }
- else
- {
- buf->start = -1;
- buf->renderOffset = -1;
- }
+ buf->start = -1;
+ buf->renderOffset = -1;
}
}
- else
- {
- // we got a new scr at the same time as the first
- // packet of a stream we've never seen before. We
- // have no idea what the timing should be so toss
- // this buffer & wait for a stream we've already seen.
- hb_buffer_close( &buf );
- continue;
- }
}
}
if ( buf->start != -1 )
{
+ int64_t start = buf->start - r->scr_offset;
+ if ( !r->start_found )
+ UpdateState( r, start );
+
+ if ( !r->start_found &&
+ r->job->pts_to_start &&
+ buf->renderOffset != -1 &&
+ start >= r->job->pts_to_start )
+ {
+ // pts_to_start point found
+ // force a new scr offset computation
+ stream_timing_t *st = find_st( r, buf );
+ if ( st &&
+ (st->is_audio ||
+ ( st == r->stream_timing && !r->saw_audio ) ) )
+ {
+ // Re-zero our timestamps
+ st->last = -st->average;
+ new_scr_offset( r, buf );
+ r->start_found = 1;
+ r->job->pts_to_start = 0;
+ }
+ }
+ // This log is handy when you need to debug timing problems
+ //hb_log("id %x scr_offset %ld start %ld --> %ld",
+ // buf->id, r->scr_offset, buf->start,
+ // buf->start - r->scr_offset);
buf->start -= r->scr_offset;
- if ( r->job->pts_to_stop && buf->start > r->job->pts_to_stop )
+ }
+ if ( buf->renderOffset != -1 )
+ {
+ if ( r->scr_changes == r->demux.scr_changes )
{
- // we're doing a subset of the input and we've hit the
- // stopping point.
- hb_buffer_close( &buf );
- goto done;
+ // This packet is referenced to the same SCR as the last.
+ // Adjust timestamp to remove the System Clock Reference
+ // offset then update the average inter-packet time
+ // for this stream.
+ buf->renderOffset -= r->scr_offset;
+ update_ipt( r, buf );
}
}
+ if ( !r->start_found )
+ {
+ hb_buffer_close( &buf );
+ continue;
+ }
buf->sequence = r->sequence++;
/* if there are mutiple output fifos, send a copy of the
}
}
- done:
// send empty buffers downstream to video & audio decoders to signal we're done.
- push_buf( r, r->job->fifo_mpeg2, hb_buffer_init(0) );
-
- hb_audio_t *audio;
- for( n = 0; ( audio = hb_list_item( r->job->title->list_audio, n ) ); ++n )
+ if( !*r->die && !r->job->done )
{
- if ( audio->priv.fifo_in )
- push_buf( r, audio->priv.fifo_in, hb_buffer_init(0) );
+ push_buf( r, r->job->fifo_mpeg2, hb_buffer_init(0) );
+
+ hb_audio_t *audio;
+ for( n = 0; (audio = hb_list_item( r->job->title->list_audio, n)); ++n )
+ {
+ if ( audio->priv.fifo_in )
+ push_buf( r, audio->priv.fifo_in, hb_buffer_init(0) );
+ }
+
+ hb_subtitle_t *subtitle;
+ for( n = 0; (subtitle = hb_list_item( r->job->title->list_subtitle, n)); ++n )
+ {
+ if ( subtitle->fifo_in && subtitle->source == VOBSUB)
+ push_buf( r, subtitle->fifo_in, hb_buffer_init(0) );
+ }
}
hb_list_empty( &list );
hb_buffer_close( &ps );
- if (r->dvd)
+ if (r->bd)
+ {
+ hb_bd_stop( r->bd );
+ hb_bd_close( &r->bd );
+ }
+ else if (r->dvd)
{
hb_dvd_stop( r->dvd );
hb_dvd_close( &r->dvd );
_r = NULL;
}
+static void UpdateState( hb_reader_t * r, int64_t start)
+{
+ hb_state_t state;
+ uint64_t now;
+ double avg;
+
+ now = hb_get_date();
+ if( !r->st_first )
+ {
+ r->st_first = now;
+ }
+
+#define p state.param.working
+ state.state = HB_STATE_SEARCHING;
+ p.progress = (float) start / (float) r->job->pts_to_start;
+ if( p.progress > 1.0 )
+ {
+ p.progress = 1.0;
+ }
+ if (now > r->st_first)
+ {
+ int eta;
+
+ avg = 1000.0 * (double)start / (now - r->st_first);
+ eta = ( r->job->pts_to_start - start ) / avg;
+ p.hours = eta / 3600;
+ p.minutes = ( eta % 3600 ) / 60;
+ p.seconds = eta % 60;
+ }
+ else
+ {
+ p.rate_avg = 0.0;
+ p.hours = -1;
+ p.minutes = -1;
+ p.seconds = -1;
+ }
+#undef p
+
+ hb_set_state( r->job->h, &state );
+}
/***********************************************************************
* GetFifoForId
***********************************************************************
hb_title_t * title = job->title;
hb_audio_t * audio;
hb_subtitle_t * subtitle;
- int i, n;
- static hb_fifo_t * fifos[8];
+ int i, n, count;
+ static hb_fifo_t * fifos[100];
memset(fifos, 0, sizeof(fifos));
}
}
- if( job->indepth_scan ) {
- /*
- * Count the occurances of the subtitles, don't actually
- * return any to encode unless we are looking fro forced
- * subtitles in which case we need to look in the sub picture
- * to see if it has the forced flag enabled.
- */
- for (i=0; i < hb_list_count(title->list_subtitle); i++) {
- subtitle = hb_list_item( title->list_subtitle, i);
- if (id == subtitle->id) {
+ n = 0;
+ count = hb_list_count( title->list_subtitle );
+ count = count > 99 ? 99 : count;
+ for( i=0; i < count; i++ ) {
+ subtitle = hb_list_item( title->list_subtitle, i );
+ if (id == subtitle->id) {
+ subtitle->hits++;
+ if( !job->indepth_scan || job->select_subtitle_config.force )
+ {
/*
- * A hit, count it.
+ * Pass the subtitles to be processed if we are not scanning, or if
+ * we are scanning and looking for forced subs, then pass them up
+ * to decode whether the sub is a forced one.
*/
- subtitle->hits++;
- if( job->subtitle_force )
- {
-
- fifos[0] = subtitle->fifo_in;
- return fifos;
- }
- break;
+ fifos[n++] = subtitle->fifo_in;
}
}
- } else {
- if( ( subtitle = hb_list_item( title->list_subtitle, 0 ) ) &&
- id == subtitle->id )
- {
- fifos[0] = subtitle->fifo_in;
- return fifos;
- }
}
+ if ( n != 0 )
+ {
+ return fifos;
+ }
+
if( !job->indepth_scan )
{
n = 0;