1 /* $Id: Controller.mm,v 1.79 2005/11/04 19:41:32 titer Exp $
3 This file is part of the HandBrake source code.
4 Homepage: <http://handbrake.fr/>.
5 It may be used under the terms of the GNU General Public License. */
9 #import "HBOutputPanelController.h"
10 #import "HBPreferencesController.h"
11 #import "HBDVDDetector.h"
13 #import "HBPreviewController.h"
15 unsigned int maximumNumberOfAllowedAudioTracks = 24;
16 NSString *HBContainerChangedNotification = @"HBContainerChangedNotification";
17 NSString *keyContainerTag = @"keyContainerTag";
18 NSString *HBTitleChangedNotification = @"HBTitleChangedNotification";
19 NSString *keyTitleTag = @"keyTitleTag";
21 #define DragDropSimplePboardType @"MyCustomOutlineViewPboardType"
23 /* We setup the toolbar values here ShowPreviewIdentifier */
24 static NSString * ToggleDrawerIdentifier = @"Toggle Drawer Item Identifier";
25 static NSString * StartEncodingIdentifier = @"Start Encoding Item Identifier";
26 static NSString * PauseEncodingIdentifier = @"Pause Encoding Item Identifier";
27 static NSString * ShowQueueIdentifier = @"Show Queue Item Identifier";
28 static NSString * AddToQueueIdentifier = @"Add to Queue Item Identifier";
29 static NSString * ShowPictureIdentifier = @"Show Picture Window Item Identifier";
30 static NSString * ShowPreviewIdentifier = @"Show Preview Window Item Identifier";
31 static NSString * ShowActivityIdentifier = @"Debug Output Item Identifier";
32 static NSString * ChooseSourceIdentifier = @"Choose Source Item Identifier";
35 /*******************************
36 * HBController implementation *
37 *******************************/
38 @implementation HBController
40 + (unsigned int) maximumNumberOfAllowedAudioTracks { return maximumNumberOfAllowedAudioTracks; }
50 /* replace bundled app icon with one which is 32/64-bit savvy */
51 #if defined( __LP64__ )
52 fApplicationIcon = [[NSImage alloc] initWithContentsOfFile:[[NSBundle mainBundle] pathForImageResource:@"HandBrake-64.icns"]];
54 fApplicationIcon = [[NSImage alloc] initWithContentsOfFile:[[NSBundle mainBundle] pathForImageResource:@"HandBrake.icns"]];
56 if( fApplicationIcon != nil )
57 [NSApp setApplicationIconImage:fApplicationIcon];
59 [HBPreferencesController registerUserDefaults];
61 fQueueEncodeLibhb = NULL;
62 /* Check for check for the app support directory here as
63 * outputPanel needs it right away, as may other future methods
65 NSString *libraryDir = [NSSearchPathForDirectoriesInDomains( NSLibraryDirectory,
67 YES ) objectAtIndex:0];
68 AppSupportDirectory = [[libraryDir stringByAppendingPathComponent:@"Application Support"]
69 stringByAppendingPathComponent:@"HandBrake"];
70 if( ![[NSFileManager defaultManager] fileExistsAtPath:AppSupportDirectory] )
72 [[NSFileManager defaultManager] createDirectoryAtPath:AppSupportDirectory
75 /* Check for and create the App Support Preview directory if necessary */
76 NSString *PreviewDirectory = [AppSupportDirectory stringByAppendingPathComponent:@"Previews"];
77 if( ![[NSFileManager defaultManager] fileExistsAtPath:PreviewDirectory] )
79 [[NSFileManager defaultManager] createDirectoryAtPath:PreviewDirectory
82 outputPanel = [[HBOutputPanelController alloc] init];
83 fPictureController = [[PictureController alloc] init];
84 fQueueController = [[HBQueueController alloc] init];
85 fAdvancedOptions = [[HBAdvancedController alloc] init];
86 /* we init the HBPresets class which currently is only used
87 * for updating built in presets, may move more functionality
90 fPresetsBuiltin = [[HBPresets alloc] init];
91 fPreferencesController = [[HBPreferencesController alloc] init];
92 /* Lets report the HandBrake version number here to the activity log and text log file */
93 NSString *versionStringFull = [[NSString stringWithFormat: @"Handbrake Version: %@", [[[NSBundle mainBundle] infoDictionary] objectForKey:@"CFBundleShortVersionString"]] stringByAppendingString: [NSString stringWithFormat: @" (%@)", [[[NSBundle mainBundle] infoDictionary] objectForKey:@"CFBundleVersion"]]];
94 [self writeToActivityLog: "%s", [versionStringFull UTF8String]];
100 - (void) applicationDidFinishLaunching: (NSNotification *) notification
102 /* Init libhb with check for updates libhb style set to "0" so its ignored and lets sparkle take care of it */
103 int loggingLevel = [[[NSUserDefaults standardUserDefaults] objectForKey:@"LoggingLevel"] intValue];
104 fHandle = hb_init(loggingLevel, 0);
105 /* Optional dvd nav UseDvdNav*/
106 hb_dvd_set_dvdnav([[[NSUserDefaults standardUserDefaults] objectForKey:@"UseDvdNav"] boolValue]);
107 /* Init a separate instance of libhb for user scanning and setting up jobs */
108 fQueueEncodeLibhb = hb_init(loggingLevel, 0);
110 // Set the Growl Delegate
111 [GrowlApplicationBridge setGrowlDelegate: self];
112 /* Init others controllers */
113 [fPictureController SetHandle: fHandle];
114 [fPictureController setHBController: self];
116 [fQueueController setHandle: fQueueEncodeLibhb];
117 [fQueueController setHBController: self];
119 fChapterTitlesDelegate = [[ChapterTitles alloc] init];
120 [fChapterTable setDataSource:fChapterTitlesDelegate];
121 [fChapterTable setDelegate:fChapterTitlesDelegate];
123 /* setup the subtitles delegate and connections to table */
124 fSubtitlesDelegate = [[HBSubtitles alloc] init];
125 [fSubtitlesTable setDataSource:fSubtitlesDelegate];
126 [fSubtitlesTable setDelegate:fSubtitlesDelegate];
127 [fSubtitlesTable setRowHeight:25.0];
129 /* setup the audio controller */
130 [fAudioDelegate setHBController: self];
131 [[NSNotificationCenter defaultCenter] addObserver: self selector: @selector(autoSetM4vExtension:) name: HBMixdownChangedNotification object: nil];
133 [fPresetsOutlineView setAutosaveName:@"Presets View"];
134 [fPresetsOutlineView setAutosaveExpandedItems:YES];
136 dockIconProgress = 0;
138 /* Init QueueFile .plist */
139 [self loadQueueFile];
140 /* Run hbInstances to get any info on other instances as well as set the
141 * pid number for this instance in the case of multi-instance encoding. */
142 hbInstanceNum = [self hbInstances];
144 /* If we are a single instance it is safe to clean up the previews if there are any
145 * left over. This is a bit of a kludge but will prevent a build up of old instance
146 * live preview cruft. No danger of removing an active preview directory since they
147 * are created later in HBPreviewController if they don't exist at the moment a live
148 * preview encode is initiated. */
149 if (hbInstanceNum == 1)
151 NSString *PreviewDirectory = [NSString stringWithFormat:@"~/Library/Application Support/HandBrake/Previews"];
152 PreviewDirectory = [PreviewDirectory stringByExpandingTildeInPath];
154 NSArray *files = [ [NSFileManager defaultManager] contentsOfDirectoryAtPath: PreviewDirectory error: &error ];
155 for( NSString *file in files )
157 if( file != @"." && file != @".." )
159 [ [NSFileManager defaultManager] removeItemAtPath: [ PreviewDirectory stringByAppendingPathComponent: file ] error: &error ];
162 //an error occurred...
163 [self writeToActivityLog: "Could not remove existing preview at : %s",[file UTF8String] ];
172 /* Call UpdateUI every 1/2 sec */
174 [[NSRunLoop currentRunLoop] addTimer:[NSTimer
175 scheduledTimerWithTimeInterval:0.5
177 selector:@selector(updateUI:)
178 userInfo:nil repeats:YES]
179 forMode:NSDefaultRunLoopMode];
182 // Open debug output window now if it was visible when HB was closed
183 if ([[NSUserDefaults standardUserDefaults] boolForKey:@"OutputPanelIsOpen"])
184 [self showDebugOutputPanel:nil];
186 // Open queue window now if it was visible when HB was closed
187 if ([[NSUserDefaults standardUserDefaults] boolForKey:@"QueueWindowIsOpen"])
188 [self showQueueWindow:nil];
190 [self openMainWindow:nil];
192 /* We have to set the bool to tell hb what to do after a scan
193 * Initially we set it to NO until we start processing the queue
195 applyQueueToScan = NO;
197 /* Now we re-check the queue array to see if there are
198 * any remaining encodes to be done in it and ask the
199 * user if they want to reload the queue */
200 if ([QueueFileArray count] > 0)
202 /* run getQueueStats to see whats in the queue file */
203 [self getQueueStats];
204 /* this results in these values
205 * fEncodingQueueItem = 0;
207 * fCompletedCount = 0;
208 * fCanceledCount = 0;
212 /*On Screen Notification*/
213 NSString * alertTitle;
215 /* We check to see if there is already another instance of hb running.
216 * Note: hbInstances == 1 means we are the only instance of HandBrake.app
218 if (hbInstanceNum > 1)
220 alertTitle = [NSString stringWithFormat:
221 NSLocalizedString(@"There is already an instance of HandBrake running.", @"")];
222 NSBeginCriticalAlertSheet(
224 NSLocalizedString(@"Reload Queue", nil),
228 nil, @selector(didDimissReloadQueue:returnCode:contextInfo:), nil,
229 NSLocalizedString(@" HandBrake will now load up the existing queue.", nil));
233 if (fWorkingCount > 0 || fPendingCount > 0)
235 if (fWorkingCount > 0)
237 alertTitle = [NSString stringWithFormat:
238 NSLocalizedString(@"HandBrake Has Detected %d Previously Encoding Item(s) and %d Pending Item(s) In Your Queue.", @""),
239 fWorkingCount,fPendingCount];
243 alertTitle = [NSString stringWithFormat:
244 NSLocalizedString(@"HandBrake Has Detected %d Pending Item(s) In Your Queue.", @""),
248 NSBeginCriticalAlertSheet(
250 NSLocalizedString(@"Reload Queue", nil),
252 NSLocalizedString(@"Empty Queue", nil),
254 nil, @selector(didDimissReloadQueue:returnCode:contextInfo:), nil,
255 NSLocalizedString(@" Do you want to reload them ?", nil));
259 /* Since we addressed any pending or previously encoding items above, we go ahead and make sure the queue
260 * is empty of any finished items or cancelled items */
261 [self clearQueueAllItems];
262 /* We show whichever open source window specified in LaunchSourceBehavior preference key */
263 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"LaunchSourceBehavior"] isEqualToString: @"Open Source"])
265 [self browseSources:nil];
268 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"LaunchSourceBehavior"] isEqualToString: @"Open Source (Title Specific)"])
270 [self browseSources:(id)fOpenSourceTitleMMenu];
278 /* We show whichever open source window specified in LaunchSourceBehavior preference key */
279 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"LaunchSourceBehavior"] isEqualToString: @"Open Source"])
281 [self browseSources:nil];
284 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"LaunchSourceBehavior"] isEqualToString: @"Open Source (Title Specific)"])
286 [self browseSources:(id)fOpenSourceTitleMMenu];
289 currentQueueEncodeNameString = @"";
293 #pragma mark Multiple Instances
295 /* hbInstances checks to see if other instances of HB are running and also sets the pid for this instance for multi-instance queue encoding */
297 /* Note for now since we are in early phases of multi-instance I have put in quite a bit of logging. Can be removed as we see fit. */
300 /* check to see if another instance of HandBrake.app is running */
301 NSArray *runningAppDictionaries = [[NSWorkspace sharedWorkspace] launchedApplications];
302 NSDictionary *runningAppsDictionary;
304 NSString * thisInstanceAppPath = [[NSBundle mainBundle] bundlePath];
305 NSString * runningInstanceAppPath;
306 int runningInstancePidNum;
307 [self writeToActivityLog: "hbInstances path to this instance: %s", [thisInstanceAppPath UTF8String]];
308 for (runningAppsDictionary in runningAppDictionaries)
310 if ([[runningAppsDictionary valueForKey:@"NSApplicationName"] isEqualToString:@"HandBrake"])
312 /*Report the path to each active instances app path */
313 runningInstancePidNum = [[runningAppsDictionary valueForKey:@"NSApplicationProcessIdentifier"] intValue];
314 runningInstanceAppPath = [runningAppsDictionary valueForKey:@"NSApplicationPath"];
315 [self writeToActivityLog: "hbInstance found instance pidnum:%d at path: %s", runningInstancePidNum, [runningInstanceAppPath UTF8String]];
316 /* see if this is us by comparing the app path */
317 if ([runningInstanceAppPath isEqualToString: thisInstanceAppPath])
319 /* If so this is our pidnum */
320 [self writeToActivityLog: "hbInstance MATCH FOUND, our pidnum is:%d", runningInstancePidNum];
321 /* Get the PID number for this hb instance, used in multi instance encoding */
322 pidNum = runningInstancePidNum;
323 /* Report this pid to the activity log */
324 [self writeToActivityLog: "Pid for this instance:%d", pidNum];
325 /* Tell fQueueController what our pidNum is */
326 [fQueueController setPidNum:pidNum];
341 - (void) didDimissReloadQueue: (NSWindow *)sheet returnCode: (int)returnCode contextInfo: (void *)contextInfo
344 [self writeToActivityLog: "didDimissReloadQueue number of hb instances:%d", hbInstanceNum];
345 if (returnCode == NSAlertOtherReturn)
347 [self writeToActivityLog: "didDimissReloadQueue NSAlertOtherReturn Chosen"];
348 [self clearQueueAllItems];
350 /* We show whichever open source window specified in LaunchSourceBehavior preference key */
351 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"LaunchSourceBehavior"] isEqualToString: @"Open Source"])
353 [self browseSources:nil];
356 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"LaunchSourceBehavior"] isEqualToString: @"Open Source (Title Specific)"])
358 [self browseSources:(id)fOpenSourceTitleMMenu];
363 [self writeToActivityLog: "didDimissReloadQueue First Button Chosen"];
364 if (hbInstanceNum == 1)
367 [self setQueueEncodingItemsAsPending];
369 [self showQueueWindow:NULL];
373 - (NSApplicationTerminateReply) applicationShouldTerminate: (NSApplication *) app
378 hb_get_state( fQueueEncodeLibhb, &s );
380 if ( s.state != HB_STATE_IDLE )
382 int result = NSRunCriticalAlertPanel(
383 NSLocalizedString(@"Are you sure you want to quit HandBrake?", nil),
384 NSLocalizedString(@"If you quit HandBrake your current encode will be reloaded into your queue at next launch. Do you want to quit anyway?", nil),
385 NSLocalizedString(@"Quit", nil), NSLocalizedString(@"Don't Quit", nil), nil, @"A movie" );
387 if (result == NSAlertDefaultReturn)
389 return NSTerminateNow;
392 return NSTerminateCancel;
395 // Warn if items still in the queue
396 else if ( fPendingCount > 0 )
398 int result = NSRunCriticalAlertPanel(
399 NSLocalizedString(@"Are you sure you want to quit HandBrake?", nil),
400 NSLocalizedString(@"There are pending encodes in your queue. Do you want to quit anyway?",nil),
401 NSLocalizedString(@"Quit", nil), NSLocalizedString(@"Don't Quit", nil), nil);
403 if ( result == NSAlertDefaultReturn )
404 return NSTerminateNow;
406 return NSTerminateCancel;
409 return NSTerminateNow;
412 - (void)applicationWillTerminate:(NSNotification *)aNotification
414 [currentQueueEncodeNameString release];
415 [browsedSourceDisplayName release];
416 [outputPanel release];
417 [fQueueController release];
418 [fPreviewController release];
419 [fPictureController release];
420 [fApplicationIcon release];
423 hb_close(&fQueueEncodeLibhb);
429 - (void) awakeFromNib
432 [fWindow setExcludedFromWindowsMenu:NO];
434 [fAdvancedOptions setView:fAdvancedView];
436 /* lets setup our presets drawer for drag and drop here */
437 [fPresetsOutlineView registerForDraggedTypes: [NSArray arrayWithObject:DragDropSimplePboardType] ];
438 [fPresetsOutlineView setDraggingSourceOperationMask:NSDragOperationEvery forLocal:YES];
439 [fPresetsOutlineView setVerticalMotionCanBeginDrag: YES];
441 /* Initialize currentScanCount so HB can use it to
442 evaluate successive scans */
443 currentScanCount = 0;
446 /* Init UserPresets .plist */
449 fRipIndicatorShown = NO; // initially out of view in the nib
451 /* For 64 bit builds, the threaded animation in the progress
452 * indicators conflicts with the animation in the advanced tab
453 * for reasons not completely clear. jbrjake found a note in the
454 * 10.5 dev notes regarding this possiblility. It was also noted
455 * that unless specified, setUsesThreadedAnimation defaults to true.
456 * So, at least for now we set the indicator animation to NO for
457 * both the scan and regular progress indicators for both 32 and 64 bit
458 * as it test out fine on both and there is no reason our progress indicators
459 * should require their own thread.
462 [fScanIndicator setUsesThreadedAnimation:NO];
463 [fRipIndicator setUsesThreadedAnimation:NO];
467 /* Show/Dont Show Presets drawer upon launch based
468 on user preference DefaultPresetsDrawerShow*/
469 if( [[NSUserDefaults standardUserDefaults] boolForKey:@"DefaultPresetsDrawerShow"] > 0 )
471 [fPresetDrawer setDelegate:self];
472 NSSize drawerSize = NSSizeFromString( [[NSUserDefaults standardUserDefaults]
473 stringForKey:@"Drawer Size"] );
474 if( drawerSize.width )
475 [fPresetDrawer setContentSize: drawerSize];
476 [fPresetDrawer open];
479 /* Initially set the dvd angle widgets to hidden (dvdnav only) */
480 [fSrcAngleLabel setHidden:YES];
481 [fSrcAnglePopUp setHidden:YES];
483 /* Setup the start / stop popup */
484 [fEncodeStartStopPopUp removeAllItems];
485 [fEncodeStartStopPopUp addItemWithTitle: @"Chapters"];
486 [fEncodeStartStopPopUp addItemWithTitle: @"Seconds"];
487 [fEncodeStartStopPopUp addItemWithTitle: @"Frames"];
488 /* Align the start / stop widgets with the chapter popups */
489 [fSrcTimeStartEncodingField setFrameOrigin:[fSrcChapterStartPopUp frame].origin];
490 [fSrcTimeEndEncodingField setFrameOrigin:[fSrcChapterEndPopUp frame].origin];
492 [fSrcFrameStartEncodingField setFrameOrigin:[fSrcChapterStartPopUp frame].origin];
493 [fSrcFrameEndEncodingField setFrameOrigin:[fSrcChapterEndPopUp frame].origin];
496 NSMenuItem *menuItem;
497 [fDstFormatPopUp removeAllItems];
499 menuItem = [[fDstFormatPopUp menu] addItemWithTitle:@"MP4 file" action: NULL keyEquivalent: @""];
500 [menuItem setTag: HB_MUX_MP4];
502 menuItem = [[fDstFormatPopUp menu] addItemWithTitle:@"MKV file" action: NULL keyEquivalent: @""];
503 [menuItem setTag: HB_MUX_MKV];
505 [fDstFormatPopUp selectItemAtIndex: 0];
507 [self formatPopUpChanged:nil];
509 /* We enable the create chapters checkbox here since we are .mp4 */
510 [fCreateChapterMarkers setEnabled: YES];
511 if ([fDstFormatPopUp indexOfSelectedItem] == 0 && [[NSUserDefaults standardUserDefaults] boolForKey:@"DefaultChapterMarkers"] > 0)
513 [fCreateChapterMarkers setState: NSOnState];
519 [fDstFile2Field setStringValue: [NSString stringWithFormat:
520 @"%@/Desktop/Movie.mp4", NSHomeDirectory()]];
523 [fVidEncoderPopUp removeAllItems];
524 [fVidEncoderPopUp addItemWithTitle: @"FFmpeg"];
528 [fVidTargetSizeField setIntValue: 700];
529 [fVidBitrateField setIntValue: 1000];
531 [fVidQualityMatrix selectCell: fVidBitrateCell];
532 [self videoMatrixChanged:nil];
534 /* Video framerate */
535 [fVidRatePopUp removeAllItems];
536 [fVidRatePopUp addItemWithTitle: NSLocalizedString( @"Same as source", @"" )];
537 for( int i = 0; i < hb_video_rates_count; i++ )
539 if ([[NSString stringWithUTF8String: hb_video_rates[i].string] isEqualToString: [NSString stringWithFormat: @"%.3f",23.976]])
541 [fVidRatePopUp addItemWithTitle:[NSString stringWithFormat: @"%@%@",
542 [NSString stringWithUTF8String: hb_video_rates[i].string], @" (NTSC Film)"]];
544 else if ([[NSString stringWithUTF8String: hb_video_rates[i].string] isEqualToString: [NSString stringWithFormat: @"%d",25]])
546 [fVidRatePopUp addItemWithTitle:[NSString stringWithFormat: @"%@%@",
547 [NSString stringWithUTF8String: hb_video_rates[i].string], @" (PAL Film/Video)"]];
549 else if ([[NSString stringWithUTF8String: hb_video_rates[i].string] isEqualToString: [NSString stringWithFormat: @"%.2f",29.97]])
551 [fVidRatePopUp addItemWithTitle:[NSString stringWithFormat: @"%@%@",
552 [NSString stringWithUTF8String: hb_video_rates[i].string], @" (NTSC Video)"]];
556 [fVidRatePopUp addItemWithTitle:
557 [NSString stringWithUTF8String: hb_video_rates[i].string]];
560 [fVidRatePopUp selectItemAtIndex: 0];
562 /* Set Auto Crop to On at launch */
563 [fPictureController setAutoCrop:YES];
566 [fStatusField setStringValue: @""];
571 /* We disable the Turbo 1st pass checkbox since we are not x264 */
572 [fVidTurboPassCheck setEnabled: NO];
573 [fVidTurboPassCheck setState: NSOffState];
576 /* lets get our default prefs here */
577 [self getDefaultPresets:nil];
578 /* lets initialize the current successful scancount here to 0 */
579 currentSuccessfulScanCount = 0;
582 - (void) enableUI: (bool) b
584 NSControl * controls[] =
585 { fSrcTitleField, fSrcTitlePopUp,
586 fSrcChapterField, fSrcChapterStartPopUp, fSrcChapterToField,
587 fSrcChapterEndPopUp, fSrcDuration1Field, fSrcDuration2Field,
588 fDstFormatField, fDstFormatPopUp, fDstFile1Field, fDstFile2Field,
589 fDstBrowseButton, fVidRateField, fVidRatePopUp,fVidEncoderField, fVidEncoderPopUp, fVidQualityField,
590 fPictureSizeField,fPictureCroppingField, fVideoFiltersField,fVidQualityMatrix, fSubField, fSubPopUp,
591 fQueueStatus,fPresetsAdd,fPresetsDelete,fSrcAngleLabel,fSrcAnglePopUp,
592 fCreateChapterMarkers,fVidTurboPassCheck,fDstMp4LargeFileCheck,fSubForcedCheck,fPresetsOutlineView,
593 fDstMp4HttpOptFileCheck,fDstMp4iPodFileCheck,fVidQualityRFField,fVidQualityRFLabel,
594 fEncodeStartStopPopUp,fSrcTimeStartEncodingField,fSrcTimeEndEncodingField,fSrcFrameStartEncodingField,
595 fSrcFrameEndEncodingField, fLoadChaptersButton, fSaveChaptersButton, fFrameratePfrCheck};
598 i < sizeof( controls ) / sizeof( NSControl * ); i++ )
600 if( [[controls[i] className] isEqualToString: @"NSTextField"] )
602 NSTextField * tf = (NSTextField *) controls[i];
603 if( ![tf isBezeled] )
605 [tf setTextColor: b ? [NSColor controlTextColor] :
606 [NSColor disabledControlTextColor]];
610 [controls[i] setEnabled: b];
617 /* we also call calculatePictureSizing here to sense check if we already have vfr selected */
618 [self calculatePictureSizing:nil];
619 /* Also enable the preview window hud controls */
620 [fPictureController enablePreviewHudControls];
625 [fPresetsOutlineView setEnabled: NO];
626 [fPictureController disablePreviewHudControls];
629 [self videoMatrixChanged:nil];
630 [fAdvancedOptions enableUI:b];
634 /***********************************************************************
636 ***********************************************************************
637 * Shows a progression bar on the dock icon, filled according to
638 * 'progress' (0.0 <= progress <= 1.0).
639 * Called with progress < 0.0 or progress > 1.0, restores the original
641 **********************************************************************/
642 - (void) UpdateDockIcon: (float) progress
645 NSBitmapImageRep * bmp;
647 uint32_t black = htonl( 0x000000FF );
648 uint32_t red = htonl( 0xFF0000FF );
649 uint32_t white = htonl( 0xFFFFFFFF );
650 int row_start, row_end;
653 if( progress < 0.0 || progress > 1.0 )
655 [NSApp setApplicationIconImage: fApplicationIcon];
659 /* Get it in a raw bitmap form */
660 tiff = [fApplicationIcon TIFFRepresentationUsingCompression:
661 NSTIFFCompressionNone factor: 1.0];
662 bmp = [NSBitmapImageRep imageRepWithData: tiff];
664 /* Draw the progression bar */
665 /* It's pretty simple (ugly?) now, but I'm no designer */
667 row_start = 3 * (int) [bmp size].height / 4;
668 row_end = 7 * (int) [bmp size].height / 8;
670 for( i = row_start; i < row_start + 2; i++ )
672 pen = (uint32_t *) ( [bmp bitmapData] + i * [bmp bytesPerRow] );
673 for( j = 0; j < (int) [bmp size].width; j++ )
678 for( i = row_start + 2; i < row_end - 2; i++ )
680 pen = (uint32_t *) ( [bmp bitmapData] + i * [bmp bytesPerRow] );
683 for( j = 2; j < (int) [bmp size].width - 2; j++ )
685 if( j < 2 + (int) ( ( [bmp size].width - 4.0 ) * progress ) )
697 for( i = row_end - 2; i < row_end; i++ )
699 pen = (uint32_t *) ( [bmp bitmapData] + i * [bmp bytesPerRow] );
700 for( j = 0; j < (int) [bmp size].width; j++ )
706 /* Now update the dock icon */
707 tiff = [bmp TIFFRepresentationUsingCompression:
708 NSTIFFCompressionNone factor: 1.0];
709 NSImage* icon = [[NSImage alloc] initWithData: tiff];
710 [NSApp setApplicationIconImage: icon];
714 - (void) updateUI: (NSTimer *) timer
717 /* Update UI for fHandle (user scanning instance of libhb ) */
720 list = hb_get_titles( fHandle );
721 /* check to see if there has been a new scan done
722 this bypasses the constraints of HB_STATE_WORKING
723 not allowing setting a newly scanned source */
724 int checkScanCount = hb_get_scancount( fHandle );
725 if( checkScanCount > currentScanCount )
727 currentScanCount = checkScanCount;
728 [fScanIndicator setIndeterminate: NO];
729 [fScanIndicator setDoubleValue: 0.0];
730 [fScanIndicator setHidden: YES];
731 [self showNewScan:nil];
735 hb_get_state( fHandle, &s );
741 #define p s.param.scanning
742 case HB_STATE_SCANNING:
744 [fSrcDVD2Field setStringValue: [NSString stringWithFormat:
745 NSLocalizedString( @"Scanning title %d of %d...", @"" ),
746 p.title_cur, p.title_count]];
747 [fScanIndicator setHidden: NO];
748 [fScanIndicator setDoubleValue: 100.0 * ((double)( p.title_cur - 1 ) / p.title_count)];
753 #define p s.param.scandone
754 case HB_STATE_SCANDONE:
756 [fScanIndicator setIndeterminate: NO];
757 [fScanIndicator setDoubleValue: 0.0];
758 [fScanIndicator setHidden: YES];
759 [self writeToActivityLog:"ScanDone state received from fHandle"];
760 [self showNewScan:nil];
761 [[fWindow toolbar] validateVisibleItems];
767 #define p s.param.working
768 case HB_STATE_WORKING:
775 #define p s.param.muxing
776 case HB_STATE_MUXING:
783 case HB_STATE_PAUSED:
786 case HB_STATE_WORKDONE:
793 /* Update UI for fQueueEncodeLibhb */
795 // list = hb_get_titles( fQueueEncodeLibhb ); //fQueueEncodeLibhb
796 /* check to see if there has been a new scan done
797 this bypasses the constraints of HB_STATE_WORKING
798 not allowing setting a newly scanned source */
800 checkScanCount = hb_get_scancount( fQueueEncodeLibhb );
801 if( checkScanCount > currentScanCount )
803 currentScanCount = checkScanCount;
807 hb_get_state( fQueueEncodeLibhb, &s );
813 #define p s.param.scanning
814 case HB_STATE_SCANNING:
816 [fStatusField setStringValue: [NSString stringWithFormat:
817 NSLocalizedString( @"Queue Scanning title %d of %d...", @"" ),
818 p.title_cur, p.title_count]];
820 /* Set the status string in fQueueController as well */
821 [fQueueController setQueueStatusString: [NSString stringWithFormat:
822 NSLocalizedString( @"Queue Scanning title %d of %d...", @"" ),
823 p.title_cur, p.title_count]];
828 #define p s.param.scandone
829 case HB_STATE_SCANDONE:
831 [self writeToActivityLog:"ScanDone state received from fQueueEncodeLibhb"];
832 [self processNewQueueEncode];
833 [[fWindow toolbar] validateVisibleItems];
840 #define p s.param.working
842 case HB_STATE_SEARCHING:
844 NSMutableString * string;
845 NSString * pass_desc;
847 /* Update text field */
849 //string = [NSMutableString stringWithFormat: NSLocalizedString( @"Searching for start point: pass %d %@ of %d, %.2f %%", @"" ), p.job_cur, pass_desc, p.job_count, 100.0 * p.progress];
850 /* For now, do not announce "pass x of x for the search phase ... */
851 string = [NSMutableString stringWithFormat: NSLocalizedString( @"Searching for start point ... : %.2f %%", @"" ), 100.0 * p.progress];
855 [string appendFormat:
856 NSLocalizedString( @" (ETA %02dh%02dm%02ds)", @"" ), p.hours, p.minutes, p.seconds];
859 [fStatusField setStringValue: string];
860 /* Set the status string in fQueueController as well */
861 [fQueueController setQueueStatusString: string];
863 CGFloat progress_total = ( p.progress + p.job_cur - 1 ) / p.job_count;
864 [fRipIndicator setIndeterminate: NO];
865 [fRipIndicator setDoubleValue:100.0 * progress_total];
867 // If progress bar hasn't been revealed at the bottom of the window, do
868 // that now. This code used to be in doRip. I moved it to here to handle
869 // the case where hb_start is called by HBQueueController and not from
871 if( !fRipIndicatorShown )
873 NSRect frame = [fWindow frame];
874 if( frame.size.width <= 591 )
875 frame.size.width = 591;
876 frame.size.height += 36;
877 frame.origin.y -= 36;
878 [fWindow setFrame:frame display:YES animate:YES];
879 fRipIndicatorShown = YES;
883 /* Update dock icon */
884 /* Note not done yet */
889 case HB_STATE_WORKING:
891 NSMutableString * string;
892 NSString * pass_desc;
893 /* Update text field */
894 if (p.job_cur == 1 && p.job_count > 1)
896 if ([[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"SubtitleList"] && [[[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex]objectForKey:@"SubtitleList"] objectAtIndex:0] objectForKey:@"subtitleSourceTrackNum"] intValue] == 1)
898 pass_desc = @"(subtitle scan)";
910 string = [NSMutableString stringWithFormat: NSLocalizedString( @"Encoding: %@ \nPass %d %@ of %d, %.2f %%", @"" ), currentQueueEncodeNameString, p.job_cur, pass_desc, p.job_count, 100.0 * p.progress];
914 [string appendFormat:
915 NSLocalizedString( @" (%.2f fps, avg %.2f fps, ETA %02dh%02dm%02ds)", @"" ),
916 p.rate_cur, p.rate_avg, p.hours, p.minutes, p.seconds];
918 [fStatusField setStringValue: string];
919 [fQueueController setQueueStatusString:string];
922 CGFloat progress_total = ( p.progress + p.job_cur - 1 ) / p.job_count;
923 [fRipIndicator setIndeterminate: NO];
924 [fRipIndicator setDoubleValue:100.0 * progress_total];
926 // If progress bar hasn't been revealed at the bottom of the window, do
927 // that now. This code used to be in doRip. I moved it to here to handle
928 // the case where hb_start is called by HBQueueController and not from
930 if( !fRipIndicatorShown )
932 NSRect frame = [fWindow frame];
933 if( frame.size.width <= 591 )
934 frame.size.width = 591;
935 frame.size.height += 36;
936 frame.origin.y -= 36;
937 [fWindow setFrame:frame display:YES animate:YES];
938 fRipIndicatorShown = YES;
942 /* Update dock icon */
943 if( dockIconProgress < 100.0 * progress_total )
945 [self UpdateDockIcon: progress_total];
946 dockIconProgress += 5;
953 #define p s.param.muxing
954 case HB_STATE_MUXING:
956 /* Update text field */
957 [fStatusField setStringValue: NSLocalizedString( @"Muxing...", @"" )];
958 /* Set the status string in fQueueController as well */
959 [fQueueController setQueueStatusString: NSLocalizedString( @"Muxing...", @"" )];
961 [fRipIndicator setIndeterminate: YES];
962 [fRipIndicator startAnimation: nil];
964 /* Update dock icon */
965 [self UpdateDockIcon: 1.0];
971 case HB_STATE_PAUSED:
972 [fStatusField setStringValue: NSLocalizedString( @"Paused", @"" )];
973 [fQueueController setQueueStatusString: NSLocalizedString( @"Paused", @"" )];
977 case HB_STATE_WORKDONE:
979 // HB_STATE_WORKDONE happpens as a result of libhb finishing all its jobs
980 // or someone calling hb_stop. In the latter case, hb_stop does not clear
981 // out the remaining passes/jobs in the queue. We'll do that here.
983 // Delete all remaining jobs of this encode.
984 [fStatusField setStringValue: NSLocalizedString( @"Encode Finished.", @"" )];
985 /* Set the status string in fQueueController as well */
986 [fQueueController setQueueStatusString: NSLocalizedString( @"Encode Finished.", @"" )];
987 [fRipIndicator setIndeterminate: NO];
988 [fRipIndicator stopAnimation: nil];
989 [fRipIndicator setDoubleValue: 0.0];
990 [[fWindow toolbar] validateVisibleItems];
992 /* Restore dock icon */
993 [self UpdateDockIcon: -1.0];
994 dockIconProgress = 0;
996 if( fRipIndicatorShown )
998 NSRect frame = [fWindow frame];
999 if( frame.size.width <= 591 )
1000 frame.size.width = 591;
1001 frame.size.height += -36;
1002 frame.origin.y -= -36;
1003 [fWindow setFrame:frame display:YES animate:YES];
1004 fRipIndicatorShown = NO;
1006 /* Since we are done with this encode, tell output to stop writing to the
1007 * individual encode log
1009 [outputPanel endEncodeLog];
1010 /* Check to see if the encode state has not been cancelled
1011 to determine if we should check for encode done notifications */
1012 if( fEncodeState != 2 )
1014 NSString *pathOfFinishedEncode;
1015 /* Get the output file name for the finished encode */
1016 pathOfFinishedEncode = [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"DestinationPath"];
1018 /* Both the Growl Alert and Sending to MetaX can be done as encodes roll off the queue */
1019 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Growl Notification"] ||
1020 [[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Alert Window And Growl"])
1022 /* If Play System Alert has been selected in Preferences */
1023 if( [[NSUserDefaults standardUserDefaults] boolForKey:@"AlertWhenDoneSound"] == YES )
1027 [self showGrowlDoneNotification:pathOfFinishedEncode];
1031 [self sendToMetaX:pathOfFinishedEncode];
1033 /* since we have successfully completed an encode, we increment the queue counter */
1034 [self incrementQueueItemDone:currentQueueEncodeIndex];
1042 /* Since we can use multiple instance off of the same queue file it is imperative that we keep the QueueFileArray updated off of the QueueFile.plist
1043 * so we go ahead and do it in this existing timer as opposed to using a new one */
1045 NSMutableArray * tempQueueArray = [[NSMutableArray alloc] initWithContentsOfFile:QueueFile];
1046 [QueueFileArray setArray:tempQueueArray];
1047 [tempQueueArray release];
1048 /* Send Fresh QueueFileArray to fQueueController to update queue window */
1049 [fQueueController setQueueArray: QueueFileArray];
1050 [self getQueueStats];
1054 /* We use this to write messages to stderr from the macgui which show up in the activity window and log*/
1055 - (void) writeToActivityLog:(const char *) format, ...
1058 va_start(args, format);
1062 vsnprintf( str, 1024, format, args );
1064 time_t _now = time( NULL );
1065 struct tm * now = localtime( &_now );
1066 fprintf(stderr, "[%02d:%02d:%02d] macgui: %s\n", now->tm_hour, now->tm_min, now->tm_sec, str );
1072 #pragma mark Toolbar
1073 // ============================================================
1074 // NSToolbar Related Methods
1075 // ============================================================
1077 - (void) setupToolbar {
1078 NSToolbar *toolbar = [[[NSToolbar alloc] initWithIdentifier: @"HandBrake Toolbar"] autorelease];
1080 [toolbar setAllowsUserCustomization: YES];
1081 [toolbar setAutosavesConfiguration: YES];
1082 [toolbar setDisplayMode: NSToolbarDisplayModeIconAndLabel];
1084 [toolbar setDelegate: self];
1086 [fWindow setToolbar: toolbar];
1089 - (NSToolbarItem *) toolbar: (NSToolbar *)toolbar itemForItemIdentifier:
1090 (NSString *) itemIdent willBeInsertedIntoToolbar:(BOOL) willBeInserted {
1091 NSToolbarItem * item = [[[NSToolbarItem alloc] initWithItemIdentifier: itemIdent] autorelease];
1093 if ([itemIdent isEqualToString: ToggleDrawerIdentifier])
1095 [item setLabel: @"Toggle Presets"];
1096 [item setPaletteLabel: @"Toggler Presets"];
1097 [item setToolTip: @"Open/Close Preset Drawer"];
1098 [item setImage: [NSImage imageNamed: @"Drawer"]];
1099 [item setTarget: self];
1100 [item setAction: @selector(toggleDrawer:)];
1101 [item setAutovalidates: NO];
1103 else if ([itemIdent isEqualToString: StartEncodingIdentifier])
1105 [item setLabel: @"Start"];
1106 [item setPaletteLabel: @"Start Encoding"];
1107 [item setToolTip: @"Start Encoding"];
1108 [item setImage: [NSImage imageNamed: @"Play"]];
1109 [item setTarget: self];
1110 [item setAction: @selector(Rip:)];
1112 else if ([itemIdent isEqualToString: ShowQueueIdentifier])
1114 [item setLabel: @"Show Queue"];
1115 [item setPaletteLabel: @"Show Queue"];
1116 [item setToolTip: @"Show Queue"];
1117 [item setImage: [NSImage imageNamed: @"Queue"]];
1118 [item setTarget: self];
1119 [item setAction: @selector(showQueueWindow:)];
1120 [item setAutovalidates: NO];
1122 else if ([itemIdent isEqualToString: AddToQueueIdentifier])
1124 [item setLabel: @"Add to Queue"];
1125 [item setPaletteLabel: @"Add to Queue"];
1126 [item setToolTip: @"Add to Queue"];
1127 [item setImage: [NSImage imageNamed: @"AddToQueue"]];
1128 [item setTarget: self];
1129 [item setAction: @selector(addToQueue:)];
1131 else if ([itemIdent isEqualToString: PauseEncodingIdentifier])
1133 [item setLabel: @"Pause"];
1134 [item setPaletteLabel: @"Pause Encoding"];
1135 [item setToolTip: @"Pause Encoding"];
1136 [item setImage: [NSImage imageNamed: @"Pause"]];
1137 [item setTarget: self];
1138 [item setAction: @selector(Pause:)];
1140 else if ([itemIdent isEqualToString: ShowPictureIdentifier])
1142 [item setLabel: @"Picture Settings"];
1143 [item setPaletteLabel: @"Show Picture Settings"];
1144 [item setToolTip: @"Show Picture Settings"];
1145 [item setImage: [NSImage imageNamed: @"pref-picture"]];
1146 [item setTarget: self];
1147 [item setAction: @selector(showPicturePanel:)];
1149 else if ([itemIdent isEqualToString: ShowPreviewIdentifier])
1151 [item setLabel: @"Preview Window"];
1152 [item setPaletteLabel: @"Show Preview"];
1153 [item setToolTip: @"Show Preview"];
1154 //[item setImage: [NSImage imageNamed: @"pref-picture"]];
1155 [item setImage: [NSImage imageNamed: @"Brushed_Window"]];
1156 [item setTarget: self];
1157 [item setAction: @selector(showPreviewWindow:)];
1159 else if ([itemIdent isEqualToString: ShowActivityIdentifier])
1161 [item setLabel: @"Activity Window"];
1162 [item setPaletteLabel: @"Show Activity Window"];
1163 [item setToolTip: @"Show Activity Window"];
1164 [item setImage: [NSImage imageNamed: @"ActivityWindow"]];
1165 [item setTarget: self];
1166 [item setAction: @selector(showDebugOutputPanel:)];
1167 [item setAutovalidates: NO];
1169 else if ([itemIdent isEqualToString: ChooseSourceIdentifier])
1171 [item setLabel: @"Source"];
1172 [item setPaletteLabel: @"Source"];
1173 [item setToolTip: @"Choose Video Source"];
1174 [item setImage: [NSImage imageNamed: @"Source"]];
1175 [item setTarget: self];
1176 [item setAction: @selector(browseSources:)];
1186 - (NSArray *) toolbarDefaultItemIdentifiers: (NSToolbar *) toolbar
1188 return [NSArray arrayWithObjects: ChooseSourceIdentifier, NSToolbarSeparatorItemIdentifier, StartEncodingIdentifier,
1189 PauseEncodingIdentifier, AddToQueueIdentifier, ShowQueueIdentifier, NSToolbarFlexibleSpaceItemIdentifier,
1190 NSToolbarSpaceItemIdentifier, ShowPictureIdentifier, ShowPreviewIdentifier, ShowActivityIdentifier, ToggleDrawerIdentifier, nil];
1193 - (NSArray *) toolbarAllowedItemIdentifiers: (NSToolbar *) toolbar
1195 return [NSArray arrayWithObjects: StartEncodingIdentifier, PauseEncodingIdentifier, AddToQueueIdentifier,
1196 ChooseSourceIdentifier, ShowQueueIdentifier, ShowPictureIdentifier, ShowPreviewIdentifier, ShowActivityIdentifier, ToggleDrawerIdentifier,
1197 NSToolbarCustomizeToolbarItemIdentifier, NSToolbarFlexibleSpaceItemIdentifier,
1198 NSToolbarSpaceItemIdentifier, NSToolbarSeparatorItemIdentifier, nil];
1201 - (BOOL) validateToolbarItem: (NSToolbarItem *) toolbarItem
1203 NSString * ident = [toolbarItem itemIdentifier];
1209 hb_get_state( fHandle, &s );
1210 if (s.state == HB_STATE_SCANNING)
1213 if ([ident isEqualToString: ChooseSourceIdentifier])
1215 [toolbarItem setImage: [NSImage imageNamed: @"Stop"]];
1216 [toolbarItem setLabel: @"Cancel Scan"];
1217 [toolbarItem setPaletteLabel: @"Cancel Scanning"];
1218 [toolbarItem setToolTip: @"Cancel Scanning Source"];
1222 if ([ident isEqualToString: StartEncodingIdentifier] || [ident isEqualToString: AddToQueueIdentifier])
1227 if ([ident isEqualToString: ChooseSourceIdentifier])
1229 [toolbarItem setImage: [NSImage imageNamed: @"Source"]];
1230 [toolbarItem setLabel: @"Source"];
1231 [toolbarItem setPaletteLabel: @"Source"];
1232 [toolbarItem setToolTip: @"Choose Video Source"];
1237 hb_get_state2( fQueueEncodeLibhb, &s );
1239 if (s.state == HB_STATE_WORKING || s.state == HB_STATE_SEARCHING || s.state == HB_STATE_MUXING)
1241 if ([ident isEqualToString: StartEncodingIdentifier])
1243 [toolbarItem setImage: [NSImage imageNamed: @"Stop"]];
1244 [toolbarItem setLabel: @"Stop"];
1245 [toolbarItem setPaletteLabel: @"Stop"];
1246 [toolbarItem setToolTip: @"Stop Encoding"];
1249 if ([ident isEqualToString: PauseEncodingIdentifier])
1251 [toolbarItem setImage: [NSImage imageNamed: @"Pause"]];
1252 [toolbarItem setLabel: @"Pause"];
1253 [toolbarItem setPaletteLabel: @"Pause Encoding"];
1254 [toolbarItem setToolTip: @"Pause Encoding"];
1259 if ([ident isEqualToString: AddToQueueIdentifier])
1261 if ([ident isEqualToString: ShowPictureIdentifier])
1263 if ([ident isEqualToString: ShowPreviewIdentifier])
1267 else if (s.state == HB_STATE_PAUSED)
1269 if ([ident isEqualToString: PauseEncodingIdentifier])
1271 [toolbarItem setImage: [NSImage imageNamed: @"Play"]];
1272 [toolbarItem setLabel: @"Resume"];
1273 [toolbarItem setPaletteLabel: @"Resume Encoding"];
1274 [toolbarItem setToolTip: @"Resume Encoding"];
1277 if ([ident isEqualToString: StartEncodingIdentifier])
1279 if ([ident isEqualToString: AddToQueueIdentifier])
1281 if ([ident isEqualToString: ShowPictureIdentifier])
1283 if ([ident isEqualToString: ShowPreviewIdentifier])
1286 else if (s.state == HB_STATE_SCANNING)
1288 else if (s.state == HB_STATE_WORKDONE || s.state == HB_STATE_SCANDONE || SuccessfulScan)
1290 if ([ident isEqualToString: StartEncodingIdentifier])
1292 [toolbarItem setImage: [NSImage imageNamed: @"Play"]];
1293 if (hb_count(fHandle) > 0)
1294 [toolbarItem setLabel: @"Start Queue"];
1296 [toolbarItem setLabel: @"Start"];
1297 [toolbarItem setPaletteLabel: @"Start Encoding"];
1298 [toolbarItem setToolTip: @"Start Encoding"];
1301 if ([ident isEqualToString: AddToQueueIdentifier])
1303 if ([ident isEqualToString: ShowPictureIdentifier])
1305 if ([ident isEqualToString: ShowPreviewIdentifier])
1310 /* If there are any pending queue items, make sure the start/stop button is active */
1311 if ([ident isEqualToString: StartEncodingIdentifier] && fPendingCount > 0)
1313 if ([ident isEqualToString: ShowQueueIdentifier])
1315 if ([ident isEqualToString: ToggleDrawerIdentifier])
1317 if ([ident isEqualToString: ChooseSourceIdentifier])
1319 if ([ident isEqualToString: ShowActivityIdentifier])
1325 - (BOOL) validateMenuItem: (NSMenuItem *) menuItem
1327 SEL action = [menuItem action];
1330 hb_get_state2( fHandle, &s );
1334 if (action == @selector(addToQueue:) || action == @selector(showPicturePanel:) || action == @selector(showAddPresetPanel:))
1335 return SuccessfulScan && [fWindow attachedSheet] == nil;
1337 if (action == @selector(browseSources:))
1339 if (s.state == HB_STATE_SCANNING)
1342 return [fWindow attachedSheet] == nil;
1344 if (action == @selector(selectDefaultPreset:))
1345 return [fPresetsOutlineView selectedRow] >= 0 && [fWindow attachedSheet] == nil;
1346 if (action == @selector(Pause:))
1348 if (s.state == HB_STATE_WORKING)
1350 if(![[menuItem title] isEqualToString:@"Pause Encoding"])
1351 [menuItem setTitle:@"Pause Encoding"];
1354 else if (s.state == HB_STATE_PAUSED)
1356 if(![[menuItem title] isEqualToString:@"Resume Encoding"])
1357 [menuItem setTitle:@"Resume Encoding"];
1363 if (action == @selector(Rip:))
1365 if (s.state == HB_STATE_WORKING || s.state == HB_STATE_MUXING || s.state == HB_STATE_PAUSED)
1367 if(![[menuItem title] isEqualToString:@"Stop Encoding"])
1368 [menuItem setTitle:@"Stop Encoding"];
1371 else if (SuccessfulScan)
1373 if(![[menuItem title] isEqualToString:@"Start Encoding"])
1374 [menuItem setTitle:@"Start Encoding"];
1375 return [fWindow attachedSheet] == nil;
1381 if( action == @selector(setDefaultPreset:) )
1383 return [fPresetsOutlineView selectedRow] != -1;
1390 #pragma mark Encode Done Actions
1391 // register a test notification and make
1392 // it enabled by default
1393 #define SERVICE_NAME @"Encode Done"
1394 - (NSDictionary *)registrationDictionaryForGrowl
1396 NSDictionary *registrationDictionary = [NSDictionary dictionaryWithObjectsAndKeys:
1397 [NSArray arrayWithObjects:SERVICE_NAME,nil], GROWL_NOTIFICATIONS_ALL,
1398 [NSArray arrayWithObjects:SERVICE_NAME,nil], GROWL_NOTIFICATIONS_DEFAULT,
1401 return registrationDictionary;
1404 -(void)showGrowlDoneNotification:(NSString *) filePath
1406 /* This end of encode action is called as each encode rolls off of the queue */
1407 /* Setup the Growl stuff ... */
1408 NSString * finishedEncode = filePath;
1409 /* strip off the path to just show the file name */
1410 finishedEncode = [finishedEncode lastPathComponent];
1411 NSString * growlMssg = [NSString stringWithFormat: @"your HandBrake encode %@ is done!",finishedEncode];
1412 [GrowlApplicationBridge
1413 notifyWithTitle:@"Put down that cocktail..."
1414 description:growlMssg
1415 notificationName:SERVICE_NAME
1421 -(void)sendToMetaX:(NSString *) filePath
1423 /* This end of encode action is called as each encode rolls off of the queue */
1424 if([[NSUserDefaults standardUserDefaults] boolForKey: @"sendToMetaX"] == YES)
1426 NSString *sendToApp = [[NSUserDefaults standardUserDefaults] objectForKey: @"SendCompletedEncodeToApp"];
1427 if (![sendToApp isEqualToString:@"None"])
1429 [self writeToActivityLog: "trying to send encode to: %s", [sendToApp UTF8String]];
1430 NSAppleScript *myScript = [[NSAppleScript alloc] initWithSource: [NSString stringWithFormat: @"%@%@%@%@%@", @"tell application \"",sendToApp,@"\" to open (POSIX file \"", filePath, @"\")"]];
1431 [myScript executeAndReturnError: nil];
1438 - (void) queueCompletedAlerts
1440 /* If Play System Alert has been selected in Preferences */
1441 if( [[NSUserDefaults standardUserDefaults] boolForKey:@"AlertWhenDoneSound"] == YES )
1446 /* If Alert Window or Window and Growl has been selected */
1447 if( [[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Alert Window"] ||
1448 [[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Alert Window And Growl"] )
1450 /*On Screen Notification*/
1452 status = NSRunAlertPanel(@"Put down that cocktail...",@"Your HandBrake queue is done!", @"OK", nil, nil);
1453 [NSApp requestUserAttention:NSCriticalRequest];
1456 /* If sleep has been selected */
1457 if( [[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Put Computer To Sleep"] )
1460 NSDictionary* errorDict;
1461 NSAppleEventDescriptor* returnDescriptor = nil;
1462 NSAppleScript* scriptObject = [[NSAppleScript alloc] initWithSource:
1463 @"tell application \"Finder\" to sleep"];
1464 returnDescriptor = [scriptObject executeAndReturnError: &errorDict];
1465 [scriptObject release];
1467 /* If Shutdown has been selected */
1468 if( [[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Shut Down Computer"] )
1471 NSDictionary* errorDict;
1472 NSAppleEventDescriptor* returnDescriptor = nil;
1473 NSAppleScript* scriptObject = [[NSAppleScript alloc] initWithSource:
1474 @"tell application \"Finder\" to shut down"];
1475 returnDescriptor = [scriptObject executeAndReturnError: &errorDict];
1476 [scriptObject release];
1481 #pragma mark Get New Source
1483 /*Opens the source browse window, called from Open Source widgets */
1484 - (IBAction) browseSources: (id) sender
1488 hb_get_state( fHandle, &s );
1489 if (s.state == HB_STATE_SCANNING)
1491 [self cancelScanning:nil];
1496 NSOpenPanel * panel;
1498 panel = [NSOpenPanel openPanel];
1499 [panel setAllowsMultipleSelection: NO];
1500 [panel setCanChooseFiles: YES];
1501 [panel setCanChooseDirectories: YES ];
1502 NSString * sourceDirectory;
1503 if ([[NSUserDefaults standardUserDefaults] stringForKey:@"LastSourceDirectory"])
1505 sourceDirectory = [[NSUserDefaults standardUserDefaults] stringForKey:@"LastSourceDirectory"];
1509 sourceDirectory = @"~/Desktop";
1510 sourceDirectory = [sourceDirectory stringByExpandingTildeInPath];
1512 /* we open up the browse sources sheet here and call for browseSourcesDone after the sheet is closed
1513 * to evaluate whether we want to specify a title, we pass the sender in the contextInfo variable
1515 [panel beginSheetForDirectory: sourceDirectory file: nil types: nil
1516 modalForWindow: fWindow modalDelegate: self
1517 didEndSelector: @selector( browseSourcesDone:returnCode:contextInfo: )
1518 contextInfo: sender];
1521 - (void) browseSourcesDone: (NSOpenPanel *) sheet
1522 returnCode: (int) returnCode contextInfo: (void *) contextInfo
1524 /* we convert the sender content of contextInfo back into a variable called sender
1525 * mostly just for consistency for evaluation later
1527 id sender = (id)contextInfo;
1528 /* User selected a file to open */
1529 if( returnCode == NSOKButton )
1531 /* Free display name allocated previously by this code */
1532 [browsedSourceDisplayName release];
1534 NSString *scanPath = [[sheet filenames] objectAtIndex: 0];
1535 /* we set the last searched source directory in the prefs here */
1536 NSString *sourceDirectory = [scanPath stringByDeletingLastPathComponent];
1537 [[NSUserDefaults standardUserDefaults] setObject:sourceDirectory forKey:@"LastSourceDirectory"];
1538 /* we order out sheet, which is the browse window as we need to open
1539 * the title selection sheet right away
1541 [sheet orderOut: self];
1543 if (sender == fOpenSourceTitleMMenu || [[NSApp currentEvent] modifierFlags] & NSAlternateKeyMask)
1545 /* We put the chosen source path in the source display text field for the
1546 * source title selection sheet in which the user specifies the specific title to be
1547 * scanned as well as the short source name in fSrcDsplyNameTitleScan just for display
1548 * purposes in the title panel
1551 [fScanSrcTitlePathField setStringValue:scanPath];
1552 NSString *displayTitlescanSourceName;
1554 if ([[scanPath lastPathComponent] isEqualToString: @"VIDEO_TS"])
1556 /* If VIDEO_TS Folder is chosen, choose its parent folder for the source display name
1557 we have to use the title->path value so we get the proper name of the volume if a physical dvd is the source*/
1558 displayTitlescanSourceName = [[scanPath stringByDeletingLastPathComponent] lastPathComponent];
1562 /* if not the VIDEO_TS Folder, we can assume the chosen folder is the source name */
1563 displayTitlescanSourceName = [scanPath lastPathComponent];
1565 /* we set the source display name in the title selection dialogue */
1566 [fSrcDsplyNameTitleScan setStringValue:displayTitlescanSourceName];
1567 /* we set the attempted scans display name for main window to displayTitlescanSourceName*/
1568 browsedSourceDisplayName = [displayTitlescanSourceName retain];
1569 /* We show the actual sheet where the user specifies the title to be scanned
1570 * as we are going to do a title specific scan
1572 [self showSourceTitleScanPanel:nil];
1576 /* We are just doing a standard full source scan, so we specify "0" to libhb */
1577 NSString *path = [[sheet filenames] objectAtIndex: 0];
1579 /* We check to see if the chosen file at path is a package */
1580 if ([[NSWorkspace sharedWorkspace] isFilePackageAtPath:path])
1582 [self writeToActivityLog: "trying to open a package at: %s", [path UTF8String]];
1583 /* We check to see if this is an .eyetv package */
1584 if ([[path pathExtension] isEqualToString: @"eyetv"])
1586 [self writeToActivityLog:"trying to open eyetv package"];
1587 /* We're looking at an EyeTV package - try to open its enclosed
1589 browsedSourceDisplayName = [[[path stringByDeletingPathExtension] lastPathComponent] retain];
1591 int n = [[path stringByAppendingString: @"/"]
1592 completePathIntoString: &mpgname caseSensitive: YES
1593 matchesIntoArray: nil
1594 filterTypes: [NSArray arrayWithObject: @"mpg"]];
1597 /* Found an mpeg inside the eyetv package, make it our scan path
1598 and call performScan on the enclosed mpeg */
1600 [self writeToActivityLog:"found mpeg in eyetv package"];
1601 [self performScan:path scanTitleNum:0];
1605 /* We did not find an mpeg file in our package, so we do not call performScan */
1606 [self writeToActivityLog:"no valid mpeg in eyetv package"];
1609 /* We check to see if this is a .dvdmedia package */
1610 else if ([[path pathExtension] isEqualToString: @"dvdmedia"])
1612 /* path IS a package - but dvdmedia packages can be treaded like normal directories */
1613 browsedSourceDisplayName = [[[path stringByDeletingPathExtension] lastPathComponent] retain];
1614 [self writeToActivityLog:"trying to open dvdmedia package"];
1615 [self performScan:path scanTitleNum:0];
1619 /* The package is not an eyetv package, so we do not call performScan */
1620 [self writeToActivityLog:"unable to open package"];
1623 else // path is not a package, so we treat it as a dvd parent folder or VIDEO_TS folder
1625 /* path is not a package, so we call perform scan directly on our file */
1626 if ([[path lastPathComponent] isEqualToString: @"VIDEO_TS"])
1628 [self writeToActivityLog:"trying to open video_ts folder (video_ts folder chosen)"];
1629 /* If VIDEO_TS Folder is chosen, choose its parent folder for the source display name*/
1630 browsedSourceDisplayName = [[[path stringByDeletingLastPathComponent] lastPathComponent] retain];
1634 [self writeToActivityLog:"trying to open video_ts folder (parent directory chosen)"];
1635 /* if not the VIDEO_TS Folder, we can assume the chosen folder is the source name */
1636 /* make sure we remove any path extension as this can also be an '.mpg' file */
1637 browsedSourceDisplayName = [[path lastPathComponent] retain];
1639 applyQueueToScan = NO;
1640 [self performScan:path scanTitleNum:0];
1648 - (IBAction)showAboutPanel:(id)sender
1650 NSMutableDictionary* d = [[NSMutableDictionary alloc] initWithObjectsAndKeys:
1651 fApplicationIcon, @"ApplicationIcon",
1653 [NSApp orderFrontStandardAboutPanelWithOptions:d];
1657 /* Here we open the title selection sheet where we can specify an exact title to be scanned */
1658 - (IBAction) showSourceTitleScanPanel: (id) sender
1660 /* We default the title number to be scanned to "0" which results in a full source scan, unless the
1663 [fScanSrcTitleNumField setStringValue: @"0"];
1664 /* Show the panel */
1665 [NSApp beginSheet:fScanSrcTitlePanel modalForWindow:fWindow modalDelegate:nil didEndSelector:NULL contextInfo:NULL];
1668 - (IBAction) closeSourceTitleScanPanel: (id) sender
1670 [NSApp endSheet: fScanSrcTitlePanel];
1671 [fScanSrcTitlePanel orderOut: self];
1673 if(sender == fScanSrcTitleOpenButton)
1675 /* We setup the scan status in the main window to indicate a source title scan */
1676 [fSrcDVD2Field setStringValue: @"Opening a new source title ..."];
1677 [fScanIndicator setHidden: NO];
1678 [fScanIndicator setIndeterminate: YES];
1679 [fScanIndicator startAnimation: nil];
1681 /* We use the performScan method to actually perform the specified scan passing the path and the title
1684 applyQueueToScan = NO;
1685 [self performScan:[fScanSrcTitlePathField stringValue] scanTitleNum:[fScanSrcTitleNumField intValue]];
1689 /* Here we actually tell hb_scan to perform the source scan, using the path to source and title number*/
1690 - (void) performScan:(NSString *) scanPath scanTitleNum: (int) scanTitleNum
1693 /* use a bool to determine whether or not we can decrypt using vlc */
1694 BOOL cancelScanDecrypt = 0;
1696 NSString *path = scanPath;
1697 HBDVDDetector *detector = [HBDVDDetector detectorForPath:path];
1699 // Notify ChapterTitles that there's no title
1700 [fChapterTitlesDelegate resetWithTitle:nil];
1701 [fChapterTable reloadData];
1703 // Notify Subtitles that there's no title
1704 [fSubtitlesDelegate resetWithTitle:nil];
1705 [fSubtitlesTable reloadData];
1707 // Notify anyone interested (audio controller) that there's no title
1708 [[NSNotificationCenter defaultCenter] postNotification:
1709 [NSNotification notificationWithName: HBTitleChangedNotification
1711 userInfo: [NSDictionary dictionaryWithObjectsAndKeys:
1712 [NSData dataWithBytesNoCopy: &fTitle length: sizeof(fTitle) freeWhenDone: NO], keyTitleTag,
1715 [self enableUI: NO];
1717 if( [detector isVideoDVD] )
1719 // The chosen path was actually on a DVD, so use the raw block
1720 // device path instead.
1721 path = [detector devicePath];
1722 [self writeToActivityLog: "trying to open a physical dvd at: %s", [scanPath UTF8String]];
1724 /* lets check for vlc here to make sure we have a dylib available to use for decrypting */
1725 void *dvdcss = dlopen("libdvdcss.2.dylib", RTLD_LAZY);
1728 /*compatible vlc not found, so we set the bool to cancel scanning to 1 */
1729 cancelScanDecrypt = 1;
1730 [self writeToActivityLog: "VLC app not found for decrypting physical dvd"];
1732 status = NSRunAlertPanel(@"HandBrake could not find VLC or your VLC is incompatible (Note: 32 bit vlc is not compatible with 64 bit HandBrake and vice-versa).",@"Please download and install VLC media player if you wish to read encrypted DVDs.", @"Get VLC", @"Cancel Scan", @"Attempt Scan Anyway");
1733 [NSApp requestUserAttention:NSCriticalRequest];
1735 if (status == NSAlertDefaultReturn)
1737 /* User chose to go download vlc (as they rightfully should) so we send them to the vlc site */
1738 [[NSWorkspace sharedWorkspace] openURL:[NSURL URLWithString:@"http://www.videolan.org/vlc/download-macosx.html"]];
1740 else if (status == NSAlertAlternateReturn)
1742 /* User chose to cancel the scan */
1743 [self writeToActivityLog: "cannot open physical dvd , scan cancelled"];
1747 /* User chose to override our warning and scan the physical dvd anyway, at their own peril. on an encrypted dvd this produces massive log files and fails */
1748 cancelScanDecrypt = 0;
1749 [self writeToActivityLog: "user overrode vlc warning -trying to open physical dvd without decryption"];
1755 /* VLC was found in /Applications so all is well, we can carry on using vlc's libdvdcss.dylib for decrypting if needed */
1756 [self writeToActivityLog: "VLC app found for decrypting physical dvd"];
1762 if (cancelScanDecrypt == 0)
1764 /* we actually pass the scan off to libhb here */
1765 /* If there is no title number passed to scan, we use "0"
1766 * which causes the default behavior of a full source scan
1772 if (scanTitleNum > 0)
1774 [self writeToActivityLog: "scanning specifically for title: %d", scanTitleNum];
1776 /* We use our advanced pref to determine how many previews to scan */
1777 int hb_num_previews = [[[NSUserDefaults standardUserDefaults] objectForKey:@"PreviewsNumber"] intValue];
1778 /* We use our advanced pref to determine the minimum title length to use in seconds*/
1779 uint64_t min_title_duration_seconds = 90000L * [[[NSUserDefaults standardUserDefaults] objectForKey:@"MinTitleScanSeconds"] intValue];
1780 /* set title to NULL */
1782 [self writeToActivityLog: "Minimum length of title for scan: %d", min_title_duration_seconds];
1783 hb_scan( fHandle, [path UTF8String], scanTitleNum, hb_num_previews, 1 , min_title_duration_seconds );
1784 [fSrcDVD2Field setStringValue:@"Scanning new source ..."];
1788 - (IBAction) cancelScanning:(id)sender
1790 hb_scan_stop(fHandle);
1793 - (IBAction) showNewScan:(id)sender
1796 hb_title_t * title = NULL;
1797 int feature_title=0; // Used to store the main feature title
1799 list = hb_get_titles( fHandle );
1801 if( !hb_list_count( list ) )
1803 /* We display a message if a valid dvd source was not chosen */
1804 [fSrcDVD2Field setStringValue: @"No Valid Source Found"];
1805 SuccessfulScan = NO;
1807 // Notify ChapterTitles that there's no title
1808 [fSubtitlesDelegate resetWithTitle:nil];
1809 [fSubtitlesTable reloadData];
1811 // Notify Subtitles that there's no title
1812 [fChapterTitlesDelegate resetWithTitle:nil];
1813 [fChapterTable reloadData];
1815 // Notify anyone interested (audio controller) that there's no title
1816 [[NSNotificationCenter defaultCenter] postNotification:
1817 [NSNotification notificationWithName: HBTitleChangedNotification
1819 userInfo: [NSDictionary dictionaryWithObjectsAndKeys:
1820 [NSData dataWithBytesNoCopy: &fTitle length: sizeof(fTitle) freeWhenDone: NO], keyTitleTag,
1825 if (applyQueueToScan == YES)
1827 /* we are a rescan of an existing queue item and need to apply the queued settings to the scan */
1828 [self writeToActivityLog: "showNewScan: This is a queued item rescan"];
1831 else if (applyQueueToScan == NO)
1833 [self writeToActivityLog: "showNewScan: This is a new source item scan"];
1837 [self writeToActivityLog: "showNewScan: cannot grok scan status"];
1840 /* We increment the successful scancount here by one,
1841 which we use at the end of this function to tell the gui
1842 if this is the first successful scan since launch and whether
1843 or not we should set all settings to the defaults */
1844 currentSuccessfulScanCount++;
1846 [[fWindow toolbar] validateVisibleItems];
1848 [fSrcTitlePopUp removeAllItems];
1849 for( int i = 0; i < hb_list_count( list ); i++ )
1851 title = (hb_title_t *) hb_list_item( list, i );
1853 currentSource = [NSString stringWithUTF8String: title->name];
1854 /*Set DVD Name at top of window with the browsedSourceDisplayName grokked right before -performScan */
1855 if (!browsedSourceDisplayName)
1857 browsedSourceDisplayName = @"NoNameDetected";
1859 [fSrcDVD2Field setStringValue:browsedSourceDisplayName];
1861 /* If its a queue rescan for edit, get the queue item output path */
1862 /* if not, its a new source scan. */
1863 /* Check to see if the last destination has been set,use if so, if not, use Desktop */
1864 if (applyQueueToScan == YES)
1866 [fDstFile2Field setStringValue: [NSString stringWithFormat:@"%@", [[QueueFileArray objectAtIndex:fqueueEditRescanItemNum] objectForKey:@"DestinationPath"]]];
1868 else if ([[NSUserDefaults standardUserDefaults] stringForKey:@"LastDestinationDirectory"])
1870 [fDstFile2Field setStringValue: [NSString stringWithFormat:
1871 @"%@/%@.mp4", [[NSUserDefaults standardUserDefaults] stringForKey:@"LastDestinationDirectory"],[browsedSourceDisplayName stringByDeletingPathExtension]]];
1875 [fDstFile2Field setStringValue: [NSString stringWithFormat:
1876 @"%@/Desktop/%@.mp4", NSHomeDirectory(),[browsedSourceDisplayName stringByDeletingPathExtension]]];
1879 /* See if this is the main feature according to libhb */
1880 if (title->index == title->job->feature)
1885 [fSrcTitlePopUp addItemWithTitle: [NSString
1886 stringWithFormat: @"%s %d - %02dh%02dm%02ds",
1887 title->name,title->index, title->hours, title->minutes,
1891 /* if we are a stream, select the first title */
1892 if (title->type == HB_STREAM_TYPE)
1894 [fSrcTitlePopUp selectItemAtIndex: 0];
1898 /* if not then select the main feature title */
1899 [fSrcTitlePopUp selectItemAtIndex: feature_title];
1901 [self titlePopUpChanged:nil];
1903 SuccessfulScan = YES;
1904 [self enableUI: YES];
1906 /* if its the initial successful scan after awakeFromNib */
1907 if (currentSuccessfulScanCount == 1)
1909 [self encodeStartStopPopUpChanged:nil];
1911 [self selectDefaultPreset:nil];
1913 // Open preview window now if it was visible when HB was closed
1914 if ([[NSUserDefaults standardUserDefaults] boolForKey:@"PreviewWindowIsOpen"])
1915 [self showPreviewWindow:nil];
1917 // Open picture sizing window now if it was visible when HB was closed
1918 if ([[NSUserDefaults standardUserDefaults] boolForKey:@"PictureSizeWindowIsOpen"])
1919 [self showPicturePanel:nil];
1922 if (applyQueueToScan == YES)
1924 /* we are a rescan of an existing queue item and need to apply the queued settings to the scan */
1925 [self writeToActivityLog: "showNewScan: calling applyQueueSettingsToMainWindow"];
1926 [self applyQueueSettingsToMainWindow:nil];
1937 #pragma mark New Output Destination
1939 - (IBAction) browseFile: (id) sender
1941 /* Open a panel to let the user choose and update the text field */
1942 NSSavePanel * panel = [NSSavePanel savePanel];
1943 /* We get the current file name and path from the destination field here */
1944 [panel beginSheetForDirectory: [[fDstFile2Field stringValue] stringByDeletingLastPathComponent] file: [[fDstFile2Field stringValue] lastPathComponent]
1945 modalForWindow: fWindow modalDelegate: self
1946 didEndSelector: @selector( browseFileDone:returnCode:contextInfo: )
1950 - (void) browseFileDone: (NSSavePanel *) sheet
1951 returnCode: (int) returnCode contextInfo: (void *) contextInfo
1953 if( returnCode == NSOKButton )
1955 [fDstFile2Field setStringValue: [sheet filename]];
1956 /* Save this path to the prefs so that on next browse destination window it opens there */
1957 NSString *destinationDirectory = [[fDstFile2Field stringValue] stringByDeletingLastPathComponent];
1958 [[NSUserDefaults standardUserDefaults] setObject:destinationDirectory forKey:@"LastDestinationDirectory"];
1964 #pragma mark Main Window Control
1966 - (IBAction) openMainWindow: (id) sender
1968 [fWindow makeKeyAndOrderFront:nil];
1971 - (BOOL) windowShouldClose: (id) sender
1976 - (BOOL)applicationShouldHandleReopen:(NSApplication *)theApplication hasVisibleWindows:(BOOL)flag
1979 [fWindow makeKeyAndOrderFront:nil];
1984 - (NSSize) drawerWillResizeContents:(NSDrawer *) drawer toSize:(NSSize) contentSize {
1985 [[NSUserDefaults standardUserDefaults] setObject:NSStringFromSize( contentSize ) forKey:@"Drawer Size"];
1990 #pragma mark Queue File
1992 - (void) loadQueueFile {
1993 /* We declare the default NSFileManager into fileManager */
1994 NSFileManager * fileManager = [NSFileManager defaultManager];
1995 /*We define the location of the user presets file */
1996 QueueFile = @"~/Library/Application Support/HandBrake/Queue.plist";
1997 QueueFile = [[QueueFile stringByExpandingTildeInPath]retain];
1998 /* We check for the Queue.plist */
1999 if ([fileManager fileExistsAtPath:QueueFile] == 0)
2001 [fileManager createFileAtPath:QueueFile contents:nil attributes:nil];
2004 QueueFileArray = [[NSMutableArray alloc] initWithContentsOfFile:QueueFile];
2005 /* lets check to see if there is anything in the queue file .plist */
2006 if (nil == QueueFileArray)
2008 /* if not, then lets initialize an empty array */
2009 QueueFileArray = [[NSMutableArray alloc] init];
2013 /* ONLY clear out encoded items if we are single instance */
2014 if (hbInstanceNum == 1)
2016 [self clearQueueEncodedItems];
2021 - (void)addQueueFileItem
2023 [QueueFileArray addObject:[self createQueueFileItem]];
2024 [self saveQueueFileItem];
2028 - (void) removeQueueFileItem:(int) queueItemToRemove
2030 [QueueFileArray removeObjectAtIndex:queueItemToRemove];
2031 [self saveQueueFileItem];
2035 - (void)saveQueueFileItem
2037 [QueueFileArray writeToFile:QueueFile atomically:YES];
2038 [fQueueController setQueueArray: QueueFileArray];
2039 [self getQueueStats];
2042 - (void)getQueueStats
2044 /* lets get the stats on the status of the queue array */
2046 fEncodingQueueItem = 0;
2048 fCompletedCount = 0;
2052 /* We use a number system to set the encode status of the queue item
2054 * 0 == already encoded
2055 * 1 == is being encoded
2056 * 2 == is yet to be encoded
2061 NSEnumerator *enumerator = [QueueFileArray objectEnumerator];
2063 while (tempObject = [enumerator nextObject])
2065 NSDictionary *thisQueueDict = tempObject;
2066 if ([[thisQueueDict objectForKey:@"Status"] intValue] == 0) // Completed
2070 if ([[thisQueueDict objectForKey:@"Status"] intValue] == 1) // being encoded
2073 fEncodingQueueItem = i;
2074 /* check to see if we are the instance doing this encoding */
2075 if ([thisQueueDict objectForKey:@"EncodingPID"] && [[thisQueueDict objectForKey:@"EncodingPID"] intValue] == pidNum)
2077 currentQueueEncodeIndex = i;
2081 if ([[thisQueueDict objectForKey:@"Status"] intValue] == 2) // pending
2085 if ([[thisQueueDict objectForKey:@"Status"] intValue] == 3) // cancelled
2092 /* Set the queue status field in the main window */
2093 NSMutableString * string;
2094 if (fPendingCount == 1)
2096 string = [NSMutableString stringWithFormat: NSLocalizedString( @"%d encode pending", @"" ), fPendingCount];
2100 string = [NSMutableString stringWithFormat: NSLocalizedString( @"%d encode(s) pending", @"" ), fPendingCount];
2102 [fQueueStatus setStringValue:string];
2105 /* Used to get the next pending queue item index and return it if found */
2106 - (int)getNextPendingQueueIndex
2108 /* initialize nextPendingIndex to -1, this value tells incrementQueueItemDone that there are no pending items in the queue */
2109 int nextPendingIndex = -1;
2110 BOOL nextPendingFound = NO;
2111 NSEnumerator *enumerator = [QueueFileArray objectEnumerator];
2114 while (tempObject = [enumerator nextObject])
2116 NSDictionary *thisQueueDict = tempObject;
2117 if ([[thisQueueDict objectForKey:@"Status"] intValue] == 2 && nextPendingFound == NO) // pending
2119 nextPendingFound = YES;
2120 nextPendingIndex = [QueueFileArray indexOfObject: tempObject];
2121 [self writeToActivityLog: "getNextPendingQueueIndex next pending encod index is:%d", nextPendingIndex];
2125 return nextPendingIndex;
2129 /* This method will set any item marked as encoding back to pending
2130 * currently used right after a queue reload
2132 - (void) setQueueEncodingItemsAsPending
2134 NSEnumerator *enumerator = [QueueFileArray objectEnumerator];
2136 NSMutableArray *tempArray;
2137 tempArray = [NSMutableArray array];
2138 /* we look here to see if the preset is we move on to the next one */
2139 while ( tempObject = [enumerator nextObject] )
2141 /* We want to keep any queue item that is pending or was previously being encoded */
2142 if ([[tempObject objectForKey:@"Status"] intValue] == 1 || [[tempObject objectForKey:@"Status"] intValue] == 2)
2144 /* If the queue item is marked as "encoding" (1)
2145 * then change its status back to pending (2) which effectively
2146 * puts it back into the queue to be encoded
2148 if ([[tempObject objectForKey:@"Status"] intValue] == 1)
2150 [tempObject setObject:[NSNumber numberWithInt: 2] forKey:@"Status"];
2152 [tempArray addObject:tempObject];
2156 [QueueFileArray setArray:tempArray];
2157 [self saveQueueFileItem];
2161 /* This method will clear the queue of any encodes that are not still pending
2162 * this includes both successfully completed encodes as well as cancelled encodes */
2163 - (void) clearQueueEncodedItems
2165 NSEnumerator *enumerator = [QueueFileArray objectEnumerator];
2167 NSMutableArray *tempArray;
2168 tempArray = [NSMutableArray array];
2169 /* we look here to see if the preset is we move on to the next one */
2170 while ( tempObject = [enumerator nextObject] )
2172 /* If the queue item is either completed (0) or cancelled (3) from the
2173 * last session, then we put it in tempArray to be deleted from QueueFileArray.
2174 * NOTE: this means we retain pending (2) and also an item that is marked as
2175 * still encoding (1). If the queue has an item that is still marked as encoding
2176 * from a previous session, we can conlude that HB was either shutdown, or crashed
2177 * during the encodes so we keep it and tell the user in the "Load Queue Alert"
2179 if ([[tempObject objectForKey:@"Status"] intValue] == 0 || [[tempObject objectForKey:@"Status"] intValue] == 3)
2181 [tempArray addObject:tempObject];
2185 [QueueFileArray removeObjectsInArray:tempArray];
2186 [self saveQueueFileItem];
2189 /* This method will clear the queue of all encodes. effectively creating an empty queue */
2190 - (void) clearQueueAllItems
2192 NSEnumerator *enumerator = [QueueFileArray objectEnumerator];
2194 NSMutableArray *tempArray;
2195 tempArray = [NSMutableArray array];
2196 /* we look here to see if the preset is we move on to the next one */
2197 while ( tempObject = [enumerator nextObject] )
2199 [tempArray addObject:tempObject];
2202 [QueueFileArray removeObjectsInArray:tempArray];
2203 [self saveQueueFileItem];
2206 /* This method will duplicate prepareJob however into the
2207 * queue .plist instead of into the job structure so it can
2208 * be recalled later */
2209 - (NSDictionary *)createQueueFileItem
2211 NSMutableDictionary *queueFileJob = [[NSMutableDictionary alloc] init];
2213 hb_list_t * list = hb_get_titles( fHandle );
2214 hb_title_t * title = (hb_title_t *) hb_list_item( list,
2215 [fSrcTitlePopUp indexOfSelectedItem] );
2216 hb_job_t * job = title->job;
2220 /* We use a number system to set the encode status of the queue item
2221 * 0 == already encoded
2222 * 1 == is being encoded
2223 * 2 == is yet to be encoded
2226 [queueFileJob setObject:[NSNumber numberWithInt:2] forKey:@"Status"];
2227 /* Source and Destination Information */
2229 [queueFileJob setObject:[NSString stringWithUTF8String: title->path] forKey:@"SourcePath"];
2230 [queueFileJob setObject:[fSrcDVD2Field stringValue] forKey:@"SourceName"];
2231 [queueFileJob setObject:[NSNumber numberWithInt:title->index] forKey:@"TitleNumber"];
2232 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcAnglePopUp indexOfSelectedItem] + 1] forKey:@"TitleAngle"];
2234 /* Determine and set a variable to tell hb what start and stop times to use ... chapters vs seconds */
2235 if( [fEncodeStartStopPopUp indexOfSelectedItem] == 0 )
2237 [queueFileJob setObject:[NSNumber numberWithInt:0] forKey:@"fEncodeStartStop"];
2239 else if ([fEncodeStartStopPopUp indexOfSelectedItem] == 1)
2241 [queueFileJob setObject:[NSNumber numberWithInt:1] forKey:@"fEncodeStartStop"];
2243 else if ([fEncodeStartStopPopUp indexOfSelectedItem] == 2)
2245 [queueFileJob setObject:[NSNumber numberWithInt:2] forKey:@"fEncodeStartStop"];
2247 /* Chapter encode info */
2248 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcChapterStartPopUp indexOfSelectedItem] + 1] forKey:@"ChapterStart"];
2249 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcChapterEndPopUp indexOfSelectedItem] + 1] forKey:@"ChapterEnd"];
2250 /* Time (pts) encode info */
2251 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcTimeStartEncodingField intValue]] forKey:@"StartSeconds"];
2252 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcTimeEndEncodingField intValue] - [fSrcTimeStartEncodingField intValue]] forKey:@"StopSeconds"];
2253 /* Frame number encode info */
2254 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcFrameStartEncodingField intValue]] forKey:@"StartFrame"];
2255 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcFrameEndEncodingField intValue] - [fSrcFrameStartEncodingField intValue]] forKey:@"StopFrame"];
2258 /* The number of seek points equals the number of seconds announced in the title as that is our current granularity */
2259 int title_duration_seconds = (title->hours * 3600) + (title->minutes * 60) + (title->seconds);
2260 [queueFileJob setObject:[NSNumber numberWithInt:title_duration_seconds] forKey:@"SourceTotalSeconds"];
2262 [queueFileJob setObject:[fDstFile2Field stringValue] forKey:@"DestinationPath"];
2264 /* Lets get the preset info if there is any */
2265 [queueFileJob setObject:[fPresetSelectedDisplay stringValue] forKey:@"PresetName"];
2266 [queueFileJob setObject:[NSNumber numberWithInt:[fPresetsOutlineView selectedRow]] forKey:@"PresetIndexNum"];
2268 [queueFileJob setObject:[fDstFormatPopUp titleOfSelectedItem] forKey:@"FileFormat"];
2269 /* Chapter Markers*/
2270 /* If we have only one chapter or a title without chapters, set chapter markers to off */
2271 if ([fSrcChapterStartPopUp indexOfSelectedItem] == [fSrcChapterEndPopUp indexOfSelectedItem])
2273 [queueFileJob setObject:[NSNumber numberWithInt:0] forKey:@"ChapterMarkers"];
2277 [queueFileJob setObject:[NSNumber numberWithInt:[fCreateChapterMarkers state]] forKey:@"ChapterMarkers"];
2280 /* We need to get the list of chapter names to put into an array and store
2281 * in our queue, so they can be reapplied in prepareJob when this queue
2282 * item comes up if Chapter Markers is set to on.
2285 NSMutableArray *ChapterNamesArray = [[NSMutableArray alloc] init];
2286 int chaptercount = hb_list_count( fTitle->list_chapter );
2287 for( i = 0; i < chaptercount; i++ )
2289 hb_chapter_t *chapter = (hb_chapter_t *) hb_list_item( fTitle->list_chapter, i );
2290 if( chapter != NULL )
2292 [ChapterNamesArray addObject:[NSString stringWithCString:chapter->title encoding:NSUTF8StringEncoding]];
2295 [queueFileJob setObject:[NSMutableArray arrayWithArray: ChapterNamesArray] forKey:@"ChapterNames"];
2296 [ChapterNamesArray autorelease];
2298 /* Allow Mpeg4 64 bit formatting +4GB file sizes */
2299 [queueFileJob setObject:[NSNumber numberWithInt:[fDstMp4LargeFileCheck state]] forKey:@"Mp4LargeFile"];
2300 /* Mux mp4 with http optimization */
2301 [queueFileJob setObject:[NSNumber numberWithInt:[fDstMp4HttpOptFileCheck state]] forKey:@"Mp4HttpOptimize"];
2302 /* Add iPod uuid atom */
2303 [queueFileJob setObject:[NSNumber numberWithInt:[fDstMp4iPodFileCheck state]] forKey:@"Mp4iPodCompatible"];
2307 [queueFileJob setObject:[fVidEncoderPopUp titleOfSelectedItem] forKey:@"VideoEncoder"];
2308 /* x264 Option String */
2309 [queueFileJob setObject:[fAdvancedOptions optionsString] forKey:@"x264Option"];
2311 [queueFileJob setObject:[NSNumber numberWithInt:[fVidQualityMatrix selectedRow]] forKey:@"VideoQualityType"];
2312 [queueFileJob setObject:[fVidTargetSizeField stringValue] forKey:@"VideoTargetSize"];
2313 [queueFileJob setObject:[fVidBitrateField stringValue] forKey:@"VideoAvgBitrate"];
2314 [queueFileJob setObject:[NSNumber numberWithFloat:[fVidQualityRFField floatValue]] forKey:@"VideoQualitySlider"];
2316 [queueFileJob setObject:[fVidRatePopUp titleOfSelectedItem] forKey:@"VideoFramerate"];
2317 [queueFileJob setObject:[NSNumber numberWithInt:[fFrameratePfrCheck state]] forKey:@"VideoFrameratePFR"];
2319 /* 2 Pass Encoding */
2320 [queueFileJob setObject:[NSNumber numberWithInt:[fVidTwoPassCheck state]] forKey:@"VideoTwoPass"];
2321 /* Turbo 2 pass Encoding fVidTurboPassCheck*/
2322 [queueFileJob setObject:[NSNumber numberWithInt:[fVidTurboPassCheck state]] forKey:@"VideoTurboTwoPass"];
2324 /* Picture Sizing */
2325 /* Use Max Picture settings for whatever the dvd is.*/
2326 [queueFileJob setObject:[NSNumber numberWithInt:0] forKey:@"UsesMaxPictureSettings"];
2327 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->width] forKey:@"PictureWidth"];
2328 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->height] forKey:@"PictureHeight"];
2329 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->keep_ratio] forKey:@"PictureKeepRatio"];
2330 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->anamorphic.mode] forKey:@"PicturePAR"];
2331 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->modulus] forKey:@"PictureModulus"];
2332 /* if we are custom anamorphic, store the exact storage, par and display dims */
2333 if (fTitle->job->anamorphic.mode == 3)
2335 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->modulus] forKey:@"PicturePARModulus"];
2337 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->width] forKey:@"PicturePARStorageWidth"];
2338 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->height] forKey:@"PicturePARStorageHeight"];
2340 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->anamorphic.par_width] forKey:@"PicturePARPixelWidth"];
2341 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->anamorphic.par_height] forKey:@"PicturePARPixelHeight"];
2343 [queueFileJob setObject:[NSNumber numberWithFloat:fTitle->job->anamorphic.dar_width] forKey:@"PicturePARDisplayWidth"];
2344 [queueFileJob setObject:[NSNumber numberWithFloat:fTitle->job->anamorphic.dar_height] forKey:@"PicturePARDisplayHeight"];
2347 NSString * pictureSummary;
2348 pictureSummary = [fPictureSizeField stringValue];
2349 [queueFileJob setObject:pictureSummary forKey:@"PictureSizingSummary"];
2350 /* Set crop settings here */
2351 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController autoCrop]] forKey:@"PictureAutoCrop"];
2352 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[0]] forKey:@"PictureTopCrop"];
2353 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[1]] forKey:@"PictureBottomCrop"];
2354 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[2]] forKey:@"PictureLeftCrop"];
2355 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[3]] forKey:@"PictureRightCrop"];
2357 /* Picture Filters */
2358 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController detelecine]] forKey:@"PictureDetelecine"];
2359 [queueFileJob setObject:[fPictureController detelecineCustomString] forKey:@"PictureDetelecineCustom"];
2361 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController useDecomb]] forKey:@"PictureDecombDeinterlace"];
2362 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController decomb]] forKey:@"PictureDecomb"];
2363 [queueFileJob setObject:[fPictureController decombCustomString] forKey:@"PictureDecombCustom"];
2365 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController deinterlace]] forKey:@"PictureDeinterlace"];
2366 [queueFileJob setObject:[fPictureController deinterlaceCustomString] forKey:@"PictureDeinterlaceCustom"];
2368 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController denoise]] forKey:@"PictureDenoise"];
2369 [queueFileJob setObject:[fPictureController denoiseCustomString] forKey:@"PictureDenoiseCustom"];
2371 [queueFileJob setObject:[NSString stringWithFormat:@"%d",[fPictureController deblock]] forKey:@"PictureDeblock"];
2373 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController grayscale]] forKey:@"VideoGrayScale"];
2376 [fAudioDelegate prepareAudioForQueueFileJob: queueFileJob];
2379 NSMutableArray *subtitlesArray = [[NSMutableArray alloc] initWithArray:[fSubtitlesDelegate getSubtitleArray] copyItems:YES];
2380 [queueFileJob setObject:[NSArray arrayWithArray: subtitlesArray] forKey:@"SubtitleList"];
2381 [subtitlesArray autorelease];
2383 /* Now we go ahead and set the "job->values in the plist for passing right to fQueueEncodeLibhb */
2385 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcChapterStartPopUp indexOfSelectedItem] + 1] forKey:@"JobChapterStart"];
2387 [queueFileJob setObject:[NSNumber numberWithInt:[fSrcChapterEndPopUp indexOfSelectedItem] + 1] forKey:@"JobChapterEnd"];
2390 [queueFileJob setObject:[NSNumber numberWithInt:[[fDstFormatPopUp selectedItem] tag]] forKey:@"JobFileFormatMux"];
2394 [queueFileJob setObject:[NSNumber numberWithInt:[[fVidEncoderPopUp selectedItem] tag]] forKey:@"JobVideoEncoderVcodec"];
2397 [queueFileJob setObject:[NSNumber numberWithInt:[fVidRatePopUp indexOfSelectedItem]] forKey:@"JobIndexVideoFramerate"];
2398 [queueFileJob setObject:[NSNumber numberWithInt:title->rate] forKey:@"JobVrate"];
2399 [queueFileJob setObject:[NSNumber numberWithInt:title->rate_base] forKey:@"JobVrateBase"];
2401 /* Picture Sizing */
2402 /* Use Max Picture settings for whatever the dvd is.*/
2403 [queueFileJob setObject:[NSNumber numberWithInt:0] forKey:@"UsesMaxPictureSettings"];
2404 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->width] forKey:@"PictureWidth"];
2405 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->height] forKey:@"PictureHeight"];
2406 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->keep_ratio] forKey:@"PictureKeepRatio"];
2407 [queueFileJob setObject:[NSNumber numberWithInt:fTitle->job->anamorphic.mode] forKey:@"PicturePAR"];
2409 /* Set crop settings here */
2410 [queueFileJob setObject:[NSNumber numberWithInt:[fPictureController autoCrop]] forKey:@"PictureAutoCrop"];
2411 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[0]] forKey:@"PictureTopCrop"];
2412 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[1]] forKey:@"PictureBottomCrop"];
2413 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[2]] forKey:@"PictureLeftCrop"];
2414 [queueFileJob setObject:[NSNumber numberWithInt:job->crop[3]] forKey:@"PictureRightCrop"];
2418 /* we need to auto relase the queueFileJob and return it */
2419 [queueFileJob autorelease];
2420 return queueFileJob;
2424 /* this is actually called from the queue controller to modify the queue array and return it back to the queue controller */
2425 - (void)moveObjectsInQueueArray:(NSMutableArray *)array fromIndexes:(NSIndexSet *)indexSet toIndex:(NSUInteger)insertIndex
2427 NSUInteger index = [indexSet lastIndex];
2428 NSUInteger aboveInsertIndexCount = 0;
2431 NSUInteger removeIndex;
2433 if (index >= insertIndex)
2435 removeIndex = index + aboveInsertIndexCount;
2436 aboveInsertIndexCount++;
2440 removeIndex = index;
2444 id object = [[QueueFileArray objectAtIndex:removeIndex] retain];
2445 [QueueFileArray removeObjectAtIndex:removeIndex];
2446 [QueueFileArray insertObject:object atIndex:insertIndex];
2449 index = [indexSet indexLessThanIndex:index];
2451 /* We save all of the Queue data here
2452 * and it also gets sent back to the queue controller*/
2453 [self saveQueueFileItem];
2459 #pragma mark Queue Job Processing
2461 - (void) incrementQueueItemDone:(int) queueItemDoneIndexNum
2463 /* Mark the encode just finished as done (status 0)*/
2464 [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] setObject:[NSNumber numberWithInt:0] forKey:@"Status"];
2466 /* We save all of the Queue data here */
2467 [self saveQueueFileItem];
2469 /* Since we have now marked a queue item as done
2470 * we can go ahead and increment currentQueueEncodeIndex
2471 * so that if there is anything left in the queue we can
2472 * go ahead and move to the next item if we want to */
2473 int queueItems = [QueueFileArray count];
2474 /* Check to see if there are any more pending items in the queue */
2475 int newQueueItemIndex = [self getNextPendingQueueIndex];
2476 /* If we still have more pending items in our queue, lets go to the next one */
2477 if (newQueueItemIndex >= 0 && newQueueItemIndex < queueItems)
2479 /*Set our currentQueueEncodeIndex now to the newly found Pending encode as we own it */
2480 currentQueueEncodeIndex = newQueueItemIndex;
2481 /* now we mark the queue item as Status = 1 ( being encoded ) so another instance can not come along and try to scan it while we are scanning */
2482 [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] setObject:[NSNumber numberWithInt:1] forKey:@"Status"];
2483 [self writeToActivityLog: "incrementQueueItemDone new pending items found: %d", currentQueueEncodeIndex];
2484 [self saveQueueFileItem];
2485 /* now we can go ahead and scan the new pending queue item */
2486 [self performNewQueueScan:[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"SourcePath"] scanTitleNum:[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"TitleNumber"]intValue]];
2491 [self writeToActivityLog: "incrementQueueItemDone there are no more pending encodes"];
2492 /*Since there are no more items to encode, go to queueCompletedAlerts for user specified alerts after queue completed*/
2493 [self queueCompletedAlerts];
2497 /* Here we actually tell hb_scan to perform the source scan, using the path to source and title number*/
2498 - (void) performNewQueueScan:(NSString *) scanPath scanTitleNum: (int) scanTitleNum
2500 /* Tell HB to output a new activity log file for this encode */
2501 [outputPanel startEncodeLog:[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"DestinationPath"]];
2503 /* We now flag the queue item as being owned by this instance of HB using the PID */
2504 [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] setObject:[NSNumber numberWithInt:pidNum] forKey:@"EncodingPID"];
2505 /* Get the currentQueueEncodeNameString from the queue item to display in the status field */
2506 currentQueueEncodeNameString = [[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"DestinationPath"] lastPathComponent]retain];
2507 /* We save all of the Queue data here */
2508 [self saveQueueFileItem];
2510 /* use a bool to determine whether or not we can decrypt using vlc */
2511 BOOL cancelScanDecrypt = 0;
2512 /* set the bool so that showNewScan knows to apply the appropriate queue
2513 * settings as this is a queue rescan
2515 NSString *path = scanPath;
2516 HBDVDDetector *detector = [HBDVDDetector detectorForPath:path];
2518 if( [detector isVideoDVD] )
2520 // The chosen path was actually on a DVD, so use the raw block
2521 // device path instead.
2522 path = [detector devicePath];
2523 [self writeToActivityLog: "trying to open a physical dvd at: %s", [scanPath UTF8String]];
2525 /* lets check for vlc here to make sure we have a dylib available to use for decrypting */
2526 void *dvdcss = dlopen("libdvdcss.2.dylib", RTLD_LAZY);
2529 /*vlc not found in /Applications so we set the bool to cancel scanning to 1 */
2530 cancelScanDecrypt = 1;
2531 [self writeToActivityLog: "VLC app not found for decrypting physical dvd"];
2533 status = NSRunAlertPanel(@"HandBrake could not find VLC.",@"Please download and install VLC media player in your /Applications folder if you wish to read encrypted DVDs.", @"Get VLC", @"Cancel Scan", @"Attempt Scan Anyway");
2534 [NSApp requestUserAttention:NSCriticalRequest];
2536 if (status == NSAlertDefaultReturn)
2538 /* User chose to go download vlc (as they rightfully should) so we send them to the vlc site */
2539 [[NSWorkspace sharedWorkspace] openURL:[NSURL URLWithString:@"http://www.videolan.org/"]];
2541 else if (status == NSAlertAlternateReturn)
2543 /* User chose to cancel the scan */
2544 [self writeToActivityLog: "cannot open physical dvd , scan cancelled"];
2548 /* User chose to override our warning and scan the physical dvd anyway, at their own peril. on an encrypted dvd this produces massive log files and fails */
2549 cancelScanDecrypt = 0;
2550 [self writeToActivityLog: "user overrode vlc warning -trying to open physical dvd without decryption"];
2556 /* VLC was found in /Applications so all is well, we can carry on using vlc's libdvdcss.dylib for decrypting if needed */
2558 [self writeToActivityLog: "VLC app found for decrypting physical dvd"];
2562 if (cancelScanDecrypt == 0)
2564 /* we actually pass the scan off to libhb here */
2565 /* If there is no title number passed to scan, we use "0"
2566 * which causes the default behavior of a full source scan
2572 if (scanTitleNum > 0)
2574 [self writeToActivityLog: "scanning specifically for title: %d", scanTitleNum];
2577 /* We use our advance pref to determine how many previews to scan */
2578 int hb_num_previews = [[[NSUserDefaults standardUserDefaults] objectForKey:@"PreviewsNumber"] intValue];
2579 hb_scan( fQueueEncodeLibhb, [path UTF8String], scanTitleNum, hb_num_previews, 0 , 0 );
2583 /* This assumes that we have re-scanned and loaded up a new queue item to send to libhb as fQueueEncodeLibhb */
2584 - (void) processNewQueueEncode
2586 hb_list_t * list = hb_get_titles( fQueueEncodeLibhb );
2587 hb_title_t * title = (hb_title_t *) hb_list_item( list,0 ); // is always zero since now its a single title scan
2588 hb_job_t * job = title->job;
2590 if( !hb_list_count( list ) )
2592 [self writeToActivityLog: "processNewQueueEncode WARNING nothing found in the title list"];
2595 NSMutableDictionary * queueToApply = [QueueFileArray objectAtIndex:currentQueueEncodeIndex];
2596 [self writeToActivityLog: "Preset: %s", [[queueToApply objectForKey:@"PresetName"] UTF8String]];
2597 [self writeToActivityLog: "processNewQueueEncode number of passes expected is: %d", ([[queueToApply objectForKey:@"VideoTwoPass"] intValue] + 1)];
2598 job->file = [[queueToApply objectForKey:@"DestinationPath"] UTF8String];
2602 * If scanning we need to do some extra setup of the job.
2604 if( job->indepth_scan == 1 )
2609 * When subtitle scan is enabled do a fast pre-scan job
2610 * which will determine which subtitles to enable, if any.
2613 x264opts_tmp = job->x264opts;
2615 job->x264opts = NULL;
2617 job->indepth_scan = 1;
2621 * Add the pre-scan job
2623 hb_add( fQueueEncodeLibhb, job );
2624 job->x264opts = x264opts_tmp;
2628 if( [[queueToApply objectForKey:@"VideoTwoPass"] intValue] == 1 )
2630 job->indepth_scan = 0;
2636 hb_add( fQueueEncodeLibhb, job );
2640 job->x264opts = (char *)calloc(1024, 1); /* Fixme, this just leaks */
2641 strcpy(job->x264opts, [[queueToApply objectForKey:@"x264Option"] UTF8String]);
2643 hb_add( fQueueEncodeLibhb, job );
2648 job->indepth_scan = 0;
2651 hb_add( fQueueEncodeLibhb, job );
2654 NSString *destinationDirectory = [[queueToApply objectForKey:@"DestinationPath"] stringByDeletingLastPathComponent];
2655 [[NSUserDefaults standardUserDefaults] setObject:destinationDirectory forKey:@"LastDestinationDirectory"];
2656 /* Lets mark our new encode as 1 or "Encoding" */
2657 [queueToApply setObject:[NSNumber numberWithInt:1] forKey:@"Status"];
2658 [self saveQueueFileItem];
2660 /* we need to clean up the subtitle tracks after the job(s) have been set */
2661 int num_subtitle_tracks = hb_list_count(job->list_subtitle);
2663 for(ii = 0; ii < num_subtitle_tracks; ii++)
2665 hb_subtitle_t * subtitle;
2666 subtitle = (hb_subtitle_t *)hb_list_item(job->list_subtitle, 0);
2669 hb_list_rem(job->list_subtitle, subtitle);
2673 /* We should be all setup so let 'er rip */
2678 #pragma mark Queue Item Editing
2680 /* Rescans the chosen queue item back into the main window */
2681 - (void)rescanQueueItemToMainWindow:(NSString *) scanPath scanTitleNum: (int) scanTitleNum selectedQueueItem: (int) selectedQueueItem
2683 fqueueEditRescanItemNum = selectedQueueItem;
2684 [self writeToActivityLog: "rescanQueueItemToMainWindow: Re-scanning queue item at index:%d",fqueueEditRescanItemNum];
2685 applyQueueToScan = YES;
2686 /* Set the browsedSourceDisplayName for showNewScan */
2687 browsedSourceDisplayName = [[QueueFileArray objectAtIndex:fqueueEditRescanItemNum] objectForKey:@"SourceName"];
2688 [self performScan:scanPath scanTitleNum:scanTitleNum];
2692 /* We use this method after a queue item rescan for edit.
2693 * it largely mirrors -selectPreset in terms of structure.
2694 * Assumes that a queue item has been reloaded into the main window.
2696 - (IBAction)applyQueueSettingsToMainWindow:(id)sender
2698 NSMutableDictionary * queueToApply = [QueueFileArray objectAtIndex:fqueueEditRescanItemNum];
2699 hb_job_t * job = fTitle->job;
2702 [self writeToActivityLog: "applyQueueSettingsToMainWindow: queue item found"];
2704 /* Set title number and chapters */
2705 /* since the queue only scans a single title, its already been selected in showNewScan
2706 so do not try to reset it here. However if we do decide to do full source scans on
2707 a queue edit rescan, we would need it. So leaving in for now but commenting out. */
2708 //[fSrcTitlePopUp selectItemAtIndex: [[queueToApply objectForKey:@"TitleNumber"] intValue] - 1];
2710 [fSrcChapterStartPopUp selectItemAtIndex: [[queueToApply objectForKey:@"ChapterStart"] intValue] - 1];
2711 [fSrcChapterEndPopUp selectItemAtIndex: [[queueToApply objectForKey:@"ChapterEnd"] intValue] - 1];
2714 [fDstFormatPopUp selectItemWithTitle:[queueToApply objectForKey:@"FileFormat"]];
2715 [self formatPopUpChanged:nil];
2717 /* Chapter Markers*/
2718 [fCreateChapterMarkers setState:[[queueToApply objectForKey:@"ChapterMarkers"] intValue]];
2719 /* Allow Mpeg4 64 bit formatting +4GB file sizes */
2720 [fDstMp4LargeFileCheck setState:[[queueToApply objectForKey:@"Mp4LargeFile"] intValue]];
2721 /* Mux mp4 with http optimization */
2722 [fDstMp4HttpOptFileCheck setState:[[queueToApply objectForKey:@"Mp4HttpOptimize"] intValue]];
2725 /* We set the advanced opt string here if applicable*/
2726 [fVidEncoderPopUp selectItemWithTitle:[queueToApply objectForKey:@"VideoEncoder"]];
2727 [fAdvancedOptions setOptions:[queueToApply objectForKey:@"x264Option"]];
2729 /* Lets run through the following functions to get variables set there */
2730 [self videoEncoderPopUpChanged:nil];
2731 /* Set the state of ipod compatible with Mp4iPodCompatible. Only for x264*/
2732 [fDstMp4iPodFileCheck setState:[[queueToApply objectForKey:@"Mp4iPodCompatible"] intValue]];
2733 [self calculateBitrate:nil];
2736 [fVidQualityMatrix selectCellAtRow:[[queueToApply objectForKey:@"VideoQualityType"] intValue] column:0];
2738 [fVidTargetSizeField setStringValue:[queueToApply objectForKey:@"VideoTargetSize"]];
2739 [fVidBitrateField setStringValue:[queueToApply objectForKey:@"VideoAvgBitrate"]];
2740 /* Since we are now using RF Values for the slider, we detect if the preset uses an old quality float.
2741 * So, check to see if the quality value is less than 1.0 which should indicate the old ".062" type
2742 * quality preset. Caveat: in the case of x264, where the RF scale starts at 0, it would misinterpret
2743 * a preset that uses 0.0 - 0.99 for RF as an old style preset. Not sure how to get around that one yet,
2744 * though it should be a corner case since it would pretty much be a preset for lossless encoding. */
2745 if ([[queueToApply objectForKey:@"VideoQualitySlider"] floatValue] < 1.0)
2747 /* For the quality slider we need to convert the old percent's to the new rf scales */
2748 float rf = (([fVidQualitySlider maxValue] - [fVidQualitySlider minValue]) * [[queueToApply objectForKey:@"VideoQualitySlider"] floatValue]);
2749 [fVidQualitySlider setFloatValue:rf];
2754 /* Since theora's qp value goes up from left to right, we can just set the slider float value */
2755 if ([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_THEORA)
2757 [fVidQualitySlider setFloatValue:[[queueToApply objectForKey:@"VideoQualitySlider"] floatValue]];
2761 /* since ffmpeg and x264 use an "inverted" slider (lower qp/rf values indicate a higher quality) we invert the value on the slider */
2762 [fVidQualitySlider setFloatValue:([fVidQualitySlider maxValue] + [fVidQualitySlider minValue]) - [[queueToApply objectForKey:@"VideoQualitySlider"] floatValue]];
2766 [self videoMatrixChanged:nil];
2768 /* Video framerate */
2769 /* For video preset video framerate, we want to make sure that Same as source does not conflict with the
2770 detected framerate in the fVidRatePopUp so we use index 0*/
2771 if ([[queueToApply objectForKey:@"VideoFramerate"] isEqualToString:@"Same as source"])
2773 [fVidRatePopUp selectItemAtIndex: 0];
2777 [fVidRatePopUp selectItemWithTitle:[queueToApply objectForKey:@"VideoFramerate"]];
2780 /* 2 Pass Encoding */
2781 [fVidTwoPassCheck setState:[[queueToApply objectForKey:@"VideoTwoPass"] intValue]];
2782 [self twoPassCheckboxChanged:nil];
2783 /* Turbo 1st pass for 2 Pass Encoding */
2784 [fVidTurboPassCheck setState:[[queueToApply objectForKey:@"VideoTurboTwoPass"] intValue]];
2789 /* Now lets add our new tracks to the audio list here */
2790 [fAudioDelegate addTracksFromQueue: queueToApply];
2793 /* Crashy crashy right now, working on it */
2794 [fSubtitlesDelegate setNewSubtitles:[queueToApply objectForKey:@"SubtitleList"]];
2795 [fSubtitlesTable reloadData];
2796 /* Picture Settings */
2798 /* If Cropping is set to custom, then recall all four crop values from
2799 when the preset was created and apply them */
2800 if ([[queueToApply objectForKey:@"PictureAutoCrop"] intValue] == 0)
2802 [fPictureController setAutoCrop:NO];
2804 /* Here we use the custom crop values saved at the time the preset was saved */
2805 job->crop[0] = [[queueToApply objectForKey:@"PictureTopCrop"] intValue];
2806 job->crop[1] = [[queueToApply objectForKey:@"PictureBottomCrop"] intValue];
2807 job->crop[2] = [[queueToApply objectForKey:@"PictureLeftCrop"] intValue];
2808 job->crop[3] = [[queueToApply objectForKey:@"PictureRightCrop"] intValue];
2811 else /* if auto crop has been saved in preset, set to auto and use post scan auto crop */
2813 [fPictureController setAutoCrop:YES];
2814 /* Here we use the auto crop values determined right after scan */
2815 job->crop[0] = AutoCropTop;
2816 job->crop[1] = AutoCropBottom;
2817 job->crop[2] = AutoCropLeft;
2818 job->crop[3] = AutoCropRight;
2822 job->modulus = [[queueToApply objectForKey:@"PictureModulus"] intValue];
2824 /* we check to make sure the presets width/height does not exceed the sources width/height */
2825 if (fTitle->width < [[queueToApply objectForKey:@"PictureWidth"] intValue] || fTitle->height < [[queueToApply objectForKey:@"PictureHeight"] intValue])
2827 /* if so, then we use the sources height and width to avoid scaling up */
2828 //job->width = fTitle->width;
2829 //job->height = fTitle->height;
2830 [self revertPictureSizeToMax:nil];
2832 else // source width/height is >= the preset height/width
2834 /* we can go ahead and use the presets values for height and width */
2835 job->width = [[queueToApply objectForKey:@"PictureWidth"] intValue];
2836 job->height = [[queueToApply objectForKey:@"PictureHeight"] intValue];
2838 job->keep_ratio = [[queueToApply objectForKey:@"PictureKeepRatio"] intValue];
2839 if (job->keep_ratio == 1)
2841 hb_fix_aspect( job, HB_KEEP_WIDTH );
2842 if( job->height > fTitle->height )
2844 job->height = fTitle->height;
2845 hb_fix_aspect( job, HB_KEEP_HEIGHT );
2848 job->anamorphic.mode = [[queueToApply objectForKey:@"PicturePAR"] intValue];
2849 job->modulus = [[queueToApply objectForKey:@"PictureModulus"] intValue];
2853 /* We only allow *either* Decomb or Deinterlace. So check for the PictureDecombDeinterlace key.
2854 * also, older presets may not have this key, in which case we also check to see if that preset had PictureDecomb
2855 * specified, in which case we use decomb and ignore any possible Deinterlace settings as using both was less than
2858 [fPictureController setUseDecomb:1];
2859 [fPictureController setDecomb:0];
2860 [fPictureController setDeinterlace:0];
2861 if ([[queueToApply objectForKey:@"PictureDecombDeinterlace"] intValue] == 1 || [[queueToApply objectForKey:@"PictureDecomb"] intValue] > 0)
2863 /* we are using decomb */
2865 if ([[queueToApply objectForKey:@"PictureDecomb"] intValue] > 0)
2867 [fPictureController setDecomb:[[queueToApply objectForKey:@"PictureDecomb"] intValue]];
2869 /* if we are using "Custom" in the decomb setting, also set the custom string*/
2870 if ([[queueToApply objectForKey:@"PictureDecomb"] intValue] == 1)
2872 [fPictureController setDecombCustomString:[queueToApply objectForKey:@"PictureDecombCustom"]];
2878 /* We are using Deinterlace */
2880 if ([[queueToApply objectForKey:@"PictureDeinterlace"] intValue] > 0)
2882 [fPictureController setUseDecomb:0];
2883 [fPictureController setDeinterlace:[[queueToApply objectForKey:@"PictureDeinterlace"] intValue]];
2884 /* if we are using "Custom" in the deinterlace setting, also set the custom string*/
2885 if ([[queueToApply objectForKey:@"PictureDeinterlace"] intValue] == 1)
2887 [fPictureController setDeinterlaceCustomString:[queueToApply objectForKey:@"PictureDeinterlaceCustom"]];
2894 if ([[queueToApply objectForKey:@"PictureDetelecine"] intValue] > 0)
2896 [fPictureController setDetelecine:[[queueToApply objectForKey:@"PictureDetelecine"] intValue]];
2897 /* if we are using "Custom" in the detelecine setting, also set the custom string*/
2898 if ([[queueToApply objectForKey:@"PictureDetelecine"] intValue] == 1)
2900 [fPictureController setDetelecineCustomString:[queueToApply objectForKey:@"PictureDetelecineCustom"]];
2905 [fPictureController setDetelecine:0];
2909 if ([[queueToApply objectForKey:@"PictureDenoise"] intValue] > 0)
2911 [fPictureController setDenoise:[[queueToApply objectForKey:@"PictureDenoise"] intValue]];
2912 /* if we are using "Custom" in the denoise setting, also set the custom string*/
2913 if ([[queueToApply objectForKey:@"PictureDenoise"] intValue] == 1)
2915 [fPictureController setDenoiseCustomString:[queueToApply objectForKey:@"PictureDenoiseCustom"]];
2920 [fPictureController setDenoise:0];
2924 if ([[queueToApply objectForKey:@"PictureDeblock"] intValue] == 1)
2926 /* if its a one, then its the old on/off deblock, set on to 5*/
2927 [fPictureController setDeblock:5];
2931 /* use the settings intValue */
2932 [fPictureController setDeblock:[[queueToApply objectForKey:@"PictureDeblock"] intValue]];
2935 if ([[queueToApply objectForKey:@"VideoGrayScale"] intValue] == 1)
2937 [fPictureController setGrayscale:1];
2941 [fPictureController setGrayscale:0];
2944 /* we call SetTitle: in fPictureController so we get an instant update in the Picture Settings window */
2945 [fPictureController SetTitle:fTitle];
2946 [self calculatePictureSizing:nil];
2948 /* somehow we need to figure out a way to tie the queue item to a preset if it used one */
2949 //[queueFileJob setObject:[fPresetSelectedDisplay stringValue] forKey:@"PresetName"];
2950 //[queueFileJob setObject:[NSNumber numberWithInt:[fPresetsOutlineView selectedRow]] forKey:@"PresetIndexNum"];
2951 if ([queueToApply objectForKey:@"PresetIndexNum"]) // This item used a preset so insert that info
2953 /* Deselect the currently selected Preset if there is one*/
2954 //[fPresetsOutlineView selectRowIndexes:[NSIndexSet indexSetWithIndex:[[queueToApply objectForKey:@"PresetIndexNum"] intValue]] byExtendingSelection:NO];
2955 //[self selectPreset:nil];
2957 //[fPresetsOutlineView selectRow:[[queueToApply objectForKey:@"PresetIndexNum"] intValue]];
2958 /* Change UI to show "Custom" settings are being used */
2959 //[fPresetSelectedDisplay setStringValue: [[queueToApply objectForKey:@"PresetName"] stringValue]];
2961 curUserPresetChosenNum = nil;
2965 /* Deselect the currently selected Preset if there is one*/
2966 [fPresetsOutlineView deselectRow:[fPresetsOutlineView selectedRow]];
2967 /* Change UI to show "Custom" settings are being used */
2968 [fPresetSelectedDisplay setStringValue: @"Custom"];
2970 //curUserPresetChosenNum = nil;
2973 /* We need to set this bool back to NO, in case the user wants to do a scan */
2974 //applyQueueToScan = NO;
2976 /* Not that source is loaded and settings applied, delete the queue item from the queue */
2977 [self writeToActivityLog: "applyQueueSettingsToMainWindow: deleting queue item:%d",fqueueEditRescanItemNum];
2978 [self removeQueueFileItem:fqueueEditRescanItemNum];
2984 #pragma mark Live Preview
2985 /* Note,this is much like prepareJob, but directly sets the job vars so Picture Preview
2986 * can encode to its temp preview directory and playback. This is *not* used for any actual user
2989 - (void) prepareJobForPreview
2991 hb_list_t * list = hb_get_titles( fHandle );
2992 hb_title_t * title = (hb_title_t *) hb_list_item( list,
2993 [fSrcTitlePopUp indexOfSelectedItem] );
2994 hb_job_t * job = title->job;
2995 hb_audio_config_t * audio;
2996 /* set job->angle for libdvdnav */
2997 job->angle = [fSrcAnglePopUp indexOfSelectedItem] + 1;
2998 /* Chapter selection */
2999 job->chapter_start = [fSrcChapterStartPopUp indexOfSelectedItem] + 1;
3000 job->chapter_end = [fSrcChapterEndPopUp indexOfSelectedItem] + 1;
3002 /* Format (Muxer) and Video Encoder */
3003 job->mux = [[fDstFormatPopUp selectedItem] tag];
3004 job->vcodec = [[fVidEncoderPopUp selectedItem] tag];
3006 job->chapter_markers = 0;
3008 if( job->vcodec & HB_VCODEC_X264 )
3011 /* Below Sends x264 options to the core library if x264 is selected*/
3012 /* Lets use this as per Nyx, Thanks Nyx!*/
3013 job->x264opts = (char *)calloc(1024, 1); /* Fixme, this just leaks */
3014 /* For previews we ignore the turbo option for the first pass of two since we only use 1 pass */
3015 strcpy(job->x264opts, [[fAdvancedOptions optionsString] UTF8String]);
3020 /* Video settings */
3021 /* Set vfr to 0 as it's only on if using same as source in the framerate popup
3022 * and detelecine is on, so we handle that in the logic below
3025 if( [fVidRatePopUp indexOfSelectedItem] > 0 )
3027 /* a specific framerate has been chosen */
3028 job->vrate = 27000000;
3029 job->vrate_base = hb_video_rates[[fVidRatePopUp indexOfSelectedItem]-1].rate;
3030 /* We are not same as source so we set job->cfr to 1
3031 * to enable constant frame rate since user has specified
3032 * a specific framerate*/
3033 if ([fFrameratePfrCheck state] == 1)
3044 /* We are same as source (variable) */
3045 job->vrate = title->rate;
3046 job->vrate_base = title->rate_base;
3047 /* We are same as source so we set job->cfr to 0
3048 * to enable true same as source framerate */
3050 /* If we are same as source and we have detelecine on, we need to turn on
3053 if ([fPictureController detelecine] == 1)
3059 switch( [fVidQualityMatrix selectedRow] )
3063 Bitrate should already have been calculated and displayed
3064 in fVidBitrateField, so let's just use it */
3066 job->vquality = -1.0;
3067 job->vbitrate = [fVidBitrateField intValue];
3070 job->vquality = [fVidQualityRFField floatValue];
3075 /* Subtitle settings */
3076 NSMutableArray *subtitlesArray = [[NSMutableArray alloc] initWithArray:[fSubtitlesDelegate getSubtitleArray] copyItems:YES];
3083 bool one_burned = FALSE;
3086 NSEnumerator *enumerator = [subtitlesArray objectEnumerator];
3088 while (tempObject = [enumerator nextObject])
3091 subtitle = [[tempObject objectForKey:@"subtitleSourceTrackNum"] intValue];
3092 force = [[tempObject objectForKey:@"subtitleTrackForced"] intValue];
3093 burned = [[tempObject objectForKey:@"subtitleTrackBurned"] intValue];
3094 def = [[tempObject objectForKey:@"subtitleTrackDefault"] intValue];
3096 /* since the subtitleSourceTrackNum 0 is "None" in our array of the subtitle popups,
3097 * we want to ignore it for display as well as encoding.
3101 /* if i is 0, then we are in the first item of the subtitles which we need to
3102 * check for the "Foreign Audio Search" which would be subtitleSourceTrackNum of 1
3103 * bearing in mind that for all tracks subtitleSourceTrackNum of 0 is None.
3106 /* if we are on the first track and using "Foreign Audio Search" */
3107 if (i == 0 && subtitle == 1)
3109 /* NOTE: Currently foreign language search is borked for preview.
3110 * Commented out but left in for initial commit. */
3113 [self writeToActivityLog: "Foreign Language Search: %d", 1];
3115 job->indepth_scan = 1;
3119 job->select_subtitle_config.dest = PASSTHRUSUB;
3123 job->select_subtitle_config.dest = RENDERSUB;
3126 job->select_subtitle_config.force = force;
3127 job->select_subtitle_config.default_track = def;
3132 /* for the actual source tracks, we must subtract the non source entries so
3133 * that the menu index matches the source subtitle_list index for convenience */
3136 /* for the first track, the source tracks start at menu index 2 ( None is 0,
3137 * Foreign Language Search is 1) so subtract 2 */
3138 subtitle = subtitle - 2;
3142 /* for all other tracks, the source tracks start at menu index 1 (None is 0)
3145 subtitle = subtitle - 1;
3148 /* We are setting a source subtitle so access the source subtitle info */
3149 hb_subtitle_t * subt;
3151 subt = (hb_subtitle_t *)hb_list_item(title->list_subtitle, subtitle);
3153 /* if we are getting the subtitles from an external srt file */
3154 if ([[tempObject objectForKey:@"subtitleSourceTrackType"] isEqualToString:@"SRT"])
3156 hb_subtitle_config_t sub_config;
3158 sub_config.offset = [[tempObject objectForKey:@"subtitleTrackSrtOffset"] intValue];
3160 /* we need to srncpy file path and char code */
3161 strncpy(sub_config.src_filename, [[tempObject objectForKey:@"subtitleSourceSrtFilePath"] UTF8String], 128);
3162 strncpy(sub_config.src_codeset, [[tempObject objectForKey:@"subtitleTrackSrtCharCode"] UTF8String], 40);
3164 sub_config.force = 0;
3165 sub_config.dest = PASSTHRUSUB;
3166 sub_config.default_track = def;
3168 hb_srt_add( job, &sub_config, [[tempObject objectForKey:@"subtitleTrackSrtLanguageIso3"] UTF8String]);
3173 hb_subtitle_config_t sub_config = subt->config;
3175 if ( !burned && subt->format == PICTURESUB )
3177 sub_config.dest = PASSTHRUSUB;
3179 else if ( burned && subt->format == PICTURESUB )
3181 // Only allow one subtitle to be burned into the video
3186 sub_config.force = force;
3187 sub_config.default_track = def;
3188 hb_subtitle_add( job, &sub_config, subtitle );
3198 [subtitlesArray autorelease];
3201 /* Audio tracks and mixdowns */
3202 [fAudioDelegate prepareAudioForJob: job];
3208 /* Though Grayscale is not really a filter, per se
3209 * we put it here since its in the filters panel
3212 if ([fPictureController grayscale])
3221 /* Initialize the filters list */
3222 job->filters = hb_list_init();
3224 /* Now lets call the filters if applicable.
3225 * The order of the filters is critical
3229 hb_filter_detelecine.settings = NULL;
3230 if ([fPictureController detelecine] == 1)
3232 /* use a custom detelecine string */
3233 hb_filter_detelecine.settings = (char *) [[fPictureController detelecineCustomString] UTF8String];
3234 hb_list_add( job->filters, &hb_filter_detelecine );
3236 if ([fPictureController detelecine] == 2)
3239 hb_list_add( job->filters, &hb_filter_detelecine );
3244 if ([fPictureController useDecomb] == 1)
3247 /* we add the custom string if present */
3248 hb_filter_decomb.settings = NULL;
3249 if ([fPictureController decomb] == 1)
3251 /* use a custom decomb string */
3252 hb_filter_decomb.settings = (char *) [[fPictureController decombCustomString] UTF8String];
3253 hb_list_add( job->filters, &hb_filter_decomb );
3255 if ([fPictureController decomb] == 2)
3257 /* Run old deinterlacer fd by default */
3258 //hb_filter_decomb.settings = (char *) [[fPicSettingDecomb stringValue] UTF8String];
3259 hb_list_add( job->filters, &hb_filter_decomb );
3266 if ([fPictureController deinterlace] == 1)
3268 /* we add the custom string if present */
3269 hb_filter_deinterlace.settings = (char *) [[fPictureController deinterlaceCustomString] UTF8String];
3270 hb_list_add( job->filters, &hb_filter_deinterlace );
3272 else if ([fPictureController deinterlace] == 2)
3274 /* Run old deinterlacer fd by default */
3275 hb_filter_deinterlace.settings = "-1";
3276 hb_list_add( job->filters, &hb_filter_deinterlace );
3278 else if ([fPictureController deinterlace] == 3)
3280 /* Yadif mode 0 (without spatial deinterlacing.) */
3281 hb_filter_deinterlace.settings = "2";
3282 hb_list_add( job->filters, &hb_filter_deinterlace );
3284 else if ([fPictureController deinterlace] == 4)
3286 /* Yadif (with spatial deinterlacing) */
3287 hb_filter_deinterlace.settings = "0";
3288 hb_list_add( job->filters, &hb_filter_deinterlace );
3294 if ([fPictureController denoise] == 1) // custom in popup
3296 /* we add the custom string if present */
3297 hb_filter_denoise.settings = (char *) [[fPictureController denoiseCustomString] UTF8String];
3298 hb_list_add( job->filters, &hb_filter_denoise );
3300 else if ([fPictureController denoise] == 2) // Weak in popup
3302 hb_filter_denoise.settings = "2:1:2:3";
3303 hb_list_add( job->filters, &hb_filter_denoise );
3305 else if ([fPictureController denoise] == 3) // Medium in popup
3307 hb_filter_denoise.settings = "3:2:2:3";
3308 hb_list_add( job->filters, &hb_filter_denoise );
3310 else if ([fPictureController denoise] == 4) // Strong in popup
3312 hb_filter_denoise.settings = "7:7:5:5";
3313 hb_list_add( job->filters, &hb_filter_denoise );
3317 /* Deblock (uses pp7 default) */
3318 /* NOTE: even though there is a valid deblock setting of 0 for the filter, for
3319 * the macgui's purposes a value of 0 actually means to not even use the filter
3320 * current hb_filter_deblock.settings valid ranges are from 5 - 15
3322 if ([fPictureController deblock] != 0)
3324 NSString *deblockStringValue = [NSString stringWithFormat: @"%d",[fPictureController deblock]];
3325 hb_filter_deblock.settings = (char *) [deblockStringValue UTF8String];
3326 hb_list_add( job->filters, &hb_filter_deblock );
3333 #pragma mark Job Handling
3339 NSMutableDictionary * queueToApply = [QueueFileArray objectAtIndex:currentQueueEncodeIndex];
3340 hb_list_t * list = hb_get_titles( fQueueEncodeLibhb );
3341 hb_title_t * title = (hb_title_t *) hb_list_item( list,0 ); // is always zero since now its a single title scan
3342 hb_job_t * job = title->job;
3343 hb_audio_config_t * audio;
3344 /* Title Angle for dvdnav */
3345 job->angle = [[queueToApply objectForKey:@"TitleAngle"] intValue];
3347 if([[queueToApply objectForKey:@"fEncodeStartStop"] intValue] == 0)
3349 /* Chapter selection */
3350 [self writeToActivityLog: "Start / Stop set to chapters"];
3351 job->chapter_start = [[queueToApply objectForKey:@"JobChapterStart"] intValue];
3352 job->chapter_end = [[queueToApply objectForKey:@"JobChapterEnd"] intValue];
3354 else if ([[queueToApply objectForKey:@"fEncodeStartStop"] intValue] == 1)
3356 /* we are pts based start / stop */
3357 [self writeToActivityLog: "Start / Stop set to seconds ..."];
3359 /* Point A to Point B. Time to time in seconds.*/
3360 /* get the start seconds from the start seconds field */
3361 int start_seconds = [[queueToApply objectForKey:@"StartSeconds"] intValue];
3362 job->pts_to_start = start_seconds * 90000LL;
3363 /* Stop seconds is actually the duration of encode, so subtract the end seconds from the start seconds */
3364 int stop_seconds = [[queueToApply objectForKey:@"StopSeconds"] intValue];
3365 job->pts_to_stop = stop_seconds * 90000LL;
3368 else if ([[queueToApply objectForKey:@"fEncodeStartStop"] intValue] == 2)
3370 /* we are frame based start / stop */
3371 [self writeToActivityLog: "Start / Stop set to frames ..."];
3373 /* Point A to Point B. Frame to frame */
3374 /* get the start frame from the start frame field */
3375 int start_frame = [[queueToApply objectForKey:@"StartFrame"] intValue];
3376 job->frame_to_start = start_frame;
3377 /* get the frame to stop on from the end frame field */
3378 int stop_frame = [[queueToApply objectForKey:@"StopFrame"] intValue];
3379 job->frame_to_stop = stop_frame;
3386 /* Format (Muxer) and Video Encoder */
3387 job->mux = [[queueToApply objectForKey:@"JobFileFormatMux"] intValue];
3388 job->vcodec = [[queueToApply objectForKey:@"JobVideoEncoderVcodec"] intValue];
3391 /* If mpeg-4, then set mpeg-4 specific options like chapters and > 4gb file sizes */
3392 if( [[queueToApply objectForKey:@"Mp4LargeFile"] intValue] == 1)
3394 job->largeFileSize = 1;
3398 job->largeFileSize = 0;
3400 /* We set http optimized mp4 here */
3401 if( [[queueToApply objectForKey:@"Mp4HttpOptimize"] intValue] == 1 )
3403 job->mp4_optimize = 1;
3407 job->mp4_optimize = 0;
3411 /* We set the chapter marker extraction here based on the format being
3412 mpeg4 or mkv and the checkbox being checked */
3413 if ([[queueToApply objectForKey:@"ChapterMarkers"] intValue] == 1)
3415 job->chapter_markers = 1;
3417 /* now lets get our saved chapter names out the array in the queue file
3418 * and insert them back into the title chapter list. We have it here,
3419 * because unless we are inserting chapter markers there is no need to
3420 * spend the overhead of iterating through the chapter names array imo
3421 * Also, note that if for some reason we don't apply chapter names, the
3422 * chapters just come out 001, 002, etc. etc.
3425 NSMutableArray *ChapterNamesArray = [queueToApply objectForKey:@"ChapterNames"];
3427 NSEnumerator *enumerator = [ChapterNamesArray objectEnumerator];
3429 while (tempObject = [enumerator nextObject])
3431 hb_chapter_t *chapter = (hb_chapter_t *) hb_list_item( title->list_chapter, i );
3432 if( chapter != NULL )
3434 strncpy( chapter->title, [tempObject UTF8String], 1023);
3435 chapter->title[1023] = '\0';
3442 job->chapter_markers = 0;
3445 if( job->vcodec & HB_VCODEC_X264 )
3447 if ([[queueToApply objectForKey:@"Mp4iPodCompatible"] intValue] == 1)
3457 /* Below Sends x264 options to the core library if x264 is selected*/
3458 /* Lets use this as per Nyx, Thanks Nyx!*/
3459 job->x264opts = (char *)calloc(1024, 1); /* Fixme, this just leaks */
3460 /* Turbo first pass if two pass and Turbo First pass is selected */
3461 if( [[queueToApply objectForKey:@"VideoTwoPass"] intValue] == 1 && [[queueToApply objectForKey:@"VideoTurboTwoPass"] intValue] == 1 )
3463 /* pass the "Turbo" string to be appended to the existing x264 opts string into a variable for the first pass */
3464 NSString *firstPassOptStringTurbo = @":ref=1:subme=2:me=dia:analyse=none:trellis=0:no-fast-pskip=0:8x8dct=0:weightb=0";
3465 /* append the "Turbo" string variable to the existing opts string.
3466 Note: the "Turbo" string must be appended, not prepended to work properly*/
3467 NSString *firstPassOptStringCombined = [[queueToApply objectForKey:@"x264Option"] stringByAppendingString:firstPassOptStringTurbo];
3468 strcpy(job->x264opts, [firstPassOptStringCombined UTF8String]);
3472 strcpy(job->x264opts, [[queueToApply objectForKey:@"x264Option"] UTF8String]);
3478 /* Picture Size Settings */
3479 job->width = [[queueToApply objectForKey:@"PictureWidth"] intValue];
3480 job->height = [[queueToApply objectForKey:@"PictureHeight"] intValue];
3482 job->keep_ratio = [[queueToApply objectForKey:@"PictureKeepRatio"] intValue];
3483 job->anamorphic.mode = [[queueToApply objectForKey:@"PicturePAR"] intValue];
3484 job->modulus = [[queueToApply objectForKey:@"PictureModulus"] intValue];
3485 if ([[queueToApply objectForKey:@"PicturePAR"] intValue] == 3)
3487 /* insert our custom values here for capuj */
3488 job->width = [[queueToApply objectForKey:@"PicturePARStorageWidth"] intValue];
3489 job->height = [[queueToApply objectForKey:@"PicturePARStorageHeight"] intValue];
3491 job->modulus = [[queueToApply objectForKey:@"PicturePARModulus"] intValue];
3493 job->anamorphic.par_width = [[queueToApply objectForKey:@"PicturePARPixelWidth"] intValue];
3494 job->anamorphic.par_height = [[queueToApply objectForKey:@"PicturePARPixelHeight"] intValue];
3496 job->anamorphic.dar_width = [[queueToApply objectForKey:@"PicturePARDisplayWidth"] floatValue];
3497 job->anamorphic.dar_height = [[queueToApply objectForKey:@"PicturePARDisplayHeight"] floatValue];
3500 /* Here we use the crop values saved at the time the preset was saved */
3501 job->crop[0] = [[queueToApply objectForKey:@"PictureTopCrop"] intValue];
3502 job->crop[1] = [[queueToApply objectForKey:@"PictureBottomCrop"] intValue];
3503 job->crop[2] = [[queueToApply objectForKey:@"PictureLeftCrop"] intValue];
3504 job->crop[3] = [[queueToApply objectForKey:@"PictureRightCrop"] intValue];
3506 /* Video settings */
3509 /* Set vfr to 0 as it's only on if using same as source in the framerate popup
3510 * and detelecine is on, so we handle that in the logic below
3513 if( [[queueToApply objectForKey:@"JobIndexVideoFramerate"] intValue] > 0 )
3515 /* a specific framerate has been chosen */
3516 job->vrate = 27000000;
3517 job->vrate_base = hb_video_rates[[[queueToApply objectForKey:@"JobIndexVideoFramerate"] intValue]-1].rate;
3518 /* We are not same as source so we set job->cfr to 1
3519 * to enable constant frame rate since user has specified
3520 * a specific framerate*/
3522 if ([[queueToApply objectForKey:@"VideoFrameratePFR"] intValue] == 1)
3533 /* We are same as source (variable) */
3534 job->vrate = [[queueToApply objectForKey:@"JobVrate"] intValue];
3535 job->vrate_base = [[queueToApply objectForKey:@"JobVrateBase"] intValue];
3536 /* We are same as source so we set job->cfr to 0
3537 * to enable true same as source framerate */
3539 /* If we are same as source and we have detelecine on, we need to turn on
3542 if ([[queueToApply objectForKey:@"PictureDetelecine"] intValue] == 1)
3548 if ( [[queueToApply objectForKey:@"VideoQualityType"] intValue] != 2 )
3551 Bitrate should already have been calculated and displayed
3552 in fVidBitrateField, so let's just use it same as abr*/
3553 job->vquality = -1.0;
3554 job->vbitrate = [[queueToApply objectForKey:@"VideoAvgBitrate"] intValue];
3556 if ( [[queueToApply objectForKey:@"VideoQualityType"] intValue] == 2 )
3558 job->vquality = [[queueToApply objectForKey:@"VideoQualitySlider"] floatValue];
3563 job->grayscale = [[queueToApply objectForKey:@"VideoGrayScale"] intValue];
3568 #pragma mark Process Subtitles to libhb
3570 /* Map the settings in the dictionaries for the SubtitleList array to match title->list_subtitle
3571 * which means that we need to account for the offset of non source language settings in from
3572 * the NSPopUpCell menu. For all of the objects in the SubtitleList array this means 0 is "None"
3573 * from the popup menu, additionally the first track has "Foreign Audio Search" at 1. So we use
3574 * an int to offset the index number for the objectForKey:@"subtitleSourceTrackNum" to map that
3575 * to the source tracks position in title->list_subtitle.
3582 bool one_burned = FALSE;
3585 NSEnumerator *enumerator = [[queueToApply objectForKey:@"SubtitleList"] objectEnumerator];
3587 while (tempObject = [enumerator nextObject])
3590 subtitle = [[tempObject objectForKey:@"subtitleSourceTrackNum"] intValue];
3591 force = [[tempObject objectForKey:@"subtitleTrackForced"] intValue];
3592 burned = [[tempObject objectForKey:@"subtitleTrackBurned"] intValue];
3593 def = [[tempObject objectForKey:@"subtitleTrackDefault"] intValue];
3595 /* since the subtitleSourceTrackNum 0 is "None" in our array of the subtitle popups,
3596 * we want to ignore it for display as well as encoding.
3600 /* if i is 0, then we are in the first item of the subtitles which we need to
3601 * check for the "Foreign Audio Search" which would be subtitleSourceTrackNum of 1
3602 * bearing in mind that for all tracks subtitleSourceTrackNum of 0 is None.
3605 /* if we are on the first track and using "Foreign Audio Search" */
3606 if (i == 0 && subtitle == 1)
3608 [self writeToActivityLog: "Foreign Language Search: %d", 1];
3610 job->indepth_scan = 1;
3614 job->select_subtitle_config.dest = PASSTHRUSUB;
3618 job->select_subtitle_config.dest = RENDERSUB;
3621 job->select_subtitle_config.force = force;
3622 job->select_subtitle_config.default_track = def;
3627 /* for the actual source tracks, we must subtract the non source entries so
3628 * that the menu index matches the source subtitle_list index for convenience */
3631 /* for the first track, the source tracks start at menu index 2 ( None is 0,
3632 * Foreign Language Search is 1) so subtract 2 */
3633 subtitle = subtitle - 2;
3637 /* for all other tracks, the source tracks start at menu index 1 (None is 0)
3640 subtitle = subtitle - 1;
3643 /* We are setting a source subtitle so access the source subtitle info */
3644 hb_subtitle_t * subt;
3646 subt = (hb_subtitle_t *)hb_list_item(title->list_subtitle, subtitle);
3648 /* if we are getting the subtitles from an external srt file */
3649 if ([[tempObject objectForKey:@"subtitleSourceTrackType"] isEqualToString:@"SRT"])
3651 hb_subtitle_config_t sub_config;
3653 sub_config.offset = [[tempObject objectForKey:@"subtitleTrackSrtOffset"] intValue];
3655 /* we need to srncpy file name and codeset */
3656 strncpy(sub_config.src_filename, [[tempObject objectForKey:@"subtitleSourceSrtFilePath"] UTF8String], 128);
3657 strncpy(sub_config.src_codeset, [[tempObject objectForKey:@"subtitleTrackSrtCharCode"] UTF8String], 40);
3659 sub_config.force = 0;
3660 sub_config.dest = PASSTHRUSUB;
3661 sub_config.default_track = def;
3663 hb_srt_add( job, &sub_config, [[tempObject objectForKey:@"subtitleTrackSrtLanguageIso3"] UTF8String]);
3669 hb_subtitle_config_t sub_config = subt->config;
3671 if ( !burned && subt->format == PICTURESUB )
3673 sub_config.dest = PASSTHRUSUB;
3675 else if ( burned && subt->format == PICTURESUB )
3677 // Only allow one subtitle to be burned into the video
3682 sub_config.force = force;
3683 sub_config.default_track = def;
3684 hb_subtitle_add( job, &sub_config, subtitle );
3695 /* Audio tracks and mixdowns */
3696 /* Lets make sure there arent any erroneous audio tracks in the job list, so lets make sure its empty*/
3697 int audiotrack_count = hb_list_count(job->list_audio);
3698 for( int i = 0; i < audiotrack_count;i++)
3700 hb_audio_t * temp_audio = (hb_audio_t*) hb_list_item( job->list_audio, 0 );
3701 hb_list_rem(job->list_audio, temp_audio);
3703 /* Now lets add our new tracks to the audio list here */
3704 for (unsigned int counter = 0; counter < maximumNumberOfAllowedAudioTracks; counter++) {
3705 NSString *prefix = [NSString stringWithFormat: @"Audio%d", counter + 1];
3706 if ([[queueToApply objectForKey: [prefix stringByAppendingString: @"Track"]] intValue] > 0) {
3707 audio = (hb_audio_config_t *) calloc(1, sizeof(*audio));
3708 hb_audio_config_init(audio);
3709 audio->in.track = [[queueToApply objectForKey: [prefix stringByAppendingString: @"Track"]] intValue] - 1;
3710 /* We go ahead and assign values to our audio->out.<properties> */
3711 audio->out.track = audio->in.track;
3712 audio->out.dynamic_range_compression = [[queueToApply objectForKey: [prefix stringByAppendingString: @"TrackDRCSlider"]] floatValue];
3713 prefix = [NSString stringWithFormat: @"JobAudio%d", counter + 1];
3714 audio->out.codec = [[queueToApply objectForKey: [prefix stringByAppendingString: @"Encoder"]] intValue];
3715 audio->out.mixdown = [[queueToApply objectForKey: [prefix stringByAppendingString: @"Mixdown"]] intValue];
3716 audio->out.bitrate = [[queueToApply objectForKey: [prefix stringByAppendingString: @"Bitrate"]] intValue];
3717 audio->out.samplerate = [[queueToApply objectForKey: [prefix stringByAppendingString: @"Samplerate"]] intValue];
3719 hb_audio_add( job, audio );
3725 job->filters = hb_list_init();
3727 /* Now lets call the filters if applicable.
3728 * The order of the filters is critical
3731 hb_filter_detelecine.settings = NULL;
3732 if ([[queueToApply objectForKey:@"PictureDetelecine"] intValue] == 1)
3734 /* use a custom detelecine string */
3735 hb_filter_detelecine.settings = (char *) [[queueToApply objectForKey:@"PictureDetelecineCustom"] UTF8String];
3736 hb_list_add( job->filters, &hb_filter_detelecine );
3738 if ([[queueToApply objectForKey:@"PictureDetelecine"] intValue] == 2)
3740 /* Use libhb's default values */
3741 hb_list_add( job->filters, &hb_filter_detelecine );
3744 if ([[queueToApply objectForKey:@"PictureDecombDeinterlace"] intValue] == 1)
3747 /* we add the custom string if present */
3748 hb_filter_decomb.settings = NULL;
3749 if ([[queueToApply objectForKey:@"PictureDecomb"] intValue] == 1)
3751 /* use a custom decomb string */
3752 hb_filter_decomb.settings = (char *) [[queueToApply objectForKey:@"PictureDecombCustom"] UTF8String];
3753 hb_list_add( job->filters, &hb_filter_decomb );
3755 if ([[queueToApply objectForKey:@"PictureDecomb"] intValue] == 2)
3757 /* Use libhb default */
3758 hb_list_add( job->filters, &hb_filter_decomb );
3766 if ([[queueToApply objectForKey:@"PictureDeinterlace"] intValue] == 1)
3768 /* we add the custom string if present */
3769 hb_filter_deinterlace.settings = (char *) [[queueToApply objectForKey:@"PictureDeinterlaceCustom"] UTF8String];
3770 hb_list_add( job->filters, &hb_filter_deinterlace );
3772 else if ([[queueToApply objectForKey:@"PictureDeinterlace"] intValue] == 2)
3774 /* Run old deinterlacer fd by default */
3775 hb_filter_deinterlace.settings = "-1";
3776 hb_list_add( job->filters, &hb_filter_deinterlace );
3778 else if ([[queueToApply objectForKey:@"PictureDeinterlace"] intValue] == 3)
3780 /* Yadif mode 0 (without spatial deinterlacing.) */
3781 hb_filter_deinterlace.settings = "2";
3782 hb_list_add( job->filters, &hb_filter_deinterlace );
3784 else if ([[queueToApply objectForKey:@"PictureDeinterlace"] intValue] == 4)
3786 /* Yadif (with spatial deinterlacing) */
3787 hb_filter_deinterlace.settings = "0";
3788 hb_list_add( job->filters, &hb_filter_deinterlace );
3794 if ([[queueToApply objectForKey:@"PictureDenoise"] intValue] == 1) // Custom in popup
3796 /* we add the custom string if present */
3797 hb_filter_denoise.settings = (char *) [[queueToApply objectForKey:@"PictureDenoiseCustom"] UTF8String];
3798 hb_list_add( job->filters, &hb_filter_denoise );
3800 else if ([[queueToApply objectForKey:@"PictureDenoise"] intValue] == 2) // Weak in popup
3802 hb_filter_denoise.settings = "2:1:2:3";
3803 hb_list_add( job->filters, &hb_filter_denoise );
3805 else if ([[queueToApply objectForKey:@"PictureDenoise"] intValue] == 3) // Medium in popup
3807 hb_filter_denoise.settings = "3:2:2:3";
3808 hb_list_add( job->filters, &hb_filter_denoise );
3810 else if ([[queueToApply objectForKey:@"PictureDenoise"] intValue] == 4) // Strong in popup
3812 hb_filter_denoise.settings = "7:7:5:5";
3813 hb_list_add( job->filters, &hb_filter_denoise );
3817 /* Deblock (uses pp7 default) */
3818 /* NOTE: even though there is a valid deblock setting of 0 for the filter, for
3819 * the macgui's purposes a value of 0 actually means to not even use the filter
3820 * current hb_filter_deblock.settings valid ranges are from 5 - 15
3822 if ([[queueToApply objectForKey:@"PictureDeblock"] intValue] != 0)
3824 hb_filter_deblock.settings = (char *) [[queueToApply objectForKey:@"PictureDeblock"] UTF8String];
3825 hb_list_add( job->filters, &hb_filter_deblock );
3827 [self writeToActivityLog: "prepareJob exiting"];
3832 /* addToQueue: puts up an alert before ultimately calling doAddToQueue
3834 - (IBAction) addToQueue: (id) sender
3836 /* We get the destination directory from the destination field here */
3837 NSString *destinationDirectory = [[fDstFile2Field stringValue] stringByDeletingLastPathComponent];
3838 /* We check for a valid destination here */
3839 if ([[NSFileManager defaultManager] fileExistsAtPath:destinationDirectory] == 0)
3841 NSRunAlertPanel(@"Warning!", @"This is not a valid destination directory!", @"OK", nil, nil);
3848 BOOL fileExistsInQueue;
3849 fileExistsInQueue = NO;
3851 /* We check for and existing file here */
3852 if([[NSFileManager defaultManager] fileExistsAtPath: [fDstFile2Field stringValue]])
3857 /* We now run through the queue and make sure we are not overwriting an exisiting queue item */
3859 NSEnumerator *enumerator = [QueueFileArray objectEnumerator];
3861 while (tempObject = [enumerator nextObject])
3863 NSDictionary *thisQueueDict = tempObject;
3864 if ([[thisQueueDict objectForKey:@"DestinationPath"] isEqualToString: [fDstFile2Field stringValue]])
3866 fileExistsInQueue = YES;
3872 if(fileExists == YES)
3874 NSBeginCriticalAlertSheet( NSLocalizedString( @"File already exists.", @"" ),
3875 NSLocalizedString( @"Cancel", @"" ), NSLocalizedString( @"Overwrite", @"" ), nil, fWindow, self,
3876 @selector( overwriteAddToQueueAlertDone:returnCode:contextInfo: ),
3877 NULL, NULL, [NSString stringWithFormat:
3878 NSLocalizedString( @"Do you want to overwrite %@?", @"" ),
3879 [fDstFile2Field stringValue]] );
3881 else if (fileExistsInQueue == YES)
3883 NSBeginCriticalAlertSheet( NSLocalizedString( @"There is already a queue item for this destination.", @"" ),
3884 NSLocalizedString( @"Cancel", @"" ), NSLocalizedString( @"Overwrite", @"" ), nil, fWindow, self,
3885 @selector( overwriteAddToQueueAlertDone:returnCode:contextInfo: ),
3886 NULL, NULL, [NSString stringWithFormat:
3887 NSLocalizedString( @"Do you want to overwrite %@?", @"" ),
3888 [fDstFile2Field stringValue]] );
3892 [self doAddToQueue];
3896 /* overwriteAddToQueueAlertDone: called from the alert posted by addToQueue that asks
3897 the user if they want to overwrite an exiting movie file.
3899 - (void) overwriteAddToQueueAlertDone: (NSWindow *) sheet
3900 returnCode: (int) returnCode contextInfo: (void *) contextInfo
3902 if( returnCode == NSAlertAlternateReturn )
3903 [self doAddToQueue];
3906 - (void) doAddToQueue
3908 [self addQueueFileItem ];
3913 /* Rip: puts up an alert before ultimately calling doRip
3915 - (IBAction) Rip: (id) sender
3917 [self writeToActivityLog: "Rip: Pending queue count is %d", fPendingCount];
3918 /* Rip or Cancel ? */
3920 hb_get_state2( fQueueEncodeLibhb, &s );
3922 if(s.state == HB_STATE_WORKING || s.state == HB_STATE_PAUSED)
3924 [self Cancel: sender];
3928 /* We check to see if we need to warn the user that the computer will go to sleep
3929 or shut down when encoding is finished */
3930 [self remindUserOfSleepOrShutdown];
3932 // If there are pending jobs in the queue, then this is a rip the queue
3933 if (fPendingCount > 0)
3935 currentQueueEncodeIndex = [self getNextPendingQueueIndex];
3936 /* here lets start the queue with the first pending item */
3937 [self performNewQueueScan:[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"SourcePath"] scanTitleNum:[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"TitleNumber"]intValue]];
3942 // Before adding jobs to the queue, check for a valid destination.
3944 NSString *destinationDirectory = [[fDstFile2Field stringValue] stringByDeletingLastPathComponent];
3945 if ([[NSFileManager defaultManager] fileExistsAtPath:destinationDirectory] == 0)
3947 NSRunAlertPanel(@"Warning!", @"This is not a valid destination directory!", @"OK", nil, nil);
3951 /* We check for duplicate name here */
3952 if( [[NSFileManager defaultManager] fileExistsAtPath:[fDstFile2Field stringValue]] )
3954 NSBeginCriticalAlertSheet( NSLocalizedString( @"File already exists", @"" ),
3955 NSLocalizedString( @"Cancel", "" ), NSLocalizedString( @"Overwrite", @"" ), nil, fWindow, self,
3956 @selector( overWriteAlertDone:returnCode:contextInfo: ),
3957 NULL, NULL, [NSString stringWithFormat:
3958 NSLocalizedString( @"Do you want to overwrite %@?", @"" ),
3959 [fDstFile2Field stringValue]] );
3961 // overWriteAlertDone: will be called when the alert is dismissed. It will call doRip.
3965 /* if there are no pending jobs in the queue, then add this one to the queue and rip
3966 otherwise, just rip the queue */
3967 if(fPendingCount == 0)
3969 [self doAddToQueue];
3972 /* go right to processing the new queue encode */
3973 currentQueueEncodeIndex = [self getNextPendingQueueIndex];
3974 [self performNewQueueScan:[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"SourcePath"] scanTitleNum:[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"TitleNumber"]intValue]];
3979 /* overWriteAlertDone: called from the alert posted by Rip: that asks the user if they
3980 want to overwrite an exiting movie file.
3982 - (void) overWriteAlertDone: (NSWindow *) sheet
3983 returnCode: (int) returnCode contextInfo: (void *) contextInfo
3985 if( returnCode == NSAlertAlternateReturn )
3987 /* if there are no jobs in the queue, then add this one to the queue and rip
3988 otherwise, just rip the queue */
3989 if( fPendingCount == 0 )
3991 [self doAddToQueue];
3994 NSString *destinationDirectory = [[fDstFile2Field stringValue] stringByDeletingLastPathComponent];
3995 [[NSUserDefaults standardUserDefaults] setObject:destinationDirectory forKey:@"LastDestinationDirectory"];
3996 [self performNewQueueScan:[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"SourcePath"] scanTitleNum:[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"TitleNumber"]intValue]];
4001 - (void) remindUserOfSleepOrShutdown
4003 if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Put Computer To Sleep"])
4005 /*Warn that computer will sleep after encoding*/
4008 reminduser = NSRunAlertPanel(@"The computer will sleep after encoding is done.",@"You have selected to sleep the computer after encoding. To turn off sleeping, go to the HandBrake preferences.", @"OK", @"Preferences...", nil);
4009 [NSApp requestUserAttention:NSCriticalRequest];
4010 if ( reminduser == NSAlertAlternateReturn )
4012 [self showPreferencesWindow:nil];
4015 else if ([[[NSUserDefaults standardUserDefaults] stringForKey:@"AlertWhenDone"] isEqualToString: @"Shut Down Computer"])
4017 /*Warn that computer will shut down after encoding*/
4020 reminduser = NSRunAlertPanel(@"The computer will shut down after encoding is done.",@"You have selected to shut down the computer after encoding. To turn off shut down, go to the HandBrake preferences.", @"OK", @"Preferences...", nil);
4021 [NSApp requestUserAttention:NSCriticalRequest];
4022 if ( reminduser == NSAlertAlternateReturn )
4024 [self showPreferencesWindow:nil];
4033 /* Let libhb do the job */
4034 hb_start( fQueueEncodeLibhb );
4035 /*set the fEncodeState State */
4040 //------------------------------------------------------------------------------------
4041 // Displays an alert asking user if the want to cancel encoding of current job.
4042 // Cancel: returns immediately after posting the alert. Later, when the user
4043 // acknowledges the alert, doCancelCurrentJob is called.
4044 //------------------------------------------------------------------------------------
4045 - (IBAction)Cancel: (id)sender
4047 if (!fQueueController) return;
4049 hb_pause( fQueueEncodeLibhb );
4050 NSString * alertTitle = [NSString stringWithFormat:NSLocalizedString(@"You are currently encoding. What would you like to do ?", nil)];
4052 // Which window to attach the sheet to?
4053 NSWindow * docWindow;
4054 if ([sender respondsToSelector: @selector(window)])
4055 docWindow = [sender window];
4057 docWindow = fWindow;
4059 NSBeginCriticalAlertSheet(
4061 NSLocalizedString(@"Continue Encoding", nil),
4062 NSLocalizedString(@"Cancel Current and Stop", nil),
4063 NSLocalizedString(@"Cancel Current and Continue", nil),
4065 nil, @selector(didDimissCancel:returnCode:contextInfo:), nil,
4066 NSLocalizedString(@"Your encode will be cancelled if you don't continue encoding.", nil));
4068 // didDimissCancelCurrentJob:returnCode:contextInfo: will be called when the dialog is dismissed
4071 - (void) didDimissCancel: (NSWindow *)sheet returnCode: (int)returnCode contextInfo: (void *)contextInfo
4073 hb_resume( fQueueEncodeLibhb );
4074 if (returnCode == NSAlertOtherReturn)
4076 [self doCancelCurrentJob]; // <- this also stops libhb
4078 if (returnCode == NSAlertAlternateReturn)
4080 [self doCancelCurrentJobAndStop];
4084 //------------------------------------------------------------------------------------
4085 // Cancels and deletes the current job and stops libhb from processing the remaining
4087 //------------------------------------------------------------------------------------
4088 - (void) doCancelCurrentJob
4090 // Stop the current job. hb_stop will only cancel the current pass and then set
4091 // its state to HB_STATE_WORKDONE. It also does this asynchronously. So when we
4092 // see the state has changed to HB_STATE_WORKDONE (in updateUI), we'll delete the
4093 // remaining passes of the job and then start the queue back up if there are any
4097 hb_stop( fQueueEncodeLibhb );
4099 // Delete all remaining jobs since libhb doesn't do this on its own.
4101 while( ( job = hb_job(fQueueEncodeLibhb, 0) ) )
4102 hb_rem( fQueueEncodeLibhb, job );
4104 fEncodeState = 2; // don't alert at end of processing since this was a cancel
4106 // now that we've stopped the currently encoding job, lets mark it as cancelled
4107 [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] setObject:[NSNumber numberWithInt:3] forKey:@"Status"];
4108 // and as always, save it in the queue .plist...
4109 /* We save all of the Queue data here */
4110 [self saveQueueFileItem];
4112 // ... and see if there are more items left in our queue
4113 int queueItems = [QueueFileArray count];
4114 /* If we still have more items in our queue, lets go to the next one */
4115 /* Check to see if there are any more pending items in the queue */
4116 int newQueueItemIndex = [self getNextPendingQueueIndex];
4117 /* If we still have more pending items in our queue, lets go to the next one */
4118 if (newQueueItemIndex >= 0 && newQueueItemIndex < queueItems)
4120 /*Set our currentQueueEncodeIndex now to the newly found Pending encode as we own it */
4121 currentQueueEncodeIndex = newQueueItemIndex;
4122 /* now we mark the queue item as Status = 1 ( being encoded ) so another instance can not come along and try to scan it while we are scanning */
4123 [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] setObject:[NSNumber numberWithInt:1] forKey:@"Status"];
4124 [self writeToActivityLog: "incrementQueueItemDone new pending items found: %d", currentQueueEncodeIndex];
4125 [self saveQueueFileItem];
4126 /* now we can go ahead and scan the new pending queue item */
4127 [self performNewQueueScan:[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"SourcePath"] scanTitleNum:[[[QueueFileArray objectAtIndex:currentQueueEncodeIndex] objectForKey:@"TitleNumber"]intValue]];
4132 [self writeToActivityLog: "incrementQueueItemDone there are no more pending encodes"];
4136 - (void) doCancelCurrentJobAndStop
4138 hb_stop( fQueueEncodeLibhb );
4140 // Delete all remaining jobs since libhb doesn't do this on its own.
4142 while( ( job = hb_job(fQueueEncodeLibhb, 0) ) )
4143 hb_rem( fQueueEncodeLibhb, job );
4146 fEncodeState = 2; // don't alert at end of processing since this was a cancel
4148 // now that we've stopped the currently encoding job, lets mark it as cancelled
4149 [[QueueFileArray objectAtIndex:currentQueueEncodeIndex] setObject:[NSNumber numberWithInt:3] forKey:@"Status"];
4150 // and as always, save it in the queue .plist...
4151 /* We save all of the Queue data here */
4152 [self saveQueueFileItem];
4153 // so now lets move to
4154 currentQueueEncodeIndex++ ;
4155 [self writeToActivityLog: "cancelling current job and stopping the queue"];
4157 - (IBAction) Pause: (id) sender
4160 hb_get_state2( fQueueEncodeLibhb, &s );
4162 if( s.state == HB_STATE_PAUSED )
4164 hb_resume( fQueueEncodeLibhb );
4168 hb_pause( fQueueEncodeLibhb );
4173 #pragma mark GUI Controls Changed Methods
4175 - (IBAction) titlePopUpChanged: (id) sender
4177 hb_list_t * list = hb_get_titles( fHandle );
4178 hb_title_t * title = (hb_title_t*)
4179 hb_list_item( list, [fSrcTitlePopUp indexOfSelectedItem] );
4181 /* If we are a stream type and a batch scan, grok the output file name from title->name upon title change */
4182 if (title->type == HB_STREAM_TYPE && hb_list_count( list ) > 1 )
4184 /* we set the default name according to the new title->name */
4185 [fDstFile2Field setStringValue: [NSString stringWithFormat:
4186 @"%@/%@.%@", [[fDstFile2Field stringValue] stringByDeletingLastPathComponent],
4187 [NSString stringWithUTF8String: title->name],
4188 [[fDstFile2Field stringValue] pathExtension]]];
4190 /* Change the source to read out the parent folder also */
4191 [fSrcDVD2Field setStringValue:[NSString stringWithFormat:@"%@/%@", browsedSourceDisplayName,[NSString stringWithUTF8String: title->name]]];
4194 /* For point a to point b pts encoding, set the start and end fields to 0 and the title duration in seconds respectively */
4195 int duration = (title->hours * 3600) + (title->minutes * 60) + (title->seconds);
4196 [fSrcTimeStartEncodingField setStringValue: [NSString stringWithFormat: @"%d", 0]];
4197 [fSrcTimeEndEncodingField setStringValue: [NSString stringWithFormat: @"%d", duration]];
4198 /* For point a to point b frame encoding, set the start and end fields to 0 and the title duration * announced fps in seconds respectively */
4199 [fSrcFrameStartEncodingField setStringValue: [NSString stringWithFormat: @"%d", 1]];
4200 //[fSrcFrameEndEncodingField setStringValue: [NSString stringWithFormat: @"%d", ((title->hours * 3600) + (title->minutes * 60) + (title->seconds)) * 24]];
4201 [fSrcFrameEndEncodingField setStringValue: [NSString stringWithFormat: @"%d", duration * (title->rate / title->rate_base)]];
4203 /* If Auto Naming is on. We create an output filename of dvd name - title number */
4204 if( [[NSUserDefaults standardUserDefaults] boolForKey:@"DefaultAutoNaming"] > 0 && ( hb_list_count( list ) > 1 ) )
4206 [fDstFile2Field setStringValue: [NSString stringWithFormat:
4207 @"%@/%@-%d.%@", [[fDstFile2Field stringValue] stringByDeletingLastPathComponent],
4208 [browsedSourceDisplayName stringByDeletingPathExtension],
4210 [[fDstFile2Field stringValue] pathExtension]]];
4212 /* Update encode start / stop variables */
4216 /* Update chapter popups */
4217 [fSrcChapterStartPopUp removeAllItems];
4218 [fSrcChapterEndPopUp removeAllItems];
4219 for( int i = 0; i < hb_list_count( title->list_chapter ); i++ )
4221 [fSrcChapterStartPopUp addItemWithTitle: [NSString
4222 stringWithFormat: @"%d", i + 1]];
4223 [fSrcChapterEndPopUp addItemWithTitle: [NSString
4224 stringWithFormat: @"%d", i + 1]];
4227 [fSrcChapterStartPopUp selectItemAtIndex: 0];
4228 [fSrcChapterEndPopUp selectItemAtIndex:
4229 hb_list_count( title->list_chapter ) - 1];
4230 [self chapterPopUpChanged:nil];
4232 /* if using dvd nav, show the angle widget */
4233 if ([[[NSUserDefaults standardUserDefaults] objectForKey:@"UseDvdNav"] boolValue])
4235 [fSrcAngleLabel setHidden:NO];
4236 [fSrcAnglePopUp setHidden:NO];
4238 [fSrcAnglePopUp removeAllItems];
4239 for( int i = 0; i < title->angle_count; i++ )
4241 [fSrcAnglePopUp addItemWithTitle: [NSString stringWithFormat: @"%d", i + 1]];
4243 [fSrcAnglePopUp selectItemAtIndex: 0];
4247 [fSrcAngleLabel setHidden:YES];
4248 [fSrcAnglePopUp setHidden:YES];
4251 /* Start Get and set the initial pic size for display */
4252 hb_job_t * job = title->job;
4255 /* Set Auto Crop to on upon selecting a new title */
4256 [fPictureController setAutoCrop:YES];
4258 /* We get the originial output picture width and height and put them
4259 in variables for use with some presets later on */
4260 PicOrigOutputWidth = job->width;
4261 PicOrigOutputHeight = job->height;
4262 AutoCropTop = job->crop[0];
4263 AutoCropBottom = job->crop[1];
4264 AutoCropLeft = job->crop[2];
4265 AutoCropRight = job->crop[3];
4267 /* Reset the new title in fPictureController && fPreviewController*/
4268 [fPictureController SetTitle:title];
4271 /* Update Subtitle Table */
4272 [fSubtitlesDelegate resetWithTitle:title];
4273 [fSubtitlesTable reloadData];
4276 /* Update chapter table */
4277 [fChapterTitlesDelegate resetWithTitle:title];
4278 [fChapterTable reloadData];
4280 /* Update audio table */
4281 [[NSNotificationCenter defaultCenter] postNotification:
4282 [NSNotification notificationWithName: HBTitleChangedNotification
4284 userInfo: [NSDictionary dictionaryWithObjectsAndKeys:
4285 [NSData dataWithBytesNoCopy: &fTitle length: sizeof(fTitle) freeWhenDone: NO], keyTitleTag,
4288 /* Lets make sure there arent any erroneous audio tracks in the job list, so lets make sure its empty*/
4289 int audiotrack_count = hb_list_count(job->list_audio);
4290 for( int i = 0; i < audiotrack_count;i++)
4292 hb_audio_t * temp_audio = (hb_audio_t*) hb_list_item( job->list_audio, 0 );
4293 hb_list_rem(job->list_audio, temp_audio);
4297 [fVidRatePopUp selectItemAtIndex: 0];
4299 /* we run the picture size values through calculatePictureSizing to get all picture setting information*/
4300 [self calculatePictureSizing:nil];
4302 /* lets call tableViewSelected to make sure that any preset we have selected is enforced after a title change */
4303 [self selectPreset:nil];
4306 - (IBAction) encodeStartStopPopUpChanged: (id) sender;
4308 if( [fEncodeStartStopPopUp isEnabled] )
4310 /* We are chapters */
4311 if( [fEncodeStartStopPopUp indexOfSelectedItem] == 0 )
4313 [fSrcChapterStartPopUp setHidden: NO];
4314 [fSrcChapterEndPopUp setHidden: NO];
4316 [fSrcTimeStartEncodingField setHidden: YES];
4317 [fSrcTimeEndEncodingField setHidden: YES];
4319 [fSrcFrameStartEncodingField setHidden: YES];
4320 [fSrcFrameEndEncodingField setHidden: YES];
4322 [self chapterPopUpChanged:nil];
4324 /* We are time based (seconds) */
4325 else if ([fEncodeStartStopPopUp indexOfSelectedItem] == 1)
4327 [fSrcChapterStartPopUp setHidden: YES];
4328 [fSrcChapterEndPopUp setHidden: YES];
4330 [fSrcTimeStartEncodingField setHidden: NO];
4331 [fSrcTimeEndEncodingField setHidden: NO];
4333 [fSrcFrameStartEncodingField setHidden: YES];
4334 [fSrcFrameEndEncodingField setHidden: YES];
4336 [self startEndSecValueChanged:nil];
4338 /* We are frame based */
4339 else if ([fEncodeStartStopPopUp indexOfSelectedItem] == 2)
4341 [fSrcChapterStartPopUp setHidden: YES];
4342 [fSrcChapterEndPopUp setHidden: YES];
4344 [fSrcTimeStartEncodingField setHidden: YES];
4345 [fSrcTimeEndEncodingField setHidden: YES];
4347 [fSrcFrameStartEncodingField setHidden: NO];
4348 [fSrcFrameEndEncodingField setHidden: NO];
4350 [self startEndFrameValueChanged:nil];
4355 - (IBAction) chapterPopUpChanged: (id) sender
4358 /* If start chapter popup is greater than end chapter popup,
4359 we set the end chapter popup to the same as start chapter popup */
4360 if ([fSrcChapterStartPopUp indexOfSelectedItem] > [fSrcChapterEndPopUp indexOfSelectedItem])
4362 [fSrcChapterEndPopUp selectItemAtIndex: [fSrcChapterStartPopUp indexOfSelectedItem]];
4366 hb_list_t * list = hb_get_titles( fHandle );
4367 hb_title_t * title = (hb_title_t *)
4368 hb_list_item( list, [fSrcTitlePopUp indexOfSelectedItem] );
4370 hb_chapter_t * chapter;
4371 int64_t duration = 0;
4372 for( int i = [fSrcChapterStartPopUp indexOfSelectedItem];
4373 i <= [fSrcChapterEndPopUp indexOfSelectedItem]; i++ )
4375 chapter = (hb_chapter_t *) hb_list_item( title->list_chapter, i );
4376 duration += chapter->duration;
4379 duration /= 90000; /* pts -> seconds */
4380 [fSrcDuration2Field setStringValue: [NSString stringWithFormat:
4381 @"%02lld:%02lld:%02lld", duration / 3600, ( duration / 60 ) % 60,
4384 [self calculateBitrate: sender];
4386 if ( [fSrcChapterStartPopUp indexOfSelectedItem] == [fSrcChapterEndPopUp indexOfSelectedItem] )
4388 /* Disable chapter markers for any source with less than two chapters as it makes no sense. */
4389 [fCreateChapterMarkers setEnabled: NO];
4390 [fCreateChapterMarkers setState: NSOffState];
4394 [fCreateChapterMarkers setEnabled: YES];
4398 - (IBAction) startEndSecValueChanged: (id) sender
4401 int duration = [fSrcTimeEndEncodingField intValue] - [fSrcTimeStartEncodingField intValue];
4402 [fSrcDuration2Field setStringValue: [NSString stringWithFormat:
4403 @"%02d:%02d:%02d", duration / 3600, ( duration / 60 ) % 60,
4406 //[self calculateBitrate: sender];
4410 - (IBAction) startEndFrameValueChanged: (id) sender
4412 hb_list_t * list = hb_get_titles( fHandle );
4413 hb_title_t * title = (hb_title_t*)
4414 hb_list_item( list, [fSrcTitlePopUp indexOfSelectedItem] );
4416 int duration = ([fSrcFrameEndEncodingField intValue] - [fSrcFrameStartEncodingField intValue]) / (title->rate / title->rate_base);
4417 [fSrcDuration2Field setStringValue: [NSString stringWithFormat:
4418 @"%02d:%02d:%02d", duration / 3600, ( duration / 60 ) % 60,
4421 //[self calculateBitrate: sender];
4425 - (IBAction) formatPopUpChanged: (id) sender
4427 NSString * string = [fDstFile2Field stringValue];
4428 int format = [fDstFormatPopUp indexOfSelectedItem];
4430 /* Initially set the large file (64 bit formatting) output checkbox to hidden */
4431 [fDstMp4LargeFileCheck setHidden: YES];
4432 [fDstMp4HttpOptFileCheck setHidden: YES];
4433 [fDstMp4iPodFileCheck setHidden: YES];
4435 /* Update the Video Codec PopUp */
4436 /* lets get the tag of the currently selected item first so we might reset it later */
4437 int selectedVidEncoderTag;
4438 selectedVidEncoderTag = [[fVidEncoderPopUp selectedItem] tag];
4440 /* Note: we now store the video encoder int values from common.c in the tags of each popup for easy retrieval later */
4441 [fVidEncoderPopUp removeAllItems];
4442 NSMenuItem *menuItem;
4443 /* These video encoders are available to all of our current muxers, so lets list them once here */
4444 menuItem = [[fVidEncoderPopUp menu] addItemWithTitle:@"MPEG-4 (FFmpeg)" action: NULL keyEquivalent: @""];
4445 [menuItem setTag: HB_VCODEC_FFMPEG];
4450 /*Get Default MP4 File Extension*/
4451 if ([[NSUserDefaults standardUserDefaults] boolForKey:@"DefaultMpegName"] > 0)
4459 /* Add additional video encoders here */
4460 menuItem = [[fVidEncoderPopUp menu] addItemWithTitle:@"H.264 (x264)" action: NULL keyEquivalent: @""];
4461 [menuItem setTag: HB_VCODEC_X264];
4462 /* We show the mp4 option checkboxes here since we are mp4 */
4463 [fCreateChapterMarkers setEnabled: YES];
4464 [fDstMp4LargeFileCheck setHidden: NO];
4465 [fDstMp4HttpOptFileCheck setHidden: NO];
4466 [fDstMp4iPodFileCheck setHidden: NO];
4471 /* Add additional video encoders here */
4472 menuItem = [[fVidEncoderPopUp menu] addItemWithTitle:@"H.264 (x264)" action: NULL keyEquivalent: @""];
4473 [menuItem setTag: HB_VCODEC_X264];
4474 menuItem = [[fVidEncoderPopUp menu] addItemWithTitle:@"VP3 (Theora)" action: NULL keyEquivalent: @""];
4475 [menuItem setTag: HB_VCODEC_THEORA];
4476 /* We enable the create chapters checkbox here */
4477 [fCreateChapterMarkers setEnabled: YES];
4482 /* tell fSubtitlesDelegate we have a new video container */
4484 [fSubtitlesDelegate containerChanged:[[fDstFormatPopUp selectedItem] tag]];
4485 [fSubtitlesTable reloadData];
4487 /* post a notification for any interested observers to indicate that our video container has changed */
4488 [[NSNotificationCenter defaultCenter] postNotification:
4489 [NSNotification notificationWithName: HBContainerChangedNotification
4491 userInfo: [NSDictionary dictionaryWithObjectsAndKeys:
4492 [NSNumber numberWithInt: [[fDstFormatPopUp selectedItem] tag]], keyContainerTag,
4495 /* if we have a previously selected vid encoder tag, then try to select it */
4496 if (selectedVidEncoderTag)
4498 [fVidEncoderPopUp selectItemWithTag: selectedVidEncoderTag];
4502 [fVidEncoderPopUp selectItemAtIndex: 0];
4507 [self autoSetM4vExtension: sender];
4509 [fDstFile2Field setStringValue: [NSString stringWithFormat:@"%@.%s", [string stringByDeletingPathExtension], ext]];
4511 if( SuccessfulScan )
4513 /* Add/replace to the correct extension */
4515 if( [fVidEncoderPopUp selectedItem] == nil )
4518 [fVidEncoderPopUp selectItemAtIndex:0];
4519 [self videoEncoderPopUpChanged:nil];
4521 /* changing the format may mean that we can / can't offer mono or 6ch, */
4522 /* so call audioTrackPopUpChanged for both audio tracks to update the mixdown popups */
4524 /* We call the method to properly enable/disable turbo 2 pass */
4525 [self twoPassCheckboxChanged: sender];
4526 /* We call method method to change UI to reflect whether a preset is used or not*/
4529 [self customSettingUsed: sender];
4532 - (IBAction) autoSetM4vExtension: (id) sender
4534 if ( [fDstFormatPopUp indexOfSelectedItem] )
4537 NSString * extension = @"mp4";
4539 BOOL anyCodecAC3 = [fAudioDelegate anyCodecMatches: HB_ACODEC_AC3];
4540 if (YES == anyCodecAC3 ||
4541 [fCreateChapterMarkers state] == NSOnState ||
4542 [[NSUserDefaults standardUserDefaults] boolForKey:@"DefaultMpegName"] > 0 )
4547 if( [extension isEqualTo: [[fDstFile2Field stringValue] pathExtension]] )
4550 [fDstFile2Field setStringValue: [NSString stringWithFormat:@"%@.%@",
4551 [[fDstFile2Field stringValue] stringByDeletingPathExtension], extension]];
4554 /* Method to determine if we should change the UI
4555 To reflect whether or not a Preset is being used or if
4556 the user is using "Custom" settings by determining the sender*/
4557 - (IBAction) customSettingUsed: (id) sender
4559 if ([sender stringValue])
4561 /* Deselect the currently selected Preset if there is one*/
4562 [fPresetsOutlineView deselectRow:[fPresetsOutlineView selectedRow]];
4563 /* Change UI to show "Custom" settings are being used */
4564 [fPresetSelectedDisplay setStringValue: @"Custom"];
4566 curUserPresetChosenNum = nil;
4568 [self calculateBitrate:nil];
4573 #pragma mark - Video
4575 - (IBAction) videoEncoderPopUpChanged: (id) sender
4577 hb_job_t * job = fTitle->job;
4578 int videoEncoder = [[fVidEncoderPopUp selectedItem] tag];
4580 [fAdvancedOptions setHidden:YES];
4581 /* If we are using x264 then show the x264 advanced panel*/
4582 if (videoEncoder == HB_VCODEC_X264)
4584 [fAdvancedOptions setHidden:NO];
4585 [self autoSetM4vExtension: sender];
4588 if (videoEncoder == HB_VCODEC_FFMPEG)
4590 /* We set the iPod atom checkbox to disabled and uncheck it as its only for x264 in the mp4
4591 container. Format is taken care of in formatPopUpChanged method by hiding and unchecking
4592 anything other than MP4.
4594 [fDstMp4iPodFileCheck setEnabled: NO];
4595 [fDstMp4iPodFileCheck setState: NSOffState];
4599 [fDstMp4iPodFileCheck setEnabled: YES];
4601 [self setupQualitySlider];
4602 [self calculatePictureSizing: sender];
4603 [self twoPassCheckboxChanged: sender];
4607 - (IBAction) twoPassCheckboxChanged: (id) sender
4609 /* check to see if x264 is chosen */
4610 if([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_X264)
4612 if( [fVidTwoPassCheck state] == NSOnState)
4614 [fVidTurboPassCheck setHidden: NO];
4618 [fVidTurboPassCheck setHidden: YES];
4619 [fVidTurboPassCheck setState: NSOffState];
4621 /* Make sure Two Pass is checked if Turbo is checked */
4622 if( [fVidTurboPassCheck state] == NSOnState)
4624 [fVidTwoPassCheck setState: NSOnState];
4629 [fVidTurboPassCheck setHidden: YES];
4630 [fVidTurboPassCheck setState: NSOffState];
4633 /* We call method method to change UI to reflect whether a preset is used or not*/
4634 [self customSettingUsed: sender];
4637 - (IBAction ) videoFrameRateChanged: (id) sender
4639 /* Hide and set the PFR Checkbox to OFF if we are set to Same as Source */
4640 if ([fVidRatePopUp indexOfSelectedItem] == 0)
4642 [fFrameratePfrCheck setHidden:YES];
4643 [fFrameratePfrCheck setState:0];
4647 [fFrameratePfrCheck setHidden:NO];
4650 /* We call method method to calculatePictureSizing to error check detelecine*/
4651 [self calculatePictureSizing: sender];
4653 /* We call method method to change UI to reflect whether a preset is used or not*/
4654 [self customSettingUsed: sender];
4656 - (IBAction) videoMatrixChanged: (id) sender;
4658 bool target, bitrate, quality;
4660 target = bitrate = quality = false;
4661 if( [fVidQualityMatrix isEnabled] )
4663 switch( [fVidQualityMatrix selectedRow] )
4676 [fVidTargetSizeField setEnabled: target];
4677 [fVidBitrateField setEnabled: bitrate];
4678 [fVidQualitySlider setEnabled: quality];
4679 [fVidQualityRFField setEnabled: quality];
4680 [fVidQualityRFLabel setEnabled: quality];
4681 [fVidTwoPassCheck setEnabled: !quality &&
4682 [fVidQualityMatrix isEnabled]];
4685 [fVidTwoPassCheck setState: NSOffState];
4686 [fVidTurboPassCheck setHidden: YES];
4687 [fVidTurboPassCheck setState: NSOffState];
4690 [self qualitySliderChanged: sender];
4691 [self calculateBitrate: sender];
4692 [self customSettingUsed: sender];
4695 /* Use this method to setup the quality slider for cq/rf values depending on
4696 * the video encoder selected.
4698 - (void) setupQualitySlider
4700 /* Get the current slider maxValue to check for a change in slider scale later
4701 * so that we can choose a new similar value on the new slider scale */
4702 float previousMaxValue = [fVidQualitySlider maxValue];
4703 float previousPercentOfSliderScale = [fVidQualitySlider floatValue] / ([fVidQualitySlider maxValue] - [fVidQualitySlider minValue] + 1);
4704 NSString * qpRFLabelString = @"QP:";
4706 if ([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_X264)
4708 [fVidQualitySlider setMinValue:0.0];
4709 [fVidQualitySlider setMaxValue:51.0];
4710 /* As x264 allows for qp/rf values that are fractional, we get the value from the preferences */
4711 int fractionalGranularity = 1 / [[NSUserDefaults standardUserDefaults] floatForKey:@"x264CqSliderFractional"];
4712 [fVidQualitySlider setNumberOfTickMarks:(([fVidQualitySlider maxValue] - [fVidQualitySlider minValue]) * fractionalGranularity) + 1];
4713 qpRFLabelString = @"RF:";
4716 if ([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_FFMPEG )
4718 [fVidQualitySlider setMinValue:1.0];
4719 [fVidQualitySlider setMaxValue:31.0];
4720 [fVidQualitySlider setNumberOfTickMarks:31];
4723 if ([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_THEORA)
4725 [fVidQualitySlider setMinValue:0.0];
4726 [fVidQualitySlider setMaxValue:63.0];
4727 [fVidQualitySlider setNumberOfTickMarks:64];
4729 [fVidQualityRFLabel setStringValue:qpRFLabelString];
4731 /* check to see if we have changed slider scales */
4732 if (previousMaxValue != [fVidQualitySlider maxValue])
4734 /* if so, convert the old setting to the new scale as close as possible based on percentages */
4735 float rf = ([fVidQualitySlider maxValue] - [fVidQualitySlider minValue] + 1) * previousPercentOfSliderScale;
4736 [fVidQualitySlider setFloatValue:rf];
4739 [self qualitySliderChanged:nil];
4742 - (IBAction) qualitySliderChanged: (id) sender
4744 /* Our constant quality slider is in a range based
4745 * on each encoders qp/rf values. The range depends
4746 * on the encoder. Also, the range is inverse of quality
4747 * for all of the encoders *except* for theora
4748 * (ie. as the "quality" goes up, the cq or rf value
4749 * actually goes down). Since the IB sliders always set
4750 * their max value at the right end of the slider, we
4751 * will calculate the inverse, so as the slider floatValue
4752 * goes up, we will show the inverse in the rf field
4753 * so, the floatValue at the right for x264 would be 51
4754 * and our rf field needs to show 0 and vice versa.
4757 float sliderRfInverse = ([fVidQualitySlider maxValue] - [fVidQualitySlider floatValue]) + [fVidQualitySlider minValue];
4758 /* If the encoder is theora, use the float, otherwise use the inverse float*/
4759 //float sliderRfToPercent;
4760 if ([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_THEORA)
4762 [fVidQualityRFField setStringValue: [NSString stringWithFormat: @"%.2f", [fVidQualitySlider floatValue]]];
4766 [fVidQualityRFField setStringValue: [NSString stringWithFormat: @"%.2f", sliderRfInverse]];
4768 [self customSettingUsed: sender];
4771 - (void) controlTextDidChange: (NSNotification *) notification
4773 [self calculateBitrate:nil];
4776 - (IBAction) calculateBitrate: (id) sender
4778 if( !fHandle || [fVidQualityMatrix selectedRow] != 0 || !SuccessfulScan )
4783 hb_list_t * list = hb_get_titles( fHandle );
4784 hb_title_t * title = (hb_title_t *) hb_list_item( list,
4785 [fSrcTitlePopUp indexOfSelectedItem] );
4786 hb_job_t * job = title->job;
4787 hb_audio_config_t * audio;
4788 /* For hb_calc_bitrate in addition to the Target Size in MB out of the
4789 * Target Size Field, we also need the job info for the Muxer, the Chapters
4790 * as well as all of the audio track info.
4791 * This used to be accomplished by simply calling prepareJob here, however
4792 * since the resilient queue sets the queue array values instead of the job
4793 * values directly, we duplicate the old prepareJob code here for the variables
4796 job->chapter_start = [fSrcChapterStartPopUp indexOfSelectedItem] + 1;
4797 job->chapter_end = [fSrcChapterEndPopUp indexOfSelectedItem] + 1;
4798 job->mux = [[fDstFormatPopUp selectedItem] tag];
4800 /* Audio goes here */
4801 [fAudioDelegate prepareAudioForJob: job];
4803 [fVidBitrateField setIntValue: hb_calc_bitrate( job, [fVidTargetSizeField intValue] )];
4807 #pragma mark - Picture
4809 /* lets set the picture size back to the max from right after title scan
4810 Lets use an IBAction here as down the road we could always use a checkbox
4811 in the gui to easily take the user back to max. Remember, the compiler
4812 resolves IBActions down to -(void) during compile anyway */
4813 - (IBAction) revertPictureSizeToMax: (id) sender
4815 hb_job_t * job = fTitle->job;
4816 /* Here we apply the title source and height */
4817 job->width = fTitle->width;
4818 job->height = fTitle->height;
4820 [self calculatePictureSizing: sender];
4821 /* We call method to change UI to reflect whether a preset is used or not*/
4822 [self customSettingUsed: sender];
4826 * Registers changes made in the Picture Settings Window.
4829 - (void)pictureSettingsDidChange
4831 [self calculatePictureSizing:nil];
4834 /* Get and Display Current Pic Settings in main window */
4835 - (IBAction) calculatePictureSizing: (id) sender
4837 if (fTitle->job->anamorphic.mode > 0)
4839 fTitle->job->keep_ratio = 0;
4842 if (fTitle->job->anamorphic.mode != 1) // we are not strict so show the modulus
4844 [fPictureSizeField setStringValue: [NSString stringWithFormat:@"Picture Size: %@, Modulus: %d", [fPictureController getPictureSizeInfoString], fTitle->job->modulus]];
4848 [fPictureSizeField setStringValue: [NSString stringWithFormat:@"Picture Size: %@", [fPictureController getPictureSizeInfoString]]];
4850 NSString *picCropping;
4851 /* Set the display field for crop as per boolean */
4852 if (![fPictureController autoCrop])
4854 picCropping = @"Custom";
4858 picCropping = @"Auto";
4860 picCropping = [picCropping stringByAppendingString:[NSString stringWithFormat:@" %d/%d/%d/%d",fTitle->job->crop[0],fTitle->job->crop[1],fTitle->job->crop[2],fTitle->job->crop[3]]];
4862 [fPictureCroppingField setStringValue: [NSString stringWithFormat:@"Picture Cropping: %@",picCropping]];
4864 NSString *videoFilters;
4867 if ([fPictureController detelecine] == 2)
4869 videoFilters = [videoFilters stringByAppendingString:@" - Detelecine (Default)"];
4871 else if ([fPictureController detelecine] == 1)
4873 videoFilters = [videoFilters stringByAppendingString:[NSString stringWithFormat:@" - Detelecine (%@)",[fPictureController detelecineCustomString]]];
4877 if ([fPictureController useDecomb] == 1)
4880 if ([fPictureController decomb] == 2)
4882 videoFilters = [videoFilters stringByAppendingString:@" - Decomb (Default)"];
4884 else if ([fPictureController decomb] == 1)
4886 videoFilters = [videoFilters stringByAppendingString:[NSString stringWithFormat:@" - Decomb (%@)",[fPictureController decombCustomString]]];
4892 if ([fPictureController deinterlace] > 0)
4894 fTitle->job->deinterlace = 1;
4898 fTitle->job->deinterlace = 0;
4901 if ([fPictureController deinterlace] == 2)
4903 videoFilters = [videoFilters stringByAppendingString:@" - Deinterlace (Fast)"];
4905 else if ([fPictureController deinterlace] == 3)
4907 videoFilters = [videoFilters stringByAppendingString:@" - Deinterlace (Slow)"];
4909 else if ([fPictureController deinterlace] == 4)
4911 videoFilters = [videoFilters stringByAppendingString:@" - Deinterlace (Slower)"];
4913 else if ([fPictureController deinterlace] == 1)
4915 videoFilters = [videoFilters stringByAppendingString:[NSString stringWithFormat:@" - Deinterlace (%@)",[fPictureController deinterlaceCustomString]]];
4921 if ([fPictureController denoise] == 2)
4923 videoFilters = [videoFilters stringByAppendingString:@" - Denoise (Weak)"];
4925 else if ([fPictureController denoise] == 3)
4927 videoFilters = [videoFilters stringByAppendingString:@" - Denoise (Medium)"];
4929 else if ([fPictureController denoise] == 4)
4931 videoFilters = [videoFilters stringByAppendingString:@" - Denoise (Strong)"];
4933 else if ([fPictureController denoise] == 1)
4935 videoFilters = [videoFilters stringByAppendingString:[NSString stringWithFormat:@" - Denoise (%@)",[fPictureController denoiseCustomString]]];
4939 if ([fPictureController deblock] > 0)
4941 videoFilters = [videoFilters stringByAppendingString:[NSString stringWithFormat:@" - Deblock (%d)",[fPictureController deblock]]];
4945 if ([fPictureController grayscale])
4947 videoFilters = [videoFilters stringByAppendingString:@" - Grayscale"];
4949 [fVideoFiltersField setStringValue: [NSString stringWithFormat:@"Video Filters: %@", videoFilters]];
4951 //[fPictureController reloadStillPreview];
4956 #pragma mark - Audio and Subtitles
4961 - (BOOL) hasValidPresetSelected
4964 return ([fPresetsOutlineView selectedRow] >= 0 && [[[fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]] objectForKey:@"Folder"] intValue] != 1);
4967 // This causes all audio tracks from the title to be used based on the current preset
4968 - (IBAction) addAllAudioTracks: (id) sender
4971 [fAudioDelegate addAllTracksFromPreset: [fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]]];
4975 - (IBAction) browseImportSrtFile: (id) sender
4978 NSOpenPanel * panel;
4980 panel = [NSOpenPanel openPanel];
4981 [panel setAllowsMultipleSelection: NO];
4982 [panel setCanChooseFiles: YES];
4983 [panel setCanChooseDirectories: NO ];
4984 NSString * sourceDirectory;
4985 if ([[NSUserDefaults standardUserDefaults] stringForKey:@"LastSrtImportDirectory"])
4987 sourceDirectory = [[NSUserDefaults standardUserDefaults] stringForKey:@"LastSrtImportDirectory"];
4991 sourceDirectory = @"~/Desktop";
4992 sourceDirectory = [sourceDirectory stringByExpandingTildeInPath];
4994 /* we open up the browse srt sheet here and call for browseImportSrtFileDone after the sheet is closed */
4995 NSArray *fileTypes = [NSArray arrayWithObjects:@"plist", @"srt", nil];
4996 [panel beginSheetForDirectory: sourceDirectory file: nil types: fileTypes
4997 modalForWindow: fWindow modalDelegate: self
4998 didEndSelector: @selector( browseImportSrtFileDone:returnCode:contextInfo: )
4999 contextInfo: sender];
5002 - (void) browseImportSrtFileDone: (NSSavePanel *) sheet
5003 returnCode: (int) returnCode contextInfo: (void *) contextInfo
5005 if( returnCode == NSOKButton )
5007 NSString *importSrtDirectory = [[sheet filename] stringByDeletingLastPathComponent];
5008 NSString *importSrtFilePath = [sheet filename];
5009 [[NSUserDefaults standardUserDefaults] setObject:importSrtDirectory forKey:@"LastSrtImportDirectory"];
5011 /* now pass the string off to fSubtitlesDelegate to add the srt file to the dropdown */
5012 [fSubtitlesDelegate createSubtitleSrtTrack:importSrtFilePath];
5014 [fSubtitlesTable reloadData];
5020 #pragma mark Open New Windows
5022 - (IBAction) openHomepage: (id) sender
5024 [[NSWorkspace sharedWorkspace] openURL: [NSURL
5025 URLWithString:@"http://handbrake.fr/"]];
5028 - (IBAction) openForums: (id) sender
5030 [[NSWorkspace sharedWorkspace] openURL: [NSURL
5031 URLWithString:@"http://forum.handbrake.fr/"]];
5033 - (IBAction) openUserGuide: (id) sender
5035 [[NSWorkspace sharedWorkspace] openURL: [NSURL
5036 URLWithString:@"http://trac.handbrake.fr/wiki/HandBrakeGuide"]];
5040 * Shows debug output window.
5042 - (IBAction)showDebugOutputPanel:(id)sender
5044 [outputPanel showOutputPanel:sender];
5048 * Shows preferences window.
5050 - (IBAction) showPreferencesWindow: (id) sender
5052 NSWindow * window = [fPreferencesController window];
5053 if (![window isVisible])
5056 [window makeKeyAndOrderFront: nil];
5060 * Shows queue window.
5062 - (IBAction) showQueueWindow:(id)sender
5064 [fQueueController showQueueWindow:sender];
5068 - (IBAction) toggleDrawer:(id)sender {
5069 [fPresetDrawer toggle:self];
5073 * Shows Picture Settings Window.
5076 - (IBAction) showPicturePanel: (id) sender
5078 [fPictureController showPictureWindow:sender];
5081 - (void) picturePanelFullScreen
5083 [fPictureController setToFullScreenMode];
5086 - (void) picturePanelWindowed
5088 [fPictureController setToWindowedMode];
5091 - (IBAction) showPreviewWindow: (id) sender
5093 [fPictureController showPreviewWindow:sender];
5097 #pragma mark Preset Outline View Methods
5098 #pragma mark - Required
5099 /* These are required by the NSOutlineView Datasource Delegate */
5102 /* used to specify the number of levels to show for each item */
5103 - (int)outlineView:(NSOutlineView *)fPresetsOutlineView numberOfChildrenOfItem:(id)item
5105 /* currently use no levels to test outline view viability */
5106 if (item == nil) // for an outline view the root level of the hierarchy is always nil
5108 return [UserPresets count];
5112 /* we need to return the count of the array in ChildrenArray for this folder */
5113 NSArray *children = nil;
5114 children = [item objectForKey:@"ChildrenArray"];
5115 if ([children count] > 0)
5117 return [children count];
5126 /* We use this to deterimine children of an item */
5127 - (id)outlineView:(NSOutlineView *)fPresetsOutlineView child:(NSInteger)index ofItem:(id)item
5130 /* we need to return the count of the array in ChildrenArray for this folder */
5131 NSArray *children = nil;
5134 children = UserPresets;
5138 if ([item objectForKey:@"ChildrenArray"])
5140 children = [item objectForKey:@"ChildrenArray"];
5143 if ((children == nil) || ( [children count] <= (NSUInteger) index))
5149 return [children objectAtIndex:index];
5153 // We are only one level deep, so we can't be asked about children
5154 //NSAssert (NO, @"Presets View outlineView:child:ofItem: currently can't handle nested items.");
5158 /* We use this to determine if an item should be expandable */
5159 - (BOOL)outlineView:(NSOutlineView *)fPresetsOutlineView isItemExpandable:(id)item
5162 /* we need to return the count of the array in ChildrenArray for this folder */
5163 NSArray *children= nil;
5166 children = UserPresets;
5170 if ([item objectForKey:@"ChildrenArray"])
5172 children = [item objectForKey:@"ChildrenArray"];
5176 /* To deterimine if an item should show a disclosure triangle
5177 * we could do it by the children count as so:
5178 * if ([children count] < 1)
5179 * However, lets leave the triangle show even if there are no
5180 * children to help indicate a folder, just like folder in the
5181 * finder can show a disclosure triangle even when empty
5184 /* We need to determine if the item is a folder */
5185 if ([[item objectForKey:@"Folder"] intValue] == 1)
5196 - (BOOL)outlineView:(NSOutlineView *)outlineView shouldExpandItem:(id)item
5198 // Our outline view has no levels, but we can still expand every item. Doing so
5199 // just makes the row taller. See heightOfRowByItem below.
5200 //return ![(HBQueueOutlineView*)outlineView isDragging];
5206 /* Used to tell the outline view which information is to be displayed per item */
5207 - (id)outlineView:(NSOutlineView *)fPresetsOutlineView objectValueForTableColumn:(NSTableColumn *)tableColumn byItem:(id)item
5209 /* We have two columns right now, icon and PresetName */
5211 if ([[tableColumn identifier] isEqualToString:@"PresetName"])
5213 return [item objectForKey:@"PresetName"];
5222 - (id)outlineView:(NSOutlineView *)outlineView itemForPersistentObject:(id)object
5224 return [NSKeyedUnarchiver unarchiveObjectWithData:object];
5226 - (id)outlineView:(NSOutlineView *)outlineView persistentObjectForItem:(id)item
5228 return [NSKeyedArchiver archivedDataWithRootObject:item];
5231 #pragma mark - Added Functionality (optional)
5232 /* Use to customize the font and display characteristics of the title cell */
5233 - (void)outlineView:(NSOutlineView *)outlineView willDisplayCell:(id)cell forTableColumn:(NSTableColumn *)tableColumn item:(id)item
5235 if ([[tableColumn identifier] isEqualToString:@"PresetName"])
5239 NSColor *shadowColor;
5240 txtFont = [NSFont systemFontOfSize: [NSFont smallSystemFontSize]];
5241 /*check to see if its a selected row */
5242 if ([fPresetsOutlineView selectedRow] == [fPresetsOutlineView rowForItem:item])
5245 fontColor = [NSColor blackColor];
5246 shadowColor = [NSColor colorWithDeviceRed:(127.0/255.0) green:(140.0/255.0) blue:(160.0/255.0) alpha:1.0];
5250 if ([[item objectForKey:@"Type"] intValue] == 0)
5252 fontColor = [NSColor blueColor];
5254 else // User created preset, use a black font
5256 fontColor = [NSColor blackColor];
5258 /* check to see if its a folder */
5259 //if ([[item objectForKey:@"Folder"] intValue] == 1)
5261 //fontColor = [NSColor greenColor];
5266 /* We use Bold Text for the HB Default */
5267 if ([[item objectForKey:@"Default"] intValue] == 1)// 1 is HB default
5269 txtFont = [NSFont boldSystemFontOfSize: [NSFont smallSystemFontSize]];
5271 /* We use Bold Text for the User Specified Default */
5272 if ([[item objectForKey:@"Default"] intValue] == 2)// 2 is User default
5274 txtFont = [NSFont boldSystemFontOfSize: [NSFont smallSystemFontSize]];
5278 [cell setTextColor:fontColor];
5279 [cell setFont:txtFont];
5284 /* We use this to edit the name field in the outline view */
5285 - (void)outlineView:(NSOutlineView *)outlineView setObjectValue:(id)object forTableColumn:(NSTableColumn *)tableColumn byItem:(id)item
5287 if ([[tableColumn identifier] isEqualToString:@"PresetName"])
5292 [theRecord setObject:object forKey:@"PresetName"];
5296 [fPresetsOutlineView reloadData];
5297 /* We save all of the preset data here */
5301 /* We use this to provide tooltips for the items in the presets outline view */
5302 - (NSString *)outlineView:(NSOutlineView *)fPresetsOutlineView toolTipForCell:(NSCell *)cell rect:(NSRectPointer)rect tableColumn:(NSTableColumn *)tc item:(id)item mouseLocation:(NSPoint)mouseLocation
5304 //if ([[tc identifier] isEqualToString:@"PresetName"])
5306 /* initialize the tooltip contents variable */
5308 /* if there is a description for the preset, we show it in the tooltip */
5309 if ([item objectForKey:@"PresetDescription"])
5311 loc_tip = [item objectForKey:@"PresetDescription"];
5316 loc_tip = @"No description available";
5322 - (void) outlineViewSelectionDidChange: (NSNotification *) ignored
5325 [self willChangeValueForKey: @"hasValidPresetSelected"];
5326 [self didChangeValueForKey: @"hasValidPresetSelected"];
5331 #pragma mark Preset Outline View Methods (dragging related)
5334 - (BOOL)outlineView:(NSOutlineView *)outlineView writeItems:(NSArray *)items toPasteboard:(NSPasteboard *)pboard
5336 // Dragging is only allowed for custom presets.
5337 //[[[fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]] objectForKey:@"Default"] intValue] != 1
5338 if ([[[fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]] objectForKey:@"Type"] intValue] == 0) // 0 is built in preset
5342 // Don't retain since this is just holding temporaral drag information, and it is
5343 //only used during a drag! We could put this in the pboard actually.
5344 fDraggedNodes = items;
5345 // Provide data for our custom type, and simple NSStrings.
5346 [pboard declareTypes:[NSArray arrayWithObjects: DragDropSimplePboardType, nil] owner:self];
5348 // the actual data doesn't matter since DragDropSimplePboardType drags aren't recognized by anyone but us!.
5349 [pboard setData:[NSData data] forType:DragDropSimplePboardType];
5354 - (NSDragOperation)outlineView:(NSOutlineView *)outlineView validateDrop:(id <NSDraggingInfo>)info proposedItem:(id)item proposedChildIndex:(NSInteger)index
5357 // Don't allow dropping ONTO an item since they can't really contain any children.
5359 BOOL isOnDropTypeProposal = index == NSOutlineViewDropOnItemIndex;
5360 if (isOnDropTypeProposal)
5361 return NSDragOperationNone;
5363 // Don't allow dropping INTO an item since they can't really contain any children as of yet.
5366 index = [fPresetsOutlineView rowForItem: item] + 1;
5370 // Don't allow dropping into the Built In Presets.
5371 if (index < presetCurrentBuiltInCount)
5373 return NSDragOperationNone;
5374 index = MAX (index, presetCurrentBuiltInCount);
5377 [outlineView setDropItem:item dropChildIndex:index];
5378 return NSDragOperationGeneric;
5383 - (BOOL)outlineView:(NSOutlineView *)outlineView acceptDrop:(id <NSDraggingInfo>)info item:(id)item childIndex:(NSInteger)index
5385 /* first, lets see if we are dropping into a folder */
5386 if ([[fPresetsOutlineView itemAtRow:index] objectForKey:@"Folder"] && [[[fPresetsOutlineView itemAtRow:index] objectForKey:@"Folder"] intValue] == 1) // if its a folder
5388 NSMutableArray *childrenArray = [[NSMutableArray alloc] init];
5389 childrenArray = [[fPresetsOutlineView itemAtRow:index] objectForKey:@"ChildrenArray"];
5390 [childrenArray addObject:item];
5391 [[fPresetsOutlineView itemAtRow:index] setObject:[NSMutableArray arrayWithArray: childrenArray] forKey:@"ChildrenArray"];
5392 [childrenArray autorelease];
5394 else // We are not, so we just move the preset into the existing array
5396 NSMutableIndexSet *moveItems = [NSMutableIndexSet indexSet];
5398 NSEnumerator *enumerator = [fDraggedNodes objectEnumerator];
5399 while (obj = [enumerator nextObject])
5401 [moveItems addIndex:[UserPresets indexOfObject:obj]];
5403 // Successful drop, lets rearrange the view and save it all
5404 [self moveObjectsInPresetsArray:UserPresets fromIndexes:moveItems toIndex: index];
5406 [fPresetsOutlineView reloadData];
5411 - (void)moveObjectsInPresetsArray:(NSMutableArray *)array fromIndexes:(NSIndexSet *)indexSet toIndex:(NSUInteger)insertIndex
5413 NSUInteger index = [indexSet lastIndex];
5414 NSUInteger aboveInsertIndexCount = 0;
5416 NSUInteger removeIndex;
5418 if (index >= insertIndex)
5420 removeIndex = index + aboveInsertIndexCount;
5421 aboveInsertIndexCount++;
5425 removeIndex = index;
5429 id object = [[array objectAtIndex:removeIndex] retain];
5430 [array removeObjectAtIndex:removeIndex];
5431 [array insertObject:object atIndex:insertIndex];
5434 index = [indexSet indexLessThanIndex:index];
5439 #pragma mark - Functional Preset NSOutlineView Methods
5441 - (IBAction)selectPreset:(id)sender
5444 if (YES == [self hasValidPresetSelected])
5446 chosenPreset = [fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]];
5447 [fPresetSelectedDisplay setStringValue:[chosenPreset objectForKey:@"PresetName"]];
5449 if ([[chosenPreset objectForKey:@"Default"] intValue] == 1)
5451 [fPresetSelectedDisplay setStringValue:[NSString stringWithFormat:@"%@ (Default)", [chosenPreset objectForKey:@"PresetName"]]];
5455 [fPresetSelectedDisplay setStringValue:[chosenPreset objectForKey:@"PresetName"]];
5459 [fDstFormatPopUp selectItemWithTitle:[chosenPreset objectForKey:@"FileFormat"]];
5460 [self formatPopUpChanged:nil];
5462 /* Chapter Markers*/
5463 [fCreateChapterMarkers setState:[[chosenPreset objectForKey:@"ChapterMarkers"] intValue]];
5464 /* check to see if we have only one chapter */
5465 [self chapterPopUpChanged:nil];
5467 /* Allow Mpeg4 64 bit formatting +4GB file sizes */
5468 [fDstMp4LargeFileCheck setState:[[chosenPreset objectForKey:@"Mp4LargeFile"] intValue]];
5469 /* Mux mp4 with http optimization */
5470 [fDstMp4HttpOptFileCheck setState:[[chosenPreset objectForKey:@"Mp4HttpOptimize"] intValue]];
5473 [fVidEncoderPopUp selectItemWithTitle:[chosenPreset objectForKey:@"VideoEncoder"]];
5474 /* We set the advanced opt string here if applicable*/
5475 [fAdvancedOptions setOptions:[chosenPreset objectForKey:@"x264Option"]];
5477 /* Lets run through the following functions to get variables set there */
5478 [self videoEncoderPopUpChanged:nil];
5479 /* Set the state of ipod compatible with Mp4iPodCompatible. Only for x264*/
5480 [fDstMp4iPodFileCheck setState:[[chosenPreset objectForKey:@"Mp4iPodCompatible"] intValue]];
5481 [self calculateBitrate:nil];
5484 [fVidQualityMatrix selectCellAtRow:[[chosenPreset objectForKey:@"VideoQualityType"] intValue] column:0];
5486 [fVidTargetSizeField setStringValue:[chosenPreset objectForKey:@"VideoTargetSize"]];
5487 [fVidBitrateField setStringValue:[chosenPreset objectForKey:@"VideoAvgBitrate"]];
5489 /* Since we are now using RF Values for the slider, we detect if the preset uses an old quality float.
5490 * So, check to see if the quality value is less than 1.0 which should indicate the old ".062" type
5491 * quality preset. Caveat: in the case of x264, where the RF scale starts at 0, it would misinterpret
5492 * a preset that uses 0.0 - 0.99 for RF as an old style preset. Not sure how to get around that one yet,
5493 * though it should be a corner case since it would pretty much be a preset for lossless encoding. */
5494 if ([[chosenPreset objectForKey:@"VideoQualitySlider"] floatValue] < 1.0)
5496 /* For the quality slider we need to convert the old percent's to the new rf scales */
5497 float rf = (([fVidQualitySlider maxValue] - [fVidQualitySlider minValue]) * [[chosenPreset objectForKey:@"VideoQualitySlider"] floatValue]);
5498 [fVidQualitySlider setFloatValue:rf];
5503 /* Since theora's qp value goes up from left to right, we can just set the slider float value */
5504 if ([[fVidEncoderPopUp selectedItem] tag] == HB_VCODEC_THEORA)
5506 [fVidQualitySlider setFloatValue:[[chosenPreset objectForKey:@"VideoQualitySlider"] floatValue]];
5510 /* since ffmpeg and x264 use an "inverted" slider (lower qp/rf values indicate a higher quality) we invert the value on the slider */
5511 [fVidQualitySlider setFloatValue:([fVidQualitySlider maxValue] + [fVidQualitySlider minValue]) - [[chosenPreset objectForKey:@"VideoQualitySlider"] floatValue]];
5515 [self videoMatrixChanged:nil];
5517 /* Video framerate */
5518 /* For video preset video framerate, we want to make sure that Same as source does not conflict with the
5519 detected framerate in the fVidRatePopUp so we use index 0*/
5520 if ([[chosenPreset objectForKey:@"VideoFramerate"] isEqualToString:@"Same as source"])
5522 [fVidRatePopUp selectItemAtIndex: 0];
5526 [fVidRatePopUp selectItemWithTitle:[chosenPreset objectForKey:@"VideoFramerate"]];
5529 [fFrameratePfrCheck setState:[[chosenPreset objectForKey:@"VideoFrameratePFR"] intValue]];
5530 [self videoFrameRateChanged:nil];
5532 /* 2 Pass Encoding */
5533 [fVidTwoPassCheck setState:[[chosenPreset objectForKey:@"VideoTwoPass"] intValue]];
5534 [self twoPassCheckboxChanged:nil];
5536 /* Turbo 1st pass for 2 Pass Encoding */
5537 [fVidTurboPassCheck setState:[[chosenPreset objectForKey:@"VideoTurboTwoPass"] intValue]];
5540 [fAudioDelegate addTracksFromPreset: chosenPreset];
5543 [fSubPopUp selectItemWithTitle:[chosenPreset objectForKey:@"Subtitles"]];
5544 /* Forced Subtitles */
5545 [fSubForcedCheck setState:[[chosenPreset objectForKey:@"SubtitlesForced"] intValue]];
5547 /* Picture Settings */
5548 /* Note: objectForKey:@"UsesPictureSettings" refers to picture size, which encompasses:
5549 * height, width, keep ar, anamorphic and crop settings.
5550 * picture filters are handled separately below.
5552 /* Check to see if the objectForKey:@"UsesPictureSettings is greater than 0, as 0 means use picture sizing "None"
5553 * ( 2 is use max for source and 1 is use exact size when the preset was created ) and the
5554 * preset completely ignores any picture sizing values in the preset.
5556 if ([[chosenPreset objectForKey:@"UsesPictureSettings"] intValue] > 0)
5558 hb_job_t * job = fTitle->job;
5560 /* If Cropping is set to custom, then recall all four crop values from
5561 when the preset was created and apply them */
5562 if ([[chosenPreset objectForKey:@"PictureAutoCrop"] intValue] == 0)
5564 [fPictureController setAutoCrop:NO];
5566 /* Here we use the custom crop values saved at the time the preset was saved */
5567 job->crop[0] = [[chosenPreset objectForKey:@"PictureTopCrop"] intValue];
5568 job->crop[1] = [[chosenPreset objectForKey:@"PictureBottomCrop"] intValue];
5569 job->crop[2] = [[chosenPreset objectForKey:@"PictureLeftCrop"] intValue];
5570 job->crop[3] = [[chosenPreset objectForKey:@"PictureRightCrop"] intValue];
5573 else /* if auto crop has been saved in preset, set to auto and use post scan auto crop */
5575 [fPictureController setAutoCrop:YES];
5576 /* Here we use the auto crop values determined right after scan */
5577 job->crop[0] = AutoCropTop;
5578 job->crop[1] = AutoCropBottom;
5579 job->crop[2] = AutoCropLeft;
5580 job->crop[3] = AutoCropRight;
5585 if ([chosenPreset objectForKey:@"PictureModulus"])
5587 job->modulus = [[chosenPreset objectForKey:@"PictureModulus"] intValue];
5594 /* Check to see if the objectForKey:@"UsesPictureSettings is 2 which is "Use Max for the source */
5595 if ([[chosenPreset objectForKey:@"UsesPictureSettings"] intValue] == 2 || [[chosenPreset objectForKey:@"UsesMaxPictureSettings"] intValue] == 1)
5597 /* Use Max Picture settings for whatever the dvd is.*/
5598 [self revertPictureSizeToMax:nil];
5599 job->keep_ratio = [[chosenPreset objectForKey:@"PictureKeepRatio"] intValue];
5600 if (job->keep_ratio == 1)
5602 hb_fix_aspect( job, HB_KEEP_WIDTH );
5603 if( job->height > fTitle->height )
5605 job->height = fTitle->height;
5606 hb_fix_aspect( job, HB_KEEP_HEIGHT );
5609 job->anamorphic.mode = [[chosenPreset objectForKey:@"PicturePAR"] intValue];
5611 else // /* If not 0 or 2 we assume objectForKey:@"UsesPictureSettings is 1 which is "Use picture sizing from when the preset was set" */
5613 /* we check to make sure the presets width/height does not exceed the sources width/height */
5614 if (fTitle->width < [[chosenPreset objectForKey:@"PictureWidth"] intValue] || fTitle->height < [[chosenPreset objectForKey:@"PictureHeight"] intValue])
5616 /* if so, then we use the sources height and width to avoid scaling up */
5617 //job->width = fTitle->width;
5618 //job->height = fTitle->height;
5619 [self revertPictureSizeToMax:nil];
5621 else // source width/height is >= the preset height/width
5623 /* we can go ahead and use the presets values for height and width */
5624 job->width = [[chosenPreset objectForKey:@"PictureWidth"] intValue];
5625 job->height = [[chosenPreset objectForKey:@"PictureHeight"] intValue];
5627 job->keep_ratio = [[chosenPreset objectForKey:@"PictureKeepRatio"] intValue];
5628 if (job->keep_ratio == 1)
5630 int height = fTitle->height;
5632 if ( job->height && job->height < fTitle->height )
5633 height = job->height;
5635 hb_fix_aspect( job, HB_KEEP_WIDTH );
5636 // Make sure the resulting height is less than
5637 // the title height and less than the height
5638 // requested in the preset.
5639 if( job->height > height )
5641 job->height = height;
5642 hb_fix_aspect( job, HB_KEEP_HEIGHT );
5645 job->anamorphic.mode = [[chosenPreset objectForKey:@"PicturePAR"] intValue];
5646 if ( job->anamorphic.mode > 0 )
5648 int w, h, par_w, par_h;
5650 job->anamorphic.par_width = fTitle->pixel_aspect_width;
5651 job->anamorphic.par_height = fTitle->pixel_aspect_height;
5652 job->maxWidth = job->width;
5653 job->maxHeight = job->height;
5654 hb_set_anamorphic_size( job, &w, &h, &par_w, &par_h );
5665 /* If the preset has an objectForKey:@"UsesPictureFilters", and handle the filters here */
5666 if ([chosenPreset objectForKey:@"UsesPictureFilters"] && [[chosenPreset objectForKey:@"UsesPictureFilters"] intValue] > 0)
5670 /* We only allow *either* Decomb or Deinterlace. So check for the PictureDecombDeinterlace key.
5671 * also, older presets may not have this key, in which case we also check to see if that preset had PictureDecomb
5672 * specified, in which case we use decomb and ignore any possible Deinterlace settings as using both was less than
5675 [fPictureController setUseDecomb:1];
5676 [fPictureController setDecomb:0];
5677 [fPictureController setDeinterlace:0];
5678 if ([[chosenPreset objectForKey:@"PictureDecombDeinterlace"] intValue] == 1 || [[chosenPreset objectForKey:@"PictureDecomb"] intValue] > 0)
5680 /* we are using decomb */
5682 if ([[chosenPreset objectForKey:@"PictureDecomb"] intValue] > 0)
5684 [fPictureController setDecomb:[[chosenPreset objectForKey:@"PictureDecomb"] intValue]];
5686 /* if we are using "Custom" in the decomb setting, also set the custom string*/
5687 if ([[chosenPreset objectForKey:@"PictureDecomb"] intValue] == 1)
5689 [fPictureController setDecombCustomString:[chosenPreset objectForKey:@"PictureDecombCustom"]];
5695 /* We are using Deinterlace */
5697 if ([[chosenPreset objectForKey:@"PictureDeinterlace"] intValue] > 0)
5699 [fPictureController setUseDecomb:0];
5700 [fPictureController setDeinterlace:[[chosenPreset objectForKey:@"PictureDeinterlace"] intValue]];
5701 /* if we are using "Custom" in the deinterlace setting, also set the custom string*/
5702 if ([[chosenPreset objectForKey:@"PictureDeinterlace"] intValue] == 1)
5704 [fPictureController setDeinterlaceCustomString:[chosenPreset objectForKey:@"PictureDeinterlaceCustom"]];
5711 if ([[chosenPreset objectForKey:@"PictureDetelecine"] intValue] > 0)
5713 [fPictureController setDetelecine:[[chosenPreset objectForKey:@"PictureDetelecine"] intValue]];
5714 /* if we are using "Custom" in the detelecine setting, also set the custom string*/
5715 if ([[chosenPreset objectForKey:@"PictureDetelecine"] intValue] == 1)
5717 [fPictureController setDetelecineCustomString:[chosenPreset objectForKey:@"PictureDetelecineCustom"]];
5722 [fPictureController setDetelecine:0];
5726 if ([[chosenPreset objectForKey:@"PictureDenoise"] intValue] > 0)
5728 [fPictureController setDenoise:[[chosenPreset objectForKey:@"PictureDenoise"] intValue]];
5729 /* if we are using "Custom" in the denoise setting, also set the custom string*/
5730 if ([[chosenPreset objectForKey:@"PictureDenoise"] intValue] == 1)
5732 [fPictureController setDenoiseCustomString:[chosenPreset objectForKey:@"PictureDenoiseCustom"]];
5737 [fPictureController setDenoise:0];
5741 if ([[chosenPreset objectForKey:@"PictureDeblock"] intValue] == 1)
5743 /* if its a one, then its the old on/off deblock, set on to 5*/
5744 [fPictureController setDeblock:5];
5748 /* use the settings intValue */
5749 [fPictureController setDeblock:[[chosenPreset objectForKey:@"PictureDeblock"] intValue]];
5752 if ([[chosenPreset objectForKey:@"VideoGrayScale"] intValue] == 1)
5754 [fPictureController setGrayscale:1];
5758 [fPictureController setGrayscale:0];
5761 /* we call SetTitle: in fPictureController so we get an instant update in the Picture Settings window */
5762 [fPictureController SetTitle:fTitle];
5763 [fPictureController SetTitle:fTitle];
5764 [self calculatePictureSizing:nil];
5770 #pragma mark Manage Presets
5772 - (void) loadPresets {
5773 /* We declare the default NSFileManager into fileManager */
5774 NSFileManager * fileManager = [NSFileManager defaultManager];
5775 /*We define the location of the user presets file */
5776 UserPresetsFile = @"~/Library/Application Support/HandBrake/UserPresets.plist";
5777 UserPresetsFile = [[UserPresetsFile stringByExpandingTildeInPath]retain];
5778 /* We check for the presets.plist */
5779 if ([fileManager fileExistsAtPath:UserPresetsFile] == 0)
5781 [fileManager createFileAtPath:UserPresetsFile contents:nil attributes:nil];
5784 UserPresets = [[NSMutableArray alloc] initWithContentsOfFile:UserPresetsFile];
5785 if (nil == UserPresets)
5787 UserPresets = [[NSMutableArray alloc] init];
5788 [self addFactoryPresets:nil];
5790 [fPresetsOutlineView reloadData];
5792 [self checkBuiltInsForUpdates];
5795 - (void) checkBuiltInsForUpdates {
5797 BOOL updateBuiltInPresets = NO;
5799 NSEnumerator *enumerator = [UserPresets objectEnumerator];
5801 while (tempObject = [enumerator nextObject])
5803 /* iterate through the built in presets to see if any have an old build number */
5804 NSMutableDictionary *thisPresetDict = tempObject;
5805 /*Key Type == 0 is built in, and key PresetBuildNumber is the build number it was created with */
5806 if ([[thisPresetDict objectForKey:@"Type"] intValue] == 0)
5808 if (![thisPresetDict objectForKey:@"PresetBuildNumber"] || [[thisPresetDict objectForKey:@"PresetBuildNumber"] intValue] < [[[[NSBundle mainBundle] infoDictionary] objectForKey:@"CFBundleVersion"] intValue])
5810 updateBuiltInPresets = YES;
5815 /* if we have built in presets to update, then do so AlertBuiltInPresetUpdate*/
5816 if ( updateBuiltInPresets == YES)
5818 if( [[NSUserDefaults standardUserDefaults] boolForKey:@"AlertBuiltInPresetUpdate"] == YES)
5820 /* Show an alert window that built in presets will be updated */
5821 /*On Screen Notification*/
5824 status = NSRunAlertPanel(@"HandBrake has determined your built in presets are out of date...",@"HandBrake will now update your built-in presets.", @"OK", nil, nil);
5825 [NSApp requestUserAttention:NSCriticalRequest];
5827 /* when alert is dismissed, go ahead and update the built in presets */
5828 [self addFactoryPresets:nil];
5834 - (IBAction) addPresetPicDropdownChanged: (id) sender
5836 if ([fPresetNewPicSettingsPopUp indexOfSelectedItem] == 1)
5838 [fPresetNewPicWidthHeightBox setHidden:NO];
5842 [fPresetNewPicWidthHeightBox setHidden:YES];
5846 - (IBAction) showAddPresetPanel: (id) sender
5848 /* Deselect the currently selected Preset if there is one*/
5849 [fPresetsOutlineView deselectRow:[fPresetsOutlineView selectedRow]];
5851 /* Populate the preset picture settings popup here */
5852 [fPresetNewPicSettingsPopUp removeAllItems];
5853 [fPresetNewPicSettingsPopUp addItemWithTitle:@"None"];
5854 [fPresetNewPicSettingsPopUp addItemWithTitle:@"Custom"];
5855 [fPresetNewPicSettingsPopUp addItemWithTitle:@"Source Maximum (post source scan)"];
5856 [fPresetNewPicSettingsPopUp selectItemAtIndex: 0];
5857 /* Uncheck the preset use filters checkbox */
5858 [fPresetNewPicFiltersCheck setState:NSOffState];
5859 // fPresetNewFolderCheck
5860 [fPresetNewFolderCheck setState:NSOffState];
5861 /* Erase info from the input fields*/
5862 [fPresetNewName setStringValue: @""];
5863 [fPresetNewDesc setStringValue: @""];
5865 /* Initialize custom height and width settings to current values */
5867 [fPresetNewPicWidth setStringValue: [NSString stringWithFormat:@"%d",fTitle->job->width]];
5868 [fPresetNewPicHeight setStringValue: [NSString stringWithFormat:@"%d",fTitle->job->height]];
5869 [self addPresetPicDropdownChanged:nil];
5870 /* Show the panel */
5871 [NSApp beginSheet:fAddPresetPanel modalForWindow:fWindow modalDelegate:nil didEndSelector:NULL contextInfo:NULL];
5874 - (IBAction) closeAddPresetPanel: (id) sender
5876 [NSApp endSheet: fAddPresetPanel];
5877 [fAddPresetPanel orderOut: self];
5880 - (IBAction)addUserPreset:(id)sender
5882 if (![[fPresetNewName stringValue] length])
5883 NSRunAlertPanel(@"Warning!", @"You need to insert a name for the preset.", @"OK", nil , nil);
5886 /* Here we create a custom user preset */
5887 [UserPresets addObject:[self createPreset]];
5890 [self closeAddPresetPanel:nil];
5897 /* We Reload the New Table data for presets */
5898 [fPresetsOutlineView reloadData];
5899 /* We save all of the preset data here */
5907 /* We Sort the Presets By Factory or Custom */
5908 NSSortDescriptor * presetTypeDescriptor=[[[NSSortDescriptor alloc] initWithKey:@"Type"
5909 ascending:YES] autorelease];
5910 /* We Sort the Presets Alphabetically by name We do not use this now as we have drag and drop*/
5912 NSSortDescriptor * presetNameDescriptor=[[[NSSortDescriptor alloc] initWithKey:@"PresetName"
5913 ascending:YES selector:@selector(caseInsensitiveCompare:)] autorelease];
5914 //NSArray *sortDescriptors=[NSArray arrayWithObjects:presetTypeDescriptor,presetNameDescriptor,nil];
5917 /* Since we can drag and drop our custom presets, lets just sort by type and not name */
5918 NSArray *sortDescriptors=[NSArray arrayWithObjects:presetTypeDescriptor,nil];
5919 NSArray *sortedArray=[UserPresets sortedArrayUsingDescriptors:sortDescriptors];
5920 [UserPresets setArray:sortedArray];
5925 - (IBAction)insertPreset:(id)sender
5927 int index = [fPresetsOutlineView selectedRow];
5928 [UserPresets insertObject:[self createPreset] atIndex:index];
5929 [fPresetsOutlineView reloadData];
5933 - (NSDictionary *)createPreset
5935 NSMutableDictionary *preset = [[NSMutableDictionary alloc] init];
5936 /* Preset build number */
5937 [preset setObject:[NSString stringWithFormat: @"%d", [[[[NSBundle mainBundle] infoDictionary] objectForKey:@"CFBundleVersion"] intValue]] forKey:@"PresetBuildNumber"];
5938 [preset setObject:[fPresetNewName stringValue] forKey:@"PresetName"];
5939 /* Get the New Preset Name from the field in the AddPresetPanel */
5940 [preset setObject:[fPresetNewName stringValue] forKey:@"PresetName"];
5941 /* Set whether or not this is to be a folder fPresetNewFolderCheck*/
5942 [preset setObject:[NSNumber numberWithBool:[fPresetNewFolderCheck state]] forKey:@"Folder"];
5943 /*Set whether or not this is a user preset or factory 0 is factory, 1 is user*/
5944 [preset setObject:[NSNumber numberWithInt:1] forKey:@"Type"];
5945 /*Set whether or not this is default, at creation set to 0*/
5946 [preset setObject:[NSNumber numberWithInt:0] forKey:@"Default"];
5947 if ([fPresetNewFolderCheck state] == YES)
5949 /* initialize and set an empty array for children here since we are a new folder */
5950 NSMutableArray *childrenArray = [[NSMutableArray alloc] init];
5951 [preset setObject:[NSMutableArray arrayWithArray: childrenArray] forKey:@"ChildrenArray"];
5952 [childrenArray autorelease];
5954 else // we are not creating a preset folder, so we go ahead with the rest of the preset info
5956 /*Get the whether or not to apply pic Size and Cropping (includes Anamorphic)*/
5957 [preset setObject:[NSNumber numberWithInt:[fPresetNewPicSettingsPopUp indexOfSelectedItem]] forKey:@"UsesPictureSettings"];
5958 /* Get whether or not to use the current Picture Filter settings for the preset */
5959 [preset setObject:[NSNumber numberWithInt:[fPresetNewPicFiltersCheck state]] forKey:@"UsesPictureFilters"];
5961 /* Get New Preset Description from the field in the AddPresetPanel*/
5962 [preset setObject:[fPresetNewDesc stringValue] forKey:@"PresetDescription"];
5964 [preset setObject:[fDstFormatPopUp titleOfSelectedItem] forKey:@"FileFormat"];
5965 /* Chapter Markers fCreateChapterMarkers*/
5966 [preset setObject:[NSNumber numberWithInt:[fCreateChapterMarkers state]] forKey:@"ChapterMarkers"];
5967 /* Allow Mpeg4 64 bit formatting +4GB file sizes */
5968 [preset setObject:[NSNumber numberWithInt:[fDstMp4LargeFileCheck state]] forKey:@"Mp4LargeFile"];
5969 /* Mux mp4 with http optimization */
5970 [preset setObject:[NSNumber numberWithInt:[fDstMp4HttpOptFileCheck state]] forKey:@"Mp4HttpOptimize"];
5971 /* Add iPod uuid atom */
5972 [preset setObject:[NSNumber numberWithInt:[fDstMp4iPodFileCheck state]] forKey:@"Mp4iPodCompatible"];
5976 [preset setObject:[fVidEncoderPopUp titleOfSelectedItem] forKey:@"VideoEncoder"];
5977 /* x264 Option String */
5978 [preset setObject:[fAdvancedOptions optionsString] forKey:@"x264Option"];
5980 [preset setObject:[NSNumber numberWithInt:[fVidQualityMatrix selectedRow]] forKey:@"VideoQualityType"];
5981 [preset setObject:[fVidTargetSizeField stringValue] forKey:@"VideoTargetSize"];
5982 [preset setObject:[fVidBitrateField stringValue] forKey:@"VideoAvgBitrate"];
5983 [preset setObject:[NSNumber numberWithFloat:[fVidQualityRFField floatValue]] forKey:@"VideoQualitySlider"];
5985 /* Video framerate */
5986 if ([fVidRatePopUp indexOfSelectedItem] == 0) // Same as source is selected
5988 [preset setObject:@"Same as source" forKey:@"VideoFramerate"];
5990 else // we can record the actual titleOfSelectedItem
5992 [preset setObject:[fVidRatePopUp titleOfSelectedItem] forKey:@"VideoFramerate"];
5994 [preset setObject:[NSNumber numberWithInt:[fFrameratePfrCheck state]] forKey:@"VideoFrameratePFR"];
5996 /* 2 Pass Encoding */
5997 [preset setObject:[NSNumber numberWithInt:[fVidTwoPassCheck state]] forKey:@"VideoTwoPass"];
5998 /* Turbo 2 pass Encoding fVidTurboPassCheck*/
5999 [preset setObject:[NSNumber numberWithInt:[fVidTurboPassCheck state]] forKey:@"VideoTurboTwoPass"];
6000 /*Picture Settings*/
6001 hb_job_t * job = fTitle->job;
6003 /* Picture Sizing */
6004 [preset setObject:[NSNumber numberWithInt:0] forKey:@"UsesMaxPictureSettings"];
6005 [preset setObject:[NSNumber numberWithInt:[fPresetNewPicWidth intValue]] forKey:@"PictureWidth"];
6006 [preset setObject:[NSNumber numberWithInt:[fPresetNewPicHeight intValue]] forKey:@"PictureHeight"];
6007 [preset setObject:[NSNumber numberWithInt:fTitle->job->keep_ratio] forKey:@"PictureKeepRatio"];
6008 [preset setObject:[NSNumber numberWithInt:fTitle->job->anamorphic.mode] forKey:@"PicturePAR"];
6009 [preset setObject:[NSNumber numberWithInt:fTitle->job->modulus] forKey:@"PictureModulus"];
6011 /* Set crop settings here */
6012 [preset setObject:[NSNumber numberWithInt:[fPictureController autoCrop]] forKey:@"PictureAutoCrop"];
6013 [preset setObject:[NSNumber numberWithInt:job->crop[0]] forKey:@"PictureTopCrop"];
6014 [preset setObject:[NSNumber numberWithInt:job->crop[1]] forKey:@"PictureBottomCrop"];
6015 [preset setObject:[NSNumber numberWithInt:job->crop[2]] forKey:@"PictureLeftCrop"];
6016 [preset setObject:[NSNumber numberWithInt:job->crop[3]] forKey:@"PictureRightCrop"];
6018 /* Picture Filters */
6019 [preset setObject:[NSNumber numberWithInt:[fPictureController useDecomb]] forKey:@"PictureDecombDeinterlace"];
6020 [preset setObject:[NSNumber numberWithInt:[fPictureController deinterlace]] forKey:@"PictureDeinterlace"];
6021 [preset setObject:[fPictureController deinterlaceCustomString] forKey:@"PictureDeinterlaceCustom"];
6022 [preset setObject:[NSNumber numberWithInt:[fPictureController detelecine]] forKey:@"PictureDetelecine"];
6023 [preset setObject:[fPictureController detelecineCustomString] forKey:@"PictureDetelecineCustom"];
6024 [preset setObject:[NSNumber numberWithInt:[fPictureController denoise]] forKey:@"PictureDenoise"];
6025 [preset setObject:[fPictureController denoiseCustomString] forKey:@"PictureDenoiseCustom"];
6026 [preset setObject:[NSNumber numberWithInt:[fPictureController deblock]] forKey:@"PictureDeblock"];
6027 [preset setObject:[NSNumber numberWithInt:[fPictureController decomb]] forKey:@"PictureDecomb"];
6028 [preset setObject:[fPictureController decombCustomString] forKey:@"PictureDecombCustom"];
6029 [preset setObject:[NSNumber numberWithInt:[fPictureController grayscale]] forKey:@"VideoGrayScale"];
6032 NSMutableArray *audioListArray = [[NSMutableArray alloc] init];
6033 [fAudioDelegate prepareAudioForPreset: audioListArray];
6036 [preset setObject:[NSMutableArray arrayWithArray: audioListArray] forKey:@"AudioList"];
6039 /* Temporarily remove subtitles from creating a new preset as it has to be converted over to use the new
6040 * subititle array code. */
6042 //[preset setObject:[fSubPopUp titleOfSelectedItem] forKey:@"Subtitles"];
6043 /* Forced Subtitles */
6044 //[preset setObject:[NSNumber numberWithInt:[fSubForcedCheck state]] forKey:@"SubtitlesForced"];
6046 [preset autorelease];
6053 [UserPresets writeToFile:UserPresetsFile atomically:YES];
6054 /* We get the default preset in case it changed */
6055 [self getDefaultPresets:nil];
6059 - (IBAction)deletePreset:(id)sender
6063 if ( [fPresetsOutlineView numberOfSelectedRows] == 0 )
6067 /* Alert user before deleting preset */
6069 status = NSRunAlertPanel(@"Warning!", @"Are you sure that you want to delete the selected preset?", @"OK", @"Cancel", nil);
6071 if ( status == NSAlertDefaultReturn )
6073 int presetToModLevel = [fPresetsOutlineView levelForItem: [fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]]];
6074 NSDictionary *presetToMod = [fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]];
6075 NSDictionary *presetToModParent = [fPresetsOutlineView parentForItem: presetToMod];
6077 NSEnumerator *enumerator;
6078 NSMutableArray *presetsArrayToMod;
6079 NSMutableArray *tempArray;
6081 /* If we are a root level preset, we are modding the UserPresets array */
6082 if (presetToModLevel == 0)
6084 presetsArrayToMod = UserPresets;
6086 else // We have a parent preset, so we modify the chidren array object for key
6088 presetsArrayToMod = [presetToModParent objectForKey:@"ChildrenArray"];
6091 enumerator = [presetsArrayToMod objectEnumerator];
6092 tempArray = [NSMutableArray array];
6094 while (tempObject = [enumerator nextObject])
6096 NSDictionary *thisPresetDict = tempObject;
6097 if (thisPresetDict == presetToMod)
6099 [tempArray addObject:tempObject];
6103 [presetsArrayToMod removeObjectsInArray:tempArray];
6104 [fPresetsOutlineView reloadData];
6111 #pragma mark Import Export Preset(s)
6113 - (IBAction) browseExportPresetFile: (id) sender
6115 /* Open a panel to let the user choose where and how to save the export file */
6116 NSSavePanel * panel = [NSSavePanel savePanel];
6117 /* We get the current file name and path from the destination field here */
6118 NSString *defaultExportDirectory = [NSString stringWithFormat: @"%@/Desktop/", NSHomeDirectory()];
6120 [panel beginSheetForDirectory: defaultExportDirectory file: @"HB_Export.plist"
6121 modalForWindow: fWindow modalDelegate: self
6122 didEndSelector: @selector( browseExportPresetFileDone:returnCode:contextInfo: )
6126 - (void) browseExportPresetFileDone: (NSSavePanel *) sheet
6127 returnCode: (int) returnCode contextInfo: (void *) contextInfo
6129 if( returnCode == NSOKButton )
6131 NSString *presetExportDirectory = [[sheet filename] stringByDeletingLastPathComponent];
6132 NSString *exportPresetsFile = [sheet filename];
6133 [[NSUserDefaults standardUserDefaults] setObject:presetExportDirectory forKey:@"LastPresetExportDirectory"];
6134 /* We check for the presets.plist */
6135 if ([[NSFileManager defaultManager] fileExistsAtPath:exportPresetsFile] == 0)
6137 [[NSFileManager defaultManager] createFileAtPath:exportPresetsFile contents:nil attributes:nil];
6139 NSMutableArray * presetsToExport = [[NSMutableArray alloc] initWithContentsOfFile:exportPresetsFile];
6140 if (nil == presetsToExport)
6142 presetsToExport = [[NSMutableArray alloc] init];
6144 /* now get and add selected presets to export */
6147 if (YES == [self hasValidPresetSelected])
6149 [presetsToExport addObject:[fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]]];
6150 [presetsToExport writeToFile:exportPresetsFile atomically:YES];
6158 - (IBAction) browseImportPresetFile: (id) sender
6161 NSOpenPanel * panel;
6163 panel = [NSOpenPanel openPanel];
6164 [panel setAllowsMultipleSelection: NO];
6165 [panel setCanChooseFiles: YES];
6166 [panel setCanChooseDirectories: NO ];
6167 NSString * sourceDirectory;
6168 if ([[NSUserDefaults standardUserDefaults] stringForKey:@"LastPresetImportDirectory"])
6170 sourceDirectory = [[NSUserDefaults standardUserDefaults] stringForKey:@"LastPresetImportDirectory"];
6174 sourceDirectory = @"~/Desktop";
6175 sourceDirectory = [sourceDirectory stringByExpandingTildeInPath];
6177 /* we open up the browse sources sheet here and call for browseSourcesDone after the sheet is closed
6178 * to evaluate whether we want to specify a title, we pass the sender in the contextInfo variable
6180 /* set this for allowed file types, not sure if we should allow xml or not */
6181 NSArray *fileTypes = [NSArray arrayWithObjects:@"plist", @"xml", nil];
6182 [panel beginSheetForDirectory: sourceDirectory file: nil types: fileTypes
6183 modalForWindow: fWindow modalDelegate: self
6184 didEndSelector: @selector( browseImportPresetDone:returnCode:contextInfo: )
6185 contextInfo: sender];
6188 - (void) browseImportPresetDone: (NSSavePanel *) sheet
6189 returnCode: (int) returnCode contextInfo: (void *) contextInfo
6191 if( returnCode == NSOKButton )
6193 NSString *importPresetsDirectory = [[sheet filename] stringByDeletingLastPathComponent];
6194 NSString *importPresetsFile = [sheet filename];
6195 [[NSUserDefaults standardUserDefaults] setObject:importPresetsDirectory forKey:@"LastPresetImportDirectory"];
6196 /* NOTE: here we need to do some sanity checking to verify we do not hose up our presets file */
6197 NSMutableArray * presetsToImport = [[NSMutableArray alloc] initWithContentsOfFile:importPresetsFile];
6198 /* iterate though the new array of presets to import and add them to our presets array */
6200 NSEnumerator *enumerator = [presetsToImport objectEnumerator];
6202 while (tempObject = [enumerator nextObject])
6204 /* make any changes to the incoming preset we see fit */
6205 /* make sure the incoming preset is not tagged as default */
6206 [tempObject setObject:[NSNumber numberWithInt:0] forKey:@"Default"];
6207 /* prepend "(imported) to the name of the incoming preset for clarification since it can be changed */
6208 NSString * prependedName = [@"(import) " stringByAppendingString:[tempObject objectForKey:@"PresetName"]] ;
6209 [tempObject setObject:prependedName forKey:@"PresetName"];
6211 /* actually add the new preset to our presets array */
6212 [UserPresets addObject:tempObject];
6215 [presetsToImport autorelease];
6223 #pragma mark Manage Default Preset
6225 - (IBAction)getDefaultPresets:(id)sender
6227 presetHbDefault = nil;
6228 presetUserDefault = nil;
6229 presetUserDefaultParent = nil;
6230 presetUserDefaultParentParent = nil;
6231 NSMutableDictionary *presetHbDefaultParent = nil;
6232 NSMutableDictionary *presetHbDefaultParentParent = nil;
6235 BOOL userDefaultFound = NO;
6236 presetCurrentBuiltInCount = 0;
6237 /* First we iterate through the root UserPresets array to check for defaults */
6238 NSEnumerator *enumerator = [UserPresets objectEnumerator];
6240 while (tempObject = [enumerator nextObject])
6242 NSMutableDictionary *thisPresetDict = tempObject;
6243 if ([[thisPresetDict objectForKey:@"Default"] intValue] == 1) // 1 is HB default
6245 presetHbDefault = thisPresetDict;
6247 if ([[thisPresetDict objectForKey:@"Default"] intValue] == 2) // 2 is User specified default
6249 presetUserDefault = thisPresetDict;
6250 userDefaultFound = YES;
6252 if ([[thisPresetDict objectForKey:@"Type"] intValue] == 0) // Type 0 is a built in preset
6254 presetCurrentBuiltInCount++; // <--increment the current number of built in presets
6258 /* if we run into a folder, go to level 1 and iterate through the children arrays for the default */
6259 if ([thisPresetDict objectForKey:@"ChildrenArray"])
6261 NSMutableDictionary *thisPresetDictParent = thisPresetDict;
6262 NSEnumerator *enumerator = [[thisPresetDict objectForKey:@"ChildrenArray"] objectEnumerator];
6264 while (tempObject = [enumerator nextObject])
6266 NSMutableDictionary *thisPresetDict = tempObject;
6267 if ([[thisPresetDict objectForKey:@"Default"] intValue] == 1) // 1 is HB default
6269 presetHbDefault = thisPresetDict;
6270 presetHbDefaultParent = thisPresetDictParent;
6272 if ([[thisPresetDict objectForKey:@"Default"] intValue] == 2) // 2 is User specified default
6274 presetUserDefault = thisPresetDict;
6275 presetUserDefaultParent = thisPresetDictParent;
6276 userDefaultFound = YES;
6279 /* if we run into a folder, go to level 2 and iterate through the children arrays for the default */
6280 if ([thisPresetDict objectForKey:@"ChildrenArray"])
6282 NSMutableDictionary *thisPresetDictParentParent = thisPresetDict;
6283 NSEnumerator *enumerator = [[thisPresetDict objectForKey:@"ChildrenArray"] objectEnumerator];
6285 while (tempObject = [enumerator nextObject])
6287 NSMutableDictionary *thisPresetDict = tempObject;
6288 if ([[thisPresetDict objectForKey:@"Default"] intValue] == 1) // 1 is HB default
6290 presetHbDefault = thisPresetDict;
6291 presetHbDefaultParent = thisPresetDictParent;
6292 presetHbDefaultParentParent = thisPresetDictParentParent;
6294 if ([[thisPresetDict objectForKey:@"Default"] intValue] == 2) // 2 is User specified default
6296 presetUserDefault = thisPresetDict;
6297 presetUserDefaultParent = thisPresetDictParent;
6298 presetUserDefaultParentParent = thisPresetDictParentParent;
6299 userDefaultFound = YES;
6308 /* check to see if a user specified preset was found, if not then assign the parents for
6309 * the presetHbDefault so that we can open the parents for the nested presets
6311 if (userDefaultFound == NO)
6313 presetUserDefaultParent = presetHbDefaultParent;
6314 presetUserDefaultParentParent = presetHbDefaultParentParent;
6318 - (IBAction)setDefaultPreset:(id)sender
6320 /* We need to determine if the item is a folder */
6321 if ([[[fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]] objectForKey:@"Folder"] intValue] == 1)
6327 NSEnumerator *enumerator = [UserPresets objectEnumerator];
6329 /* First make sure the old user specified default preset is removed */
6330 while (tempObject = [enumerator nextObject])
6332 NSMutableDictionary *thisPresetDict = tempObject;
6333 if ([[tempObject objectForKey:@"Default"] intValue] != 1) // if not the default HB Preset, set to 0
6335 [[UserPresets objectAtIndex:i] setObject:[NSNumber numberWithInt:0] forKey:@"Default"];
6338 /* if we run into a folder, go to level 1 and iterate through the children arrays for the default */
6339 if ([thisPresetDict objectForKey:@"ChildrenArray"])
6341 NSEnumerator *enumerator = [[thisPresetDict objectForKey:@"ChildrenArray"] objectEnumerator];
6344 while (tempObject = [enumerator nextObject])
6346 NSMutableDictionary *thisPresetDict1 = tempObject;
6347 if ([[tempObject objectForKey:@"Default"] intValue] != 1) // if not the default HB Preset, set to 0
6349 [[[thisPresetDict objectForKey:@"ChildrenArray"] objectAtIndex:ii] setObject:[NSNumber numberWithInt:0] forKey:@"Default"];
6351 /* if we run into a folder, go to level 2 and iterate through the children arrays for the default */
6352 if ([thisPresetDict1 objectForKey:@"ChildrenArray"])
6354 NSEnumerator *enumerator = [[thisPresetDict1 objectForKey:@"ChildrenArray"] objectEnumerator];
6357 while (tempObject = [enumerator nextObject])
6359 if ([[tempObject objectForKey:@"Default"] intValue] != 1) // if not the default HB Preset, set to 0
6361 [[[thisPresetDict1 objectForKey:@"ChildrenArray"] objectAtIndex:iii] setObject:[NSNumber numberWithInt:0] forKey:@"Default"];
6374 int presetToModLevel = [fPresetsOutlineView levelForItem: [fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]]];
6375 NSDictionary *presetToMod = [fPresetsOutlineView itemAtRow:[fPresetsOutlineView selectedRow]];
6376 NSDictionary *presetToModParent = [fPresetsOutlineView parentForItem: presetToMod];
6379 NSMutableArray *presetsArrayToMod;
6380 NSMutableArray *tempArray;
6382 /* If we are a root level preset, we are modding the UserPresets array */
6383 if (presetToModLevel == 0)
6385 presetsArrayToMod = UserPresets;
6387 else // We have a parent preset, so we modify the chidren array object for key
6389 presetsArrayToMod = [presetToModParent objectForKey:@"ChildrenArray"];
6392 enumerator = [presetsArrayToMod objectEnumerator];
6393 tempArray = [NSMutableArray array];
6395 while (tempObject = [enumerator nextObject])
6397 NSDictionary *thisPresetDict = tempObject;
6398 if (thisPresetDict == presetToMod)
6400 if ([[tempObject objectForKey:@"Default"] intValue] != 1) // if not the default HB Preset, set to 2
6402 [[presetsArrayToMod objectAtIndex:iiii] setObject:[NSNumber numberWithInt:2] forKey:@"Default"];
6409 /* We save all of the preset data here */
6411 /* We Reload the New Table data for presets */
6412 [fPresetsOutlineView reloadData];
6415 - (IBAction)selectDefaultPreset:(id)sender
6417 NSMutableDictionary *presetToMod;
6418 /* if there is a user specified default, we use it */
6419 if (presetUserDefault)
6421 presetToMod = presetUserDefault;
6423 else if (presetHbDefault) //else we use the built in default presetHbDefault
6425 presetToMod = presetHbDefault;
6432 if (presetUserDefaultParent != nil)
6434 [fPresetsOutlineView expandItem:presetUserDefaultParent];
6437 if (presetUserDefaultParentParent != nil)
6439 [fPresetsOutlineView expandItem:presetUserDefaultParentParent];
6443 [fPresetsOutlineView selectRowIndexes:[NSIndexSet indexSetWithIndex:[fPresetsOutlineView rowForItem: presetToMod]] byExtendingSelection:NO];
6444 [self selectPreset:nil];
6449 #pragma mark Manage Built In Presets
6452 - (IBAction)deleteFactoryPresets:(id)sender
6455 NSEnumerator *enumerator = [UserPresets objectEnumerator];
6459 NSMutableArray *tempArray;
6462 tempArray = [NSMutableArray array];
6463 /* we look here to see if the preset is we move on to the next one */
6464 while ( tempObject = [enumerator nextObject] )
6466 /* if the preset is "Factory" then we put it in the array of
6467 presets to delete */
6468 if ([[tempObject objectForKey:@"Type"] intValue] == 0)
6470 [tempArray addObject:tempObject];
6474 [UserPresets removeObjectsInArray:tempArray];
6475 [fPresetsOutlineView reloadData];
6480 /* We use this method to recreate new, updated factory presets */
6481 - (IBAction)addFactoryPresets:(id)sender
6484 /* First, we delete any existing built in presets */
6485 [self deleteFactoryPresets: sender];
6486 /* Then we generate new built in presets programmatically with fPresetsBuiltin
6487 * which is all setup in HBPresets.h and HBPresets.m*/
6488 [fPresetsBuiltin generateBuiltinPresets:UserPresets];
6489 /* update build number for built in presets */
6490 /* iterate though the new array of presets to import and add them to our presets array */
6492 NSEnumerator *enumerator = [UserPresets objectEnumerator];
6494 while (tempObject = [enumerator nextObject])
6496 /* Record the apps current build number in the PresetBuildNumber key */
6497 if ([[tempObject objectForKey:@"Type"] intValue] == 0) // Type 0 is a built in preset
6499 /* Preset build number */
6500 [[UserPresets objectAtIndex:i] setObject:[NSNumber numberWithInt:[[[[NSBundle mainBundle] infoDictionary] objectForKey:@"CFBundleVersion"] intValue]] forKey:@"PresetBuildNumber"];
6504 /* report the built in preset updating to the activity log */
6505 [self writeToActivityLog: "built in presets updated to build number: %d", [[[[NSBundle mainBundle] infoDictionary] objectForKey:@"CFBundleVersion"] intValue]];
6513 #pragma mark Chapter Files Import / Export
6515 - (IBAction) browseForChapterFile: (id) sender
6517 /* Open a panel to let the user choose the file */
6518 NSOpenPanel * panel = [NSOpenPanel openPanel];
6519 /* We get the current file name and path from the destination field here */
6520 [panel beginSheetForDirectory: [NSString stringWithFormat:@"%@/",
6521 [[NSUserDefaults standardUserDefaults] stringForKey:@"LastDestinationDirectory"]]
6523 types: [NSArray arrayWithObjects:@"csv",nil]
6524 modalForWindow: fWindow modalDelegate: self
6525 didEndSelector: @selector( browseForChapterFileDone:returnCode:contextInfo: )
6529 - (void) browseForChapterFileDone: (NSOpenPanel *) sheet
6530 returnCode: (int) returnCode contextInfo: (void *) contextInfo
6532 NSArray *chaptersArray; /* temp array for chapters */
6533 NSMutableArray *chaptersMutableArray; /* temp array for chapters */
6534 NSString *chapterName; /* temp string from file */
6537 if( returnCode == NSOKButton ) /* if they click OK */
6539 chapterName = [[NSString alloc] initWithContentsOfFile:[sheet filename] encoding:NSUTF8StringEncoding error:NULL];
6540 chaptersArray = [chapterName componentsSeparatedByString:@"\n"];
6541 chaptersMutableArray= [chaptersArray mutableCopy];
6542 chapters = [fChapterTitlesDelegate numberOfRowsInTableView:fChapterTable];
6543 if ([chaptersMutableArray count] > 0)
6545 /* if last item is empty remove it */
6546 if ([[chaptersMutableArray objectAtIndex:[chaptersArray count]-1] length] == 0)
6548 [chaptersMutableArray removeLastObject];
6551 /* if chapters in table is not equal to array count */
6552 if ((unsigned int) chapters != [chaptersMutableArray count])
6555 [[NSAlert alertWithMessageText:NSLocalizedString(@"Unable to load chapter file", @"Unable to load chapter file")
6556 defaultButton:NSLocalizedString(@"OK", @"OK")
6557 alternateButton:NULL
6559 informativeTextWithFormat:NSLocalizedString(@"%d chapters expected, %d chapters found in %@", @"%d chapters expected, %d chapters found in %@"),
6560 chapters, [chaptersMutableArray count], [[sheet filename] lastPathComponent]] runModal];
6563 /* otherwise, go ahead and populate table with array */
6564 for (i=0; i<chapters; i++)
6567 if([[chaptersMutableArray objectAtIndex:i] length] > 5)
6569 /* avoid a segfault */
6570 /* Get the Range.location of the first comma in the line and then put everything after that into chapterTitle */
6571 NSRange firstCommaRange = [[chaptersMutableArray objectAtIndex:i] rangeOfString:@","];
6572 NSString *chapterTitle = [[chaptersMutableArray objectAtIndex:i] substringFromIndex:firstCommaRange.location + 1];
6573 /* Since we store our chapterTitle commas as "\," for the cli, we now need to remove the escaping "\" from the title */
6574 chapterTitle = [chapterTitle stringByReplacingOccurrencesOfString:@"\\," withString:@","];
6575 [fChapterTitlesDelegate tableView:fChapterTable
6576 setObjectValue:chapterTitle
6577 forTableColumn:fChapterTableNameColumn
6583 [[NSAlert alertWithMessageText:NSLocalizedString(@"Unable to load chapter file", @"Unable to load chapter file")
6584 defaultButton:NSLocalizedString(@"OK", @"OK")
6585 alternateButton:NULL
6587 informativeTextWithFormat:NSLocalizedString(@"%@ was not formatted as expected.", @"%@ was not formatted as expected."), [[sheet filename] lastPathComponent]] runModal];
6588 [fChapterTable reloadData];
6592 [fChapterTable reloadData];
6596 - (IBAction) browseForChapterFileSave: (id) sender
6598 NSSavePanel *panel = [NSSavePanel savePanel];
6599 /* Open a panel to let the user save to a file */
6600 [panel setAllowedFileTypes:[NSArray arrayWithObjects:@"csv",nil]];
6601 [panel beginSheetForDirectory: [[fDstFile2Field stringValue] stringByDeletingLastPathComponent]
6602 file: [[[[fDstFile2Field stringValue] lastPathComponent] stringByDeletingPathExtension]
6603 stringByAppendingString:@"-chapters.csv"]
6604 modalForWindow: fWindow
6606 didEndSelector: @selector( browseForChapterFileSaveDone:returnCode:contextInfo: )
6610 - (void) browseForChapterFileSaveDone: (NSSavePanel *) sheet
6611 returnCode: (int) returnCode contextInfo: (void *) contextInfo
6613 NSString *chapterName; /* pointer for string for later file-writing */
6614 NSString *chapterTitle;
6615 NSError *saveError = [[NSError alloc] init];
6616 int chapters, i; /* ints for the number of chapters in the table and the loop */
6618 if( returnCode == NSOKButton ) /* if they clicked OK */
6620 chapters = [fChapterTitlesDelegate numberOfRowsInTableView:fChapterTable];
6621 chapterName = [NSString string];
6622 for (i=0; i<chapters; i++)
6624 /* put each chapter title from the table into the array */
6626 { /* if i is from 0 to 8 (chapters 1 to 9) add two leading zeros */
6627 chapterName = [chapterName stringByAppendingFormat:@"00%d,",i+1];
6630 { /* if i is from 9 to 98 (chapters 10 to 99) add one leading zero */
6631 chapterName = [chapterName stringByAppendingFormat:@"0%d,",i+1];
6634 { /* in case i is from 99 to 998 (chapters 100 to 999) no leading zeros */
6635 chapterName = [chapterName stringByAppendingFormat:@"%d,",i+1];
6638 chapterTitle = [fChapterTitlesDelegate tableView:fChapterTable objectValueForTableColumn:fChapterTableNameColumn row:i];
6639 /* escape any commas in the chapter name with "\," */
6640 chapterTitle = [chapterTitle stringByReplacingOccurrencesOfString:@"," withString:@"\\,"];
6641 chapterName = [chapterName stringByAppendingString:chapterTitle];
6642 if (i+1 != chapters)
6643 { /* if not the last chapter */
6644 chapterName = [chapterName stringByAppendingString:@ "\n"];
6649 /* try to write it to where the user wanted */
6650 if (![chapterName writeToFile:[sheet filename]
6652 encoding:NSUTF8StringEncoding
6656 [[NSAlert alertWithError:saveError] runModal];
6663 /*******************************
6664 * Subclass of the HBPresetsOutlineView *
6665 *******************************/
6667 @implementation HBPresetsOutlineView
6668 - (NSImage *)dragImageForRowsWithIndexes:(NSIndexSet *)dragRows tableColumns:(NSArray *)tableColumns event:(NSEvent*)dragEvent offset:(NSPointPointer)dragImageOffset
6672 // By default, NSTableView only drags an image of the first column. Change this to
6673 // drag an image of the queue's icon and PresetName columns.
6674 NSArray * cols = [NSArray arrayWithObjects: [self tableColumnWithIdentifier:@"PresetName"], nil];
6675 return [super dragImageForRowsWithIndexes:dragRows tableColumns:cols event:dragEvent offset:dragImageOffset];
6680 - (void) mouseDown:(NSEvent *)theEvent
6682 [super mouseDown:theEvent];
6688 - (BOOL) isDragging;